Systems Model and Offshore Oil PART SIX Systems Model and Offshore Oil

Offshore Oil: Decision to Recover The determination must be made whether cost of inputs and processing will be offset by the value of the out-put oil.

Physical Factors Affecting Recovery Ocean related factors include; Ocean Depth , Ocean currents, Icebergs & pack ice Climate/weather related factors include; Wind speeds, Storms, Monsoons, Hurricanes Oil Related factors include;  Size of the reserve, Oil quality Environmental protection factors;  Other resources like fish stocks, marine mammals, and spawning grounds would be affected in the event of an oil spill.

Human Factors Affecting Recovery Worker Safety How safe can the drill rig and production platform be for the workers?  Financial Factors include: cost of inputs - building a rig to withstand icebergs, hurricane winds, or to drill at great depths. cost of processes - transporting the oil from off-shore to land, or maintaining equipment. price of oil which is set and the you determine if enough money is recovered from the oil to exceed the cost of production.

Offshore Oil: Decision to Recover The main determinate is… … whether the cost of overcoming all other factors be offset by the price oil can be sold for and make the venture financially viable!

A Brief History of Oil Recovery Keeping the Connection to Land ~ In the 1860’s wharves were built extending 365m out into the ocean to facilitate ocean drilling off California.

A Brief History of Oil Recovery Letting go of Shore ~ In the 1920’s a drill rig was built on wooden pilings in lake Maracaibo, Venezuela.

A Brief History of Oil Recovery Moving to Steel ~ In the 1930’s a drill rig was built on steel structures in the Gulf of Mexico but it was limited to 7m of water or less.

A Brief History of Oil Recovery Letting go of the Ocean Floor ~ In 1956 the first drill ship was built allowing drilling in deeper water. These types of drill ships allowed exploration off the shores of Newfoundland.

Drill Ships

Off-shore Oil Rigs Modern Drill Rigs Submersible Rigs Jack-up Rigs Semi-submersible Anchored rigs Semi-submersible Dynamically Positioned Pg. 186 - Figure 11.4

Submersible Rigs Fixed columns ground them on the ocean floor. Usually limited to ocean depths of 20 m. For this reason they are limited to continental shelves, relatively close to shore. The rigs are floated as they are towed to drill site. Once in position ballast tanks are flooded until columns rest on ocean floor.

Submersible Rigs

Jack-Up Rigs Extendable legs ground them on the ocean floor. Are limited to a maximum ocean depth of 100 m. The jack-up is similar to the submersible in that it rests on the ocean floor. However its steel legs (Not columns) rest on ocean floor.

Jack-Up Rigs

Semi-Submersible Anchored Rigs Llimited to a max. ocean depth of 200 m. Built on land, then flooded and towed to the drill site. Water is pumped in and out of Ballast tanks to keep stability along with anchor lines. Oil is stored in pontoons until shipped on-shore. Float BUT are anchored above the drill site.

Semi-Submersible Anchored Rigs

Semi-submersible Dynamically Positioned Use thrusters to keep position above the drill site. Able to drill outside the continental shelf. Still limited to a max. ocean depth of 2000 m. Like other rigs they are towed to the drill site. Water is pumped in and out of Ballast tanks to help stability (NO anchor lines). Like the Anchored rigs oil is stored in pontoons until shipped on-shore. Note: dynamic means changing or moving.

Semi-submersible Dynamically Positioned

Hibernia Case Study Pg. 187-191