SHERINE RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

Slides:

Advertisements

Similar presentations

Construction Method, Material Selection & Building Services

Advertisements

Sungkyunkwan University

Chp12- Footings.

Bridge Engineering (6) Superstructure – Concrete Bridges

Structural System Overview

Loads and Load Paths "Architecture is inhabited sculpture."

CE A434 – Timber Design Structural Behavior.

CEA UNIT 3 TERMS & DEFINITIONS. BEAM A structural member, usually horizontal, that carries a load that is applied transverse to its length.

Structural Principles and Landscapes Over Structure GSD 6242 Ecologies, Techniques, Technologies IV Spring 2015Niall Kirkwood FASLA Alistair McIntosh FASLA.

Bridge Engineering (7) Superstructure – Reinforced Concrete Bridges

CIVL3310 STRUCTURAL ANALYSIS

Common Architecture Terms. Fenestration The design and placement of windows in a building.

UNIT-I STANDARD SPECIFICATION FOR ROAD BRIDGE

Bridge Design part 1 By Alan Pennington, materials taken from and adapted West Point Bridge Design.

BRIDGE BUILDING Overview.

Approximate Analysis of Statically Indeterminate Structures

Rectangular framed structures

University of Sydney – DESA 1102 Structures LOADS & SUPPORTS Peter Smith & Mike Rosenman General Structural Concerns Functionality / Stiffness deformations.

Forging new generations of engineers

BEAMS,COLUMS AND LINTELS

Beam Analysis Civil Engineering and Architecture

BEAMS AND COLUMNS.

Reading Structural Drawings

© 2010 Delmar, Cengage Learning Instructor Resources for Lesson B Building Basics.

STRUCTURE By Simonnett Rosenberg Gabriela Di Lorenzo.

BEAMS AND COLUMNS PRESENTED BY K.ROSHIN RUKSHANA.

Frames and Walls Lateral Stability

TOPICS COVERED Building Configuration Response of Concrete Buildings

TYPES OF BEAMS. TYPES OF BEAMS Type of Beams Simply Supported Beam Overhanging Beam Cantilever Beam Statically Determinate beam Simply Supported Beam.

The four basic types of structures are :

Claudia Pérez Laura Rendeiro

BEAMS: Beams are structural members that can carry transverse loads which produce bending moments & shear force. Girders: Main load carrying members into.

BFC (Mechanics of Materials) Chapter 7: Statically Determinate Plane Trusses Shahrul Niza Mokhatar

Engineering Mechanics: Statics

Structural Systems Design of the Lincoln Fire Department Headquarters Michelle Burback Structural Engineering Capstone and Senior Honors Project.

Building Construction

SECTION 8 - RACKING (BRACING) AND SHEAR FORCES STUDENT HANDOUT

 GOVERNMENT ENGINEERING COLLEGE, VALSAD  SUBJECT : MECHENICS OF SOLID ( )  TOPIC : SUPPORT REACTION.

Mrs. RESHMA RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

SHERINE RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

Lesson 5: Gravity Load Path

Design & Engineering CAMS South

Shantilal shah engineering college Bhavnagar

Introduction Used for covering spaces in the form of roof or floor

Truss: Types and Classification

Structures-Trusses.

Forging new generations of engineers

Prepared by John R. Henry, P.E. Senior Staff Engineer

SHERINE RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

SHERINE RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

Department of Building Engineering Pharmaceutical factory

SHERINE RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

STRENGTH OF MATERIALS UNIT-2 PROPPED CANTILEVER

SHERINE RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

Mrs. RESHMA RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

Beam Analysis We require from buildings two kinds of goodness: first, the doing their practical duty well: then that they be graceful and pleasing in doing.

Chapter No. 04 Equilibrium

Building section A vertical cut or slice through a structure that illustrates the type of foundation, wall, and roof construction to be used.

Structural Technical Report #4: Lateral System Analysis Study

Building Construction I Sofia Sebastian 1

Beam Analysis We require from buildings two kinds of goodness: first, the doing their practical duty well: then that they be graceful and pleasing in doing.

Equilibrium Of a Rigid Body.

1.STRUCTURE : A structure is an assemblage of components which are connected in such a way that the structure can withstand the action of loads that are.

Masonry Bearing Walls.

Structure II Course Code: ARCH 209 Dr. Aeid A. Abdulrazeg.

Civil Engineering and Architecture

Lesson 5: Gravity Load Path

Presentation transcript:

SHERINE RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

SHERINE RAJ BASIC DEFINITIONS 5/7/2.017

STRUCTURE Defined as a framework that carries external loads. Composed of interconnected members. Connected by rigid joints or frictionless hinges. SHERINE RAJ BASIC DEFINITIONS 5/7/2017

SUPERSTRUCTURE Superstructure of a building is the portion of the Structure above the foundation. It provides the necessary utility of the building with comfort, Structural safety, ventilation, etc. SHERINE RAJ BASIC DEFINITIONS 5/7/2017

TYPES Beam Column Slab Lintel Roofing Flooring plastering SHERINE RAJ BASIC DEFINITIONS 5/7/2017

BEAMS SHERINE RAJ BASIC DEFINITIONS 5/7/2017

CLASSIFICATION OF BEAM SIMPLY SUPPORTED BEAM OVERHANGING BEAM CANTILEVER BEAM FIXED BEAM PROPPED CONTINUOUS BEAM SHERINE RAJ BASIC DEFINITIONS 5/7/2017

COLUMN SHERINE RAJ BASIC DEFINITIONS 5/7/2017

CLASSIFICATION OF COLUMN Long Column/ Slender Short Column Intermediate Column SHERINE RAJ BASIC DEFINITIONS 5/7/2017

SLAB SHERINE RAJ BASIC DEFINITIONS 5/7/2017

CLASSIFICATION OF SLAB ONE WAY TWO WAY FLAT SHERINE RAJ BASIC DEFINITIONS 5/7/2017

ACTIVITY SHERINE RAJ BASIC DEFINITIONS 5/7/2017

LOAD ACTION ON A STRUCTURE Dead Load Live Load Wind load Seismic load Snow load SHERINE RAJ BASIC DEFINITIONS 5/7/2017

LOAD TRANSFORM SLAB BEAM COLUMN SHERINE RAJ BASIC DEFINITIONS 5/7/2017

Thank you SHERINE RAJ BASIC DEFINITIONS 5/7/2017