Computer Skills For Preparatory Programs Chapter 2 Looking at Computers: Understanding the Parts Chapter 2 takes a look at the different parts of a computer. Imam - University 2

Chapter Objectives After reading this chapter, you should be able to answer the following questions: What exactly is a computer, and what are its four main functions? What is the difference between data and information? What are bits and bytes, and how are they measured? What devices do I use to get data into the computer? What devices do I use to get information out of the computer? What’s on the motherboard? Where are information and programs stored? How are devices connected to the computer? How do I set up my computer to avoid strain and injury? Imam - University

Chapter Topics Functions of a computer Data versus information Bits and bytes Input devices Output devices Processing Storage Ergonomics Chapter topics include: Functions of a computer The difference between data and information The definition of bits and bytes Input devices Output devices System unit Ergonomics 3

Computers Are Data Processing Devices A computer’s four major functions: Gathers data (users input data) Processes data into information Outputs data or information Stores data and information Strictly defined, a computer is a data processing device that performs four major functions: 1. It gathers data (or allows users to input data). 2. It processes that data into information. 3. It outputs data or information. 4. It stores data and information. 4

Data vs. Information Data: Representation of a fact, figure, or idea Information: Organized, meaningful data Data is a representation of a fact, figure, or idea. Data can be a number, a word, a picture, or even a recording of sound. For example, the number 6125553297 and the names Derek and Washington are pieces of data. Information is data that has been organized or presented in a meaningful fashion. When your computer provides you with a contact listing that indicates Derek Washington can be reached by phone at (612) 555-3297, the data mentioned earlier suddenly becomes useful—that is, it becomes information. 5

Bits and Bytes: The Language of Computers Binary digit 0 or 1 Byte 8 bits Each letter, number, and character = a string of eight 0s and 1s In order to process data into information, computers need to work in a language they understand. This language, called binary language, consists of just two digits: 0 and 1. Everything a computer does is broken down into a series of 0s and 1s. Each 0 and 1 is a binary digit, or bit for short. Eight binary digits (or bits) combine to create 1 byte. In computers, each letter of the alphabet, each number, and each special character (such as the @ sign) consists of a unique combination of 8 bits, or a string of eight 0s and 1s. As it turns out, if 8 bits are put together, there are 256 possible combinations. That number of combinations allows for a code that can include all the uppercase and lowercase letters of the alphabet, all 10 digits, punctuation marks, and many other much-used symbols. We call these 8 bits working together a byte. Bytes are the basic measurement for storage in a computer. 0000 1111 6

How Much Is a Byte? Not only are bits and bytes used as the language that tells the computer what to do, they are also what the computer uses to represent the data and information it inputs and outputs. Kilobytes, megabytes, and gigabytes are therefore simply amounts of bytes. 7

Computer Software Software: Programs that enable hardware to perform different tasks Application software System software Software is the set of computer programs that enables the hardware to perform different tasks. There are two broad categories of software: application software and system software. Application software is the set of programs you use on a computer to help you carry out tasks. If you’ve ever typed a document, created a spreadsheet, or edited a digital photo, for example, you’ve used a form of application software. System software is the set of programs that enables your computer’s hardware devices and application software to work together. The most common type of system software is the operating system (OS). It manages the computer system’s hardware—such as the monitor and the printer. The operating system also provides a means by which users can interact with the computer. 8

Hardware: Any part of the computer you can touch Computer Hardware Hardware: Any part of the computer you can touch Hardware components consist of the system unit and peripheral devices, such as monitors and printers that are connected to the computer. Other hardware devices, such as routers, help a computer communicate with other computers to facilitate sharing documents and other resources. Together, the system unit and peripheral devices perform four main functions: they enable the computer to input data, process that data, and output and store the data and information. 11

Each part of the computer serves a special function. Imam - University

Types of Computers Notebook: Portable computer Desktop: Used at a single location Mainframe: Supports hundreds of users simultaneously Supercomputer: Performs complex calculations rapidly Embedded: Self-contained computer performing dedicated functions The two basic designs of computers are notebooks (or laptops), which are portable and powered by batteries or an electrical outlet, and desktops, which are not as easily moved from location to location. These are also known as personal computers (PCs). Notebook computer components such as the keyboard and monitor are integrated into a single computer case and desktop computers have a case that houses the system unit and peripheral devices, such as monitors and printers that are connected to the computer. The Apple iMac packs its components into an all-in-one design. Mainframe computers can execute many different computer programs at the same time and are often used in insurance companies and colleges and universities. Supercomputers are used to perform intensive mathematical calculations such as weather forecasting. Embedded computers are computer chips that reside inside other devices such as your car, thermostat, or microwave. Copyright © 2011 Pearson Education, Inc. Publishing as Prentice Hall 8

Input Devices Devices used to enter information or instructions into the computer Keyboard Mouse/ pointing device Stylus Scanner Digital camera Microphone An input device enables you to enter data (text, images, and sounds) and instructions (user responses and commands) into the computer. The most common input devices are the keyboard and the mouse. You use keyboards to enter typed data and commands, whereas you use the mouse to enter user responses and commands by clicking on an icon. There are other input devices as well: microphones input sounds; scanners and digital cameras input nondigital text and digital images. Styluses (devices that look like skinny pens but have no ink) and electronic pens are also becoming quite popular and are often used in conjunction with graphics tablets that can translate a user’s handwriting into digital input. Imam - University 12

Keyboards The QWERTY layout is standard on most PCs. Enhanced keyboard features include number, function, and navigation keys. The QWERTY layout gets its name from the first six letters in the top-left row of alphabetic keys on the keyboard. The QWERTY layout was originally designed for typewriters, not computers, and was meant to slow typists to prevent typewriter keys from jamming. The QWERTY layout is therefore considered inefficient because it slows typing speeds. Enhanced keyboard features include number, function, and navigation keys. Imam - University 13

Specialty Keyboards Notebook keyboard PDA stylus Tablet PCs Wireless keyboard notebook keyboards are more compact than standard keyboards and therefore have fewer keys. Still, a lot of the notebook keys have alternate functions so that you can get the same capabilities from the limited keys as you do from the special keys on standard keyboards. Generally, you enter data and commands into a PDA using a stylus, a pen-shaped device that you use by tapping or writing on the PDA’s touch-sensitive screen. Tablet PCs are similar to notebook PCs but also feature a touch-sensitive screen and handwriting recognition software. Tablet PCs also allow user input via a stylus. Although most desktop PCs ship with wired keyboards, wireless keyboards are available. These keyboards are powered by batteries and send data to the computer using a form of wireless technology. Imam - University 14

Mice Optical mouse Trackball Wireless Needs no mouse pad Doesn’t need cleaning Is more expensive Trackball Easier on wrists Stays stationary on desk Wireless Uses radio or light waves The optical mouse uses an internal sensor or laser to detect the mouse’s movement. Optical mice have no moving parts on the bottom, so there is no way for dirt to interfere with the mechanisms and less chance of parts breaking down. A trackball mouse remains stationary and doesn’t demand much wrist motion, so it’s considered healthier on the wrists. Wireless mice send data to the computer by radio or light waves. Imam - University 17

Other Input Devices Scanners Digital cameras Text Images Video Flatbed scanner Handheld scanner Other input devices include scanners and cameras. Scanners copy images from existing sources, digitize them, and make them available for editing or processing in the computer as well as viewing on the screen. Digital cameras make a digital file of an image for editing, printing, or distribution on the Web. Digital movies can be created with a digital video camera and can be edited and distributed electronically. Digital camera Camcorder Imam - University 17

Other Input Devices EPOS Digital Pen Webcam Live video The EPOS Digital Pen works in conjunction with a flash drive. You can write with the pen on any conventional paper, and your writing is captured and then wirelessly transmitted and stored in the flash drive. When the flash drive is connected to a computer, you can use software to translate your writing into digital text. Webcams are small cameras that usually sit on top of your computer monitor or are built into your notebook computer. Although some webcams are able to capture still images, webcams generally are used to transfer live video directly to your computer. Imam - University 17

Inputting Sound Microphones are used for: broadcasts Video-conferencing Internet phone calls Speech recognition A microphone allows you to capture sound waves and transfer them in digital format to your computer. Microphones come with most computers. If you didn’t get a microphone with yours, you may want to buy a desktop microphone if you plan to record your own audio files. Microphones come in two basic types. Unidirectional microphones pick up sound from only one direction. Omnidirectional microphones pick up sounds from all directions at once. A headset microphone is best for video conferencing and speech-recognition uses. Videoconferencing technology allows a person sitting at a computer equipped with a personal video camera and a microphone to transmit video and audio across the Internet (or other communications medium). In speech-recognition systems, you operate your computer through a microphone, telling it to perform specific commands or to translate your spoken words into data input. Windows Vista now includes speech recognition as part of the basic operating system. Imam - University 17

Input Devices for the Physically Challenged Visual impairments Voice recognition Keyboards with large keys On-screen keyboards Motor control issues Special trackballs Head-mounted devices Visually impaired users can input data from voice recognition or by using large keyboards, including touch-screen keyboards. Users with severe motor control problems can use special trackballs designed for one-finger use that can be mounted anywhere. When arm motion is severely restrained, head-mounted pointing devices can be used. Imam - University 22

Output Devices Send processed data out of the computer Monitors Printers Output devices make: Soft copies (video, sounds, control signals) Hard copies (print) Output devices enable you to send processed data out of your computer. This can take the form of text, pictures (graphics), sounds (audio), and video. One common output device is a monitor, which displays text, graphics, and video as soft copies (copies you can see only on-screen). Another common output device is a printer, which creates tangible or hard copies of text and graphics. Speakers are output devices for sound. Imam - University 23

Monitor Types CRT (Cathode-Ray Tube) LCD (Liquid Crystal Display) Less expensive Uses much more space Uses more energy Offers better viewing angles Legacy technology LCD (Liquid Crystal Display) More expensive Uses far less space More energy efficient Less viewable from an angle There are two basic types of monitors: CRTs and LCDs. If your monitor looks like a traditional TV set, it has a picture tube device called a cathode-ray tube (CRT). If your monitor is flat, such as those found in laptops, it is using liquid crystal display (LCD) technology. CRT monitors are fast becoming legacy technology--computing devices that use techniques, parts, and methods that are no longer popular. Imam - University 24

LCD Monitor Features Screens are grids made up of millions of pixels Each pixel is composed of red, blue, and green subpixels Liquid crystal is sandwiched between two transparent layers to form images Monitor screens are grids made up of millions of pixels, or tiny dots. Illuminated pixels create images on the monitor. There are three subpixel colors: red, blue, and green. LCD monitors are made of two (or more) sheets of material filled with a liquid crystal solution. A fluorescent panel at the back of the LCD monitor generates light waves. When electric current passes through the liquid crystal solution, the crystals move around, either blocking the fluorescent light or letting the light shine through. This blocking or passing of light by the crystals causes images to be formed on the screen. Copyright © 2011 Pearson Education, Inc. Publishing as Prentice Hall 25

LCD Quality Factors Resolution Viewing angle Contrast ratio Brightness Response time The most important factor to consider when choosing an LCD monitor is resolution. The higher the resolution, the sharper and clearer the image will be. Viewing angle: How far you can move to the side of (or above or below) the monitor before the image quality degrades to unacceptable levels. Contrast ratio: A measure of the difference in light intensity between the brightest white and the darkest black that the monitor can produce. Brightness: A measure of the greatest amount of light showing when the monitor is displaying pure white. Response time: The time it takes for a pixel to change color. The lower the response time, the clearer moving images will appear. Imam - University 26

Other Video Output Touch-screen monitors Projectors Double as both input and output devices Projectors Project a computer image to a large screen for sharing with large groups Touch-screen monitors act as input and output devices rolled into one. They are becoming more common on home computers. People with limited motor control are often greatly assisted by touch-screen monitors. Data projectors, like the inexpensive one shown on the slide, project a computer image to a large screen for sharing with large groups. Commonly used in education and business, they are becoming less expensive and more portable, making them an attractive option in the digital home. Imam - University 28

Printers Impact printers Nonimpact printers Specialty printers Dot-matrix Nonimpact printers Inkjet Laser Specialty printers Multifunction(all in one) Plotters Thermal printers There are two primary categories of printers: impact and nonimpact. Impact printers have tiny hammer-like keys that strike the paper through an inked ribbon, making a mark on the paper. The most common impact printer is the dot-matrix printer. Dot-matrix printers are a legacy technology. In contrast, nonimpact printers spray ink or use laser beams to transfer marks onto the paper. The most common nonimpact printers are inkjet printers and laser printers. There are also a number of specialty printers on the market, including multifunction (also known as all-in-one) printers, plotters, and thermal printers. Imam - University 29

Nonimpact Printers Inkjet Laser Less expensive device Print high-quality color images cost effectively Laser More expensive device Faster printing speed Less expensive per page in B&W Color lasers are becoming less expensive Inkjet printers work by spraying tiny drops of ink onto paper. When using the right paper, higher-end inkjet printers print images that look like professional-quality photos. Because of their high quality and low price, inkjet printers are the most popular printers for color printing. Laser printers are often preferred for their quick and quiet production and high-quality printouts. Although more expensive to buy than inkjet printers, over the long run, for high-volume printing, laser printers are more economical than inkjets (they cost less per printed black-and-white page) when you include the price of ink and special paper in the overall cost. Recently, the prices of color laser printers have fallen, making them price competitive with high-end inkjet printers. Imam - University 30

Choosing a Printer Speed (ppm) Resolution (dpi) Color output Memory Use and cost Cost of consumables Speed: A printer’s speed determines how many pages it can print per minute (called pages per minute, or ppm). Printing speeds range from 8 to 38 ppm for both laser and inkjet printers. Resolution: A printer’s resolution (or printed image clarity) is measured in dots per inch (dpi). The higher the dpi, the greater the level of detail and quality of the image. For general-purpose printing, 300 dpi is sufficient; for printing photos, 1,200 dpi is better. Color output: Some printers come with a single ink cartridge for all colors; others have two ink cartridges, one for black and one for color. The best setup is to have individual ink cartridges for each color, so you can replace only the specific color cartridge that is empty. Memory: Printers need memory in order to print. Inkjet printers run slowly if they don’t have enough memory. If you plan to print small text-only documents on an inkjet printer, 1 to 2 megabytes (MB) of memory should be enough. Graphics-heavy files require 8 megabytes (MB) of memory, and laser printers should have at least 16 megabytes (MB) of memory. Use and cost: If you will be printing mostly black-and-white, text-based documents or will be sharing your printer with others, a black-and-white laser printer is best because of its printing speed and overall economies for volume printing. If you’re planning to print color photos and graphics, an inkjet printer or color laser printer is a must, even though the cost per page will be higher. Cost of consumables: You should investigate carefully the cost of consumables (printer cartridges and paper) for any printer you are considering purchasing. Imam - University 31

Outputting Sound Speakers and headphones Most computers include inexpensive speakers as an output device for sound. These speakers are sufficient to play the standard audio clips you find on the Web and usually enable you to participate in teleconferencing. If you plan to digitally edit audio files or are particular about how your music sounds, you may want to upgrade to a more sophisticated speaker system, such as one that includes subwoofers and surround-sound. Headphones are recommended for notebooks when they are used in proximity to others. Imam - University 32

The System Unit Box that contains the central electronic components of the computer: CPU/RAM/ motherboard Expansion cards Power supply Storage devices The system unit is the box that contains the central electronic components of the computer, including the computer’s processor, memory, and circuit boards. You’ll also find the power source and all the storage devices (CD/DVD drive and hard drive) in the system unit. In a notebook computer, the system unit, monitor, and keyboard are combined into a single unit. Imam - University 33

RAM vs. ROM Random access memory (RAM): Read-only memory (ROM): Stores instructions and data Temporary (volatile) storage Consists of several memory cards or modules Read-only memory (ROM): Stores start-up instructions Permanent storage Random access memory (RAM) is a series of small cards or modules plugged into slots on the motherboard. The CPU can request any data in RAM. It is then located, opened, and delivered to the CPU for processing in a few billionths of a second. Because all the contents of RAM are erased when you turn off the computer, RAM is the temporary or volatile storage location for the computer. To save data more permanently, you need to save it to the hard drive or to another permanent storage device such as a CD or flash drive. Read-only memory (ROM) holds all the instructions the computer needs when it is powered on. The data does not get erased when the power is turned off. Copyright © 2011 Pearson Education, Inc. Publishing as Prentice Hall 44

The Front Panel Power control Drive bays Memory card reader Productivity ports The front panel of your computer provides you with access to power controls as well as to the storage devices on your computer. Drive bays are special shelves reserved for storage devices. Some drive bays are internal (cannot be seen from outside the system unit) and others are external, such as CD and DVD drives. Some PCs include memory card readers and productivity ports on the front, including USB and FireWire, used for peripherals and image downloading. Imam - University 34

Power Controls Power-on button: Turns on system, should not be used to turn it off Other options: Sleep mode Hibernation Your system has a power-on button on the front panel. Although you use this button to turn on your system, you don’t want to use it to turn off your system. You turn off the power by clicking on a shutdown icon on the desktop. When your computer enters Sleep mode, all the documents, applications, and data you were using are stored in RAM, from which they are quickly accessible upon restarting your computer. Hibernation is another power-saving mode that stores your data in memory and saves it to your computer's hard disk. . Imam - University 35

Drive Bays Internal drive bays: External drive bays: Cannot be access from outside the system Are reserved for internal hard drives External drive bays: Can be accessed from outside the system CD or DVD drives Floppy and zip drives Drive bays are special shelves reserved for storage devices. Internal drive bays cannot be seen or accessed from outside the system unit. They are reserved for internal hard drives. External drive bays can be seen and accessed from outside the system unit. External drive bays house CD and DVD drives, for example. Empty external drive bays are covered by a faceplate. Some computers still have floppy or disc drives. However, manufacturers are now charging extra for these and tend to provide more USB ports to accommodate the use of flash drives and external hard drives. Imam - University 36

Hard Disk Drive Permanent (nonvolatile) storage Internal or external versions The hard disk drive is your computer’s primary device for permanent storage of software and documents. The hard disk drive is a nonvolatile storage device, meaning that it holds the data and instructions your computer needs permanently, even after the computer is turned off. Originally, all hard disk drives were installed inside the system unit. Today, external hard drives are readily available. Imam - University 36

Flash Drives/Flash Memory Flash drives (jump drives) Newer storage alternative Plug into USB ports Flash memory cards Slide into slots in the system Flash drives, sometimes referred to as jump drives, USB drives, or thumb drives, are the new alternative to storing portable data. They plug into USB ports. Several manufacturers now also include slots on the front of the system unit in which you can insert portable flash memory cards. Many notebooks also include slots for flash memory cards. Flash memory cards let you transfer digital data between your computer and devices such as digital cameras, PDAs, smartphones, video cameras, and printers. Imam - University 38

Storage Media Capabilities Here you see the storage capacities of the various portable storage media used in your computer’s drive bays. As you learned, storage capacity is measured in bytes. Imam - University 39

On the Back Ports for peripherals Types of ports: Serial and parallel Audio and video USB FireWire Connectivity Ethernet Modem Ports are the places on the system unit where peripheral devices attach to the computer so that data can be exchanged between them and the operating system. Some ports are on the front of the system unit. The ports on the back of the computer are mostly designed for long-term connections. Imam - University 38

Inside the System Unit Essential electronic components used to process data Types of components: Power supply Hard disk drive Motherboard CPU Expansion cards The system unit contains the essential components of a computer. Inside are the power supply, motherboard, RAM, storage drives, expansion cards, and central processing unit. Today’s personal computer follows the same design concept as IBM’s first PC in 1981 did. All the components have evolved, but the foundation and concepts are the same. Imam - University 41

The Motherboard CPU RAM Expansion cards and slots Built-in components The motherboard is the key circuit board holding the essential processing parts. Attached directly to the motherboard are the CPU, RAM, expansion cards, and in many new computers, networking, modem, video, and audio components. Imam - University 42

Central Processing Unit (CPU) Referred to as the “brains” of the computer Controls all functions of the computer Processes all commands and instructions Can perform billions of tasks per second The central processing unit (CPU, or processor) is the largest and most important chip in the computer. It is sometimes referred to as the “brains” of the computer because it controls all the functions performed by the computer’s other components and processes all the commands issued to it by software instructions. Modern CPUs can perform three billion tasks a second without error, making them extremely powerful components. Imam - University 43

Expansion Cards Add functions Provide new connections for peripheral devices Common types: Sound Modem Video (VGA) Network (NIC) The various circuit boards connected to the motherboard have specific functions that augment the computer’s basic functions. Some provide connections to other devices; these are usually referred to as expansion cards. Typical expansion cards found in the system unit are the sound card and the video card. Other expansion cards provide a means for network and Internet connections, such as the network interface card (NIC), which enables your computer to connect with other computers. Imam - University 44

Setting It All Up: Ergonomics Ergonomics: minimizing injury or discomfort while using the computer Steps to follow: Position monitor correctly Use adjustable chair Assume proper position while typing Take breaks Ensure adequate lighting In terms of computing, ergonomics refers to how you set up your computer and other equipment to minimize your risk of injury or discomfort. The following are some guidelines that can help you avoid discomfort, eyestrain, or injuries while you’re working at your computer: Position your monitor correctly. This should be at least 25 inches from your eyes and at eye level or so that it is at an angle 15 to 20 degrees below your line of sight. Purchase an adjustable chair. Adjust the height of your chair so that your feet touch the floor. The chair should include back support. Assume a proper position while typing. Your wrists should be flat with respect to the keyboard, and your forearms should be parallel to the floor. Specially designed ergonomic keyboards and wrist rests can help you achieve the proper position for your wrists. Take breaks from computer tasks. Ensure that the lighting is adequate. Copyright © 2011 Pearson Education, Inc. Publishing as Prentice Hall 46

Using proper equipment that is adjusted correctly helps prevent repetitive strain injuries while working at a computer. Imam - University

Chapter Summary What exactly is a computer, and what are its four main functions? What is the difference between data and information? What are bits and bytes, and how are they measured? What devices do I use to get data into the computer? What devices do I use to get information out of the computer? What’s on the motherboard? Where are information and programs stored? How are devices connected to the computer? How do I set up my computer to avoid strain and injury? Imam - University

Chapter 3 :Application Software: Programs That Let You Work and Play The End Next : Chapter 3 :Application Software: Programs That Let You Work and Play Imam - University