Your car battery is the most important component of your car. In order to keep your car in perfect condition you need to keep it clean.

Car batteries are prone to get corroded over time. The cables connecting the battery are prone to wear and tear. Car batteries function under heavy load they are prone to leakage.

Car

Battery

Removal

Procedure

Loosen the battery cable ends using a wrench. Always start by disconnecting the negative terminal. Place the wrench on the battery cable end and turn it anticlockwise. This will disconnect the battery terminals.

Make sure that the terminals have been disconnected properly. Sprinkle baking soda over the battery terminal gently. Pour a few spoons of water on each terminal. This will help get rid of corrosion by neutralizing the acid. Use a toothbrush to remove corrosion and prevent stains. Clean the cable ends with water and let it dry for a while. Smear petroleum jelly on the terminals to prevent corrosion.

RECONNECTING THE BATTERY First connect the positive battery terminal. Reconnect the negative battery terminal. Tighten the nut to using the wrench. If you notice any damaged cables get them replaced immediately.

Car Battery Maintenance Tips

Make sure you check the electrolyte level and top it up periodically. Use a voltmeter to check whether your batteries are weak. Switch off the headlights when you stop at a signal. Avoid prolonged idling. Disconnect the battery if you are not using the car for a long time.

Visit yellowpages- uae.com Get in Touch with Car Battery Services in UAE