Pathways to Nursing Lora Walter, msn, rnc

Welcome 2016

Goals Connect with peers Identify academic strategy Utilize PTN Moodle Site Join PTN Mentorship Club Understand peer mentoring opportunities Study groups Peer tutoring

Chatham University Pathways to Nursing Chatham Application Accepted as a Chatham Pre-Nursing Student Shadyside School of Nursing Application and Acceptance Pathways to Nursing Student Year One Chatham University General Education and A & P Year Two SSON Year Three Pass NCLEX RN Licensure Year Four Chatham University RN-BSN Program Online Pathways to Nursing

Success Chatham SSON PTN General Education Requirements Maymester Requirements for Acceptance Strict Deadlines PTN 3.0 GPA SSON Process Floating SmartArt bullet list Select the third color-filled rectangle from the top (in the example slide, “Topic Three”) and do the following: (Basic) To reproduce the SmartArt on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Bullet List (second row, first option from the left), and then click OK to insert the graphic into the slide. To create another row, select the bottom first-level (color-filled rectangle), and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click the arrow next to Add Shape, and select Add Shape After. Select the first-level (color-filled rectangle) that you just added, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click Add Bullet. To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each level. (Note: In the example slide, the first-level text are the “Topic One,” “Topic Two,” and “Topic Three.” The second-level text are the “Supporting Text” lines.) Click the button next to Color, and then under Theme Colors select Orange, Accent 6 (first row, tenth option from the left). Select the border of the SmartArt graphic. Drag the left center sizing handle to the left edge of the slide to resize the width of the SmartArt graphic. To reproduce the rectangle effects on this slide, do the following: Press and hold CTRL, and select the three color-filled rectangles (in the example slide, these are the “Topic One,” “Topic Two,” and “Topic Three”), and do the following: Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and under Rectangles select Round Diagonal Corner Rectangle (ninth option from the left). Under SmartArt Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Presets and select Preset 7 (second row, third option from the left). To reproduce the bulleted text on this slide, do the following: On the Home tab, in the Font group do the following: Press and hold CTRL, and select the three second-level, bulleted text boxes. On the Home tab, in the Font group do the following: In the Font list, select Franklin Gothic Demi Cond. In the Font list, select Franklin Gothic Med Cond. In the Font Size box, enter 32 pt. In the Font Size box, enter 22 pt. Click Text Shadow. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Text Box in the left pane, and in the Text Box pane, under Internal margin, in the Left box enter 3”. In the Font Color list, select White, Background 1, Darker 25% (fourth row, the first option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, in the left pane select Text Box, and in the Text Box pane do the following: Select the first color-filled rectangle from the top (in the example slide, “Topic One”) and do the following: Under Text layout, in the Vertical alignment list select Middle. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane do the following: Under Internal margin, do the following: In the Left box enter 3.8”. In the Top box enter 0.2”. Click Gradient fill. In the Right box enter 0.17”. In the Type list, select Linear. In the Bottom box enter 0.2”. Click the button next to Direction, and then click Linear Right (first row, fourth option from the left). Expand the vertical size of the SmartArt graphic as needed, by dragging the top or bottom sizing handle. Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Then customize the gradient stops that you added as follows: To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Animation Pane. Select the first stop on the slider, and then do the following: Select the SmartArt graphic on the slide, and then on the Animations tab, in the Animation group, click the More arrow on the Effects Gallery and click More Entrance Effects. In the Add Entrance Effect dialog box, under Moderate select Float In, and then press OK. In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select Olive Green, Accent 3 (first row, seventh option from the left). In the Animation group, click Effect Options and do the following: Under Direction, click Float Up. Under Sequence, click One by one. In the Timing group, in the Duration list, select 01.00. In the Transparency box, enter 90% In the Animation Pane, do the following: Click the double arrow below the effect to show all the effects. Select the last stop on the list, and then do the following: Press and hold CTRL, and select all the effects. On the Animations tab, in the Timing group, in the Start list select After Previous. In the Position box, enter 100%. Press and hold CTRL, and select the second, fourth, and sixth effects (bullet float in entrance effects). On the Animations tab, in the Animation group, click the More arrow and click More Entrance Effects. In the Change Entrance Effect dialog box, under Basic select Peek In, and then click OK. In the Transparency box, enter 0%. On the Animations tab, in the Animation group, click Effect Options and under Direction, click From Left. Select the second color-filled rectangle from the top (in the example slide, “Topic Two”) and do the following: On the Animations tab, in the Timing group, in the Duration list, select 01.00. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Click the button next to Direction, and then click Linear Left (first row, fifth option from the left). Also Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear on the slider, then customize the gradient stops as follows: Click the button next to Color, and then under Theme Colors select Blue, Accent 1 (first row, the fifth option from the left). In the Position box, enter 60%. Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left). Select the next stop on the slider, and then do the following: In the Position box, enter 90%. Select the last stop on the slider, and then do the following: Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 25% (fourth row, first option from the left). Click the button next to Color, and then under Theme Colors select Black, Text 1, Lighter 50% (second row, second option from the left).

Support Academic Advisor Peer PACE Center Career Development Communication Availability Peer Peer Tutoring Supplemental Instruction PTN Moodle Site Floating SmartArt bullet list Select the third color-filled rectangle from the top (in the example slide, “Topic Three”) and do the following: (Basic) To reproduce the SmartArt on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Bullet List (second row, first option from the left), and then click OK to insert the graphic into the slide. To create another row, select the bottom first-level (color-filled rectangle), and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click the arrow next to Add Shape, and select Add Shape After. Select the first-level (color-filled rectangle) that you just added, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click Add Bullet. To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each level. (Note: In the example slide, the first-level text are the “Topic One,” “Topic Two,” and “Topic Three.” The second-level text are the “Supporting Text” lines.) Click the button next to Color, and then under Theme Colors select Orange, Accent 6 (first row, tenth option from the left). Select the border of the SmartArt graphic. Drag the left center sizing handle to the left edge of the slide to resize the width of the SmartArt graphic. To reproduce the rectangle effects on this slide, do the following: Press and hold CTRL, and select the three color-filled rectangles (in the example slide, these are the “Topic One,” “Topic Two,” and “Topic Three”), and do the following: Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and under Rectangles select Round Diagonal Corner Rectangle (ninth option from the left). Under SmartArt Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Presets and select Preset 7 (second row, third option from the left). To reproduce the bulleted text on this slide, do the following: On the Home tab, in the Font group do the following: Press and hold CTRL, and select the three second-level, bulleted text boxes. On the Home tab, in the Font group do the following: In the Font list, select Franklin Gothic Demi Cond. In the Font list, select Franklin Gothic Med Cond. In the Font Size box, enter 32 pt. In the Font Size box, enter 22 pt. Click Text Shadow. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Text Box in the left pane, and in the Text Box pane, under Internal margin, in the Left box enter 3”. In the Font Color list, select White, Background 1, Darker 25% (fourth row, the first option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, in the left pane select Text Box, and in the Text Box pane do the following: Select the first color-filled rectangle from the top (in the example slide, “Topic One”) and do the following: Under Text layout, in the Vertical alignment list select Middle. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane do the following: Under Internal margin, do the following: In the Left box enter 3.8”. In the Top box enter 0.2”. Click Gradient fill. In the Right box enter 0.17”. In the Type list, select Linear. In the Bottom box enter 0.2”. Click the button next to Direction, and then click Linear Right (first row, fourth option from the left). Expand the vertical size of the SmartArt graphic as needed, by dragging the top or bottom sizing handle. Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Then customize the gradient stops that you added as follows: To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Animation Pane. Select the first stop on the slider, and then do the following: Select the SmartArt graphic on the slide, and then on the Animations tab, in the Animation group, click the More arrow on the Effects Gallery and click More Entrance Effects. In the Add Entrance Effect dialog box, under Moderate select Float In, and then press OK. In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select Olive Green, Accent 3 (first row, seventh option from the left). In the Animation group, click Effect Options and do the following: Under Direction, click Float Up. Under Sequence, click One by one. In the Timing group, in the Duration list, select 01.00. In the Transparency box, enter 90% In the Animation Pane, do the following: Click the double arrow below the effect to show all the effects. Select the last stop on the list, and then do the following: Press and hold CTRL, and select all the effects. On the Animations tab, in the Timing group, in the Start list select After Previous. In the Position box, enter 100%. Press and hold CTRL, and select the second, fourth, and sixth effects (bullet float in entrance effects). On the Animations tab, in the Animation group, click the More arrow and click More Entrance Effects. In the Change Entrance Effect dialog box, under Basic select Peek In, and then click OK. In the Transparency box, enter 0%. On the Animations tab, in the Animation group, click Effect Options and under Direction, click From Left. Select the second color-filled rectangle from the top (in the example slide, “Topic Two”) and do the following: On the Animations tab, in the Timing group, in the Duration list, select 01.00. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Click the button next to Direction, and then click Linear Left (first row, fifth option from the left). Also Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear on the slider, then customize the gradient stops as follows: Click the button next to Color, and then under Theme Colors select Blue, Accent 1 (first row, the fifth option from the left). In the Position box, enter 60%. Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left). Select the next stop on the slider, and then do the following: In the Position box, enter 90%. Select the last stop on the slider, and then do the following: Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 25% (fourth row, first option from the left). Click the button next to Color, and then under Theme Colors select Black, Text 1, Lighter 50% (second row, second option from the left).

Documentation Add/Drop Forms SSON Forms FERPA

Peer Mentorship Club Peer Mentorship Club Membership Officers Involvement Animated floating bubbles (Intermediate) To reproduce the bubble shape effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape. Click the button next to Direction and select From Bottom Right Corner (first option from the left). In the Type box, select Radial. Click the button next to Preset Colors and select Calm Water (second row, third option from the left). Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following: In the Angle box, enter 90. In the Type box select Linear. Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following: Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt. Under Bevel, click the button next to Top and select Circle (first option from the left). In the Angle box, enter 110°. Click the button next to Lighting, and then under Special, select Glow (third option from the left). Under Surface, click the button next to Material, and then under Translucent, select Clear. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Timing group, in the Start list, select With Previous. On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear. On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK. On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide. On the Animations tab, in the Timing group, in the Duration box, enter 8. On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left. On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction. On the Animations tab, in the Animation group, click Effect Options, and then click Larger. On the Animations tab, in the Timing group, in the Delay box, enter 6. On the Animations tab, in the Timing group, in the Duration box, enter 0.1. On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade. To create the second bubble on this slide, do the following: Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. On the Animation tab, in the Advanced Animation group, click Animation Pane. Drag the bubble to a different part of the slide. Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape. In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4. In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4. On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one. In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7. In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the water background on the original template, and then click Save Background. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File. In the Insert Picture dialog box, select a picture, and then click Insert. Peer Mentorship Club

Interprofessional Collaboration Opportunity WHO: Interprofessional Education (IPE) involves interprofessional students learning with, from & about one another to improve the quality of health care.  Disciplines involved: Counseling Psychology, Nursing, Occupational Therapy, Physical Therapy & Physician Assistant. WHAT: Participation requirements include attendance and active participation in three (3) total events. HOW: Leaning occurs in Communities of Learning facilitated by faculty member(s) of IPE Taskforce.  There is one large group opening session and two (2) smaller group sessions- one later in the Fall and one in Spring. Dr. Fisher IPE Taskforce member--nursing

Send Succeed Receive Lora Walter 412.303.2393

PTN Moodle Site PTN Moodle Site Info Prepare for BSN Forums Group Study Prepare for BSN

Questions Answers