Wireless Relay HDL-MPR02-RF.18

Description HDL-MPR02-RF.18 Wireless Relay, has 4CH dry contact, can control target by switch. This module should be configured by wireless gateway.

Connection 1. Programming button: if it is working fine, the green light will flicker, press the button three times continuously within 3s, and then the LED will flash quickly. 2. Press the ‘PROG’ button 3 times continuously within 3s in the Wireless Gateway, the LED of the Wireless Gateway will flash quickly in red, indicating it is ready to broadcast its Wireless parameters (Frequency & Password) to the Wireless Dimmer. 3. The LED of Wireless Relay will be off automatically, and then, press ‘PROG’ button of Wireless Gateway again. L N Dry contact Programming button Antenna

Channel Name: Do the Remark for easy management. Open delay: When receives the on command, will not switch on immediately but after the delay time. Close delay: When receives the off command, will not switch off immediately but after the delay time. Protect delay: If a protection delay of 1 minute is set, and the relay channel is turned off, it cannot be turned on again until 1 minute later. This is useful for loads which are not suitable to be rapidly turned on and off. 7/29/2018

Configuration You can use the panel to control the wireless relay channel.

Dry Contact The Wireless Dimmer has 4 channels dry contact.

Dry Contact Switch type: Two different Switch types - Momentary and Toggle a) Momentary Switch - When pressed, it is on, when released, it is off. Generally select ‘signal on; signal on/off; combination on/off; etc..’ b) Toggle Switch – It is bi-stable switch, you can set it on or off. Generally select “Mechanic switch” mode for this kind of switch. a) b)

Dry Contact Unqualifiedde: Set the dimming mode for each channel. Set the dimming value for each channel: 7/29/2018

Dry Contact Setting for keys: Key Enable: enable/disable the input channels. Panel Lock Key Enable: If be selected, can use panel to lock/unlock this channel. . 7/29/2018

Dry Contact Target: Can set each channel’s targets, the target’s range is 1~99. 7/29/2018