Database requirements from ITk-Strips for DAQ loads Jiri Kroll, on behalf of ITK strips community

Contents Breakdown of components for Strips Upgrade Max numbers of parts in the Build DAQ loads Summary Meeting on ITk production databases

Strip Tracker Components I act as the contact from the strips to the production database designers at Unicorn College This talk has is an update to the presentation Andy Blue gave last year at the production database meeting in Prague It has Updated layout More components (power boards, HV switches etc) Will use this info as the input to you Meeting on ITk production databases

Strip Tracker ‘Parts’ Very simplistic outline for just now Stave/ Petal Cores Glues HV Mutiplexing Tapes Eos Staves/Petals Sensors ABC ASICs Modules Hybrids HCCs Will work this way Power boards Hybrid Panels Meeting on ITk production databases

Strip Tracker Components From LOI CERN-LHCC-2012-022 ; LHCC-I-023 Meeting on ITk production databases

Strip Tracker Components HCC Multiplexing ASIC Sensor Hybrid LV Powering Board (Liverpool, RAL & BNL) ABC ASIC Barrel Module: Composed of 2 Hybrids and 1 sensor Each Hybrid has 10 x ABC130 readout chips 1 x HCC multiplexing chip 1 x LV Powering board Meeting on ITk production databases

Strip Tracker Components R5 module R4 module R3 module R2 module R1 module R0 module S0 S1 H0 H1 H2 H3 Petal: Composed of 5 different modules with 13 Hybrid variants 7-12 x ABC130 readout chips /Hybrid ~1 x HCC multiplexing chi/Hybrid ~1 x LV Powering board Meeting on ITk production databases

And Finally Endcap Totals Modules 8064 Hybrids 11648 ABC ASICs 107832 HCCs Barrel Totals Modules 10976 Hybrids 14784 ABC ASICs 147840 HCCs Meeting on ITk production databases

Present day WE have approximately 20 sites ready to test DAQ loads DAQ loads contain hybrid HCC ABC130 mini sensor Frame Plan for 40 DAQ loads Each DAQ load has an identification code Meeting on ITk production databases

What do we want We want to compare ASIC (ABC130 and HCC) tests before and after they are assembled into the DAQ loads DAQ load tests from 20 institutes from around the world for comparison plots Meeting on ITk production databases

What do we want to record? – DAQ loads Item Data Type Comments DAQ load eps & txt 3 Point Gain Threshold Noise Occupancy # dead, masked channels ABC + HCC ASICs Wafer map, .dat, txt. .eps Wafer tests Meeting on ITk production databases

DAQ loads From tests we produce output (txt) files that have for each channel the Channel no. Gain Offset noise Meeting on ITk production databases

ASICs # Information on the ASICS (ABC130 and HCC) are recorded when they are wafer probed We want the database to link the results from the wafer probing to the DAQ load tests ABCn25 data (per asic) #chan code vt50 gain offset innse 0 1000 169.1 81.0 7.6 533 1 1000 170.4 80.5 8.5 548 2 1000 167.1 82.0 3.0 543 3 1000 169.2 82.6 4.3 508 4 1000 164.3 81.5 0.9 481 5 1000 166.8 80.5 5.4 559 6 1000 166.4 81.6 3.6 469 7 1000 168.7 80.8 7.2 522 8 1000 160.7 80.8 -1.2 532 9 1000 168.1 81.0 6.0 500 10 1000 167.5 80.9 6.0 542 Meeting on ITk production databases

Time frames Is it possible to have a timeframe on when we should have such a database for these comparison tests? Do we need write the application to allow us to upload the files to the database? Meeting on ITk production databases