Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: Conventional model and suggested model for helical flute machining

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: (a) General grinding wheel profile, (b) geometrical design of the flute profile, and (c) elementary components of the cutting edge

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: Geometrical relationship between the wheel orientation and the elementary components of the flute

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: Spaced curve of the contact line between the wheel surface and the machined flute

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: Notation for the calculation of the contact line

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: Generated helical flute with the designed rake angle corresponding to the change of pairs (α, λ): (a) standard wheel for the fabrication of an end mill, (b) generated flute for example 1, (c) flute profile for example 1, and (d) flute profile for example 2

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: Influence of the setting parameters on the design parameters. (a) Influence of α on the core radius, (b) influence of λ on the core radius, (c) influence of α on the flute angle, (d) influence of λ on the flute angle, and (e) influence of λ on the flute angle with a constant core radius.

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: Proposed binary search algorithms: (a) main procedure to determine (α, λ) satisfying the design factors and (b) subprocedure to determine α satisfying the core radius for a given λM

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: General structure of the software

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: Results for sample 1: (a) flute profile of experiment sample, (b) flute profile of simulation sample, (c) verification of profile curve by cutting simulation, (d) 3D configuration of the generated flute, (e) overlapping profile curve of the experimental and simulated results, and (f) contact line between the wheel surface and the machined flute

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: Results for sample 2: (a) flute profile of the experimental sample, (b) flute profile of the simulation sample, (c) verification of the profile curve by the cutting simulation, and (d) 3D configuration of the generated flute

Date of download: 11/11/2017 Copyright © ASME. All rights reserved. From: A New Method for Determination of Wheel Location in Machining Helical Flute of End Mill J. Manuf. Sci. Eng. 2016;138(11):111003-111003-11. doi:10.1115/1.4033232 Figure Legend: Illustration of computation of the core radius