Bending Deformation

Bending Deformation

Maximum Strain

Strain / Stress Profiles

Wood Specimen that failed in bending

The Flexure Formula Applying Hooke’s Law A linear variation in strain results in a linear variation in stress.

Locating Neutral Axis. Resultant Normal Force on the Cross section = 0 dF =   dA = 0 Substitute for , in terms of max -(max /c )  y dA = 0  y dA = 0  y dA = y = location of centroid. y = 0 implies the centroidal axes are lying on the neutral axis.

Flexure Formula

Moment of Inertia Review Note: Moment of inertia is actually a misnomer. It has been adopted because of its similarity to integrals of the same form related to mass.

Parallel Axis Theorem

Composite Shapes

Determine the area moment of inertia for the rectangle shown about the axis x’ and about the axis xb.

Determine the internal moment M at the section caused by the stress distribution (1) using the flexure formula and (2) find the resultant of the stress distribution using basic principles

Determine the Moment of Inertia about the z-axis for the following I-Beam.

Determine the maximum bending stress at a-a

The strut on the utility pole supports the cable having a weight of 600 lb. Determine the absolute maximum bending stress in the strut if A, B, and C are assumed pinned.

The simply supported truss is subjected to the central distributed load. Neglect the effect of the diagonal lacing and determine the absolute maximum bending stress in the truss. Top member: 1” OD and 0.1875” wall thickness. Bottom member: 0.5” OD Solid Rod.