OPERATES MOULD AND CORE MACHINE CASTING METAL ENGINEERING CLASS XII/ SEMESTER 5 ELEMENTARY COMPETENCY 2

Langkah Pemeriksaan Pola dan Inti 1 Pemeriksaan dengan penglihatan dilakukan sejak dari pola sampai ke kotak inti Teknologi dan Rekayasa

Casting plan, face view, and beside from drawing is placed [by] beside cupola at the same direction, checked with turning around and compares 2 Teknologi dan Rekayasa

3 Checking started from diameter for principal parts, then from left of dextrorse and finally from the top (of) downwards Teknologi dan Rekayasa

4 Inspection of scale is done with ruler to dwindle, expects measure, surface gauge, and other public grader Teknologi dan Rekayasa

5 Diameter or equiamplitude surface of split-ups determined as reference and every scale which expressed at drawing is checked with sequence like at inspection with eye sight Teknologi dan Rekayasa

Core box is checked by the way of same as at cupola checking. 6 Core box is checked by the way of same as at cupola checking. If(when there is more than two core boxes, hence giving of number starts from the biggest Teknologi dan Rekayasa

THANK YOU CREATED BY : HERU KARYANA, SPd SMKN 2 KLATEN Teknologi dan Rekayasa