Date of download: 11/13/2017 Copyright © ASME. All rights reserved. From: Time-Dependent Fracture and Defect Assessment of Welded Structures at High Temperature J. Pressure Vessel Technol. 2005;128(4):556-565. doi:10.1115/1.2349567 Figure Legend: Finite element models for CT specimens with a mismatched cross-weld

Date of download: 11/13/2017 Copyright © ASME. All rights reserved. From: Time-Dependent Fracture and Defect Assessment of Welded Structures at High Temperature J. Pressure Vessel Technol. 2005;128(4):556-565. doi:10.1115/1.2349567 Figure Legend: Comparison of the predicted ηw factor and the FE solutions for CT specimens with weld width W∕h=10 and different mismatch ratios

Date of download: 11/13/2017 Copyright © ASME. All rights reserved. From: Time-Dependent Fracture and Defect Assessment of Welded Structures at High Temperature J. Pressure Vessel Technol. 2005;128(4):556-565. doi:10.1115/1.2349567 Figure Legend: Comparison of the predicted ηw factor and the FE solutions for CT specimens with weld width W∕h=10 and different crack locations in weld line

Date of download: 11/13/2017 Copyright © ASME. All rights reserved. From: Time-Dependent Fracture and Defect Assessment of Welded Structures at High Temperature J. Pressure Vessel Technol. 2005;128(4):556-565. doi:10.1115/1.2349567 Figure Legend: Thin-walled cylinder with fully circumferential crack in the weld center under tension

Date of download: 11/13/2017 Copyright © ASME. All rights reserved. From: Time-Dependent Fracture and Defect Assessment of Welded Structures at High Temperature J. Pressure Vessel Technol. 2005;128(4):556-565. doi:10.1115/1.2349567 Figure Legend: Comparison of TDFADs for cylinder with different cracks in the weld center and for the cylinder made of homogeneous metals (t=1000h)

Date of download: 11/13/2017 Copyright © ASME. All rights reserved. From: Time-Dependent Fracture and Defect Assessment of Welded Structures at High Temperature J. Pressure Vessel Technol. 2005;128(4):556-565. doi:10.1115/1.2349567 Figure Legend: Variation of TDFAD with service time for the cylinder with a∕T=0.5, 2h=0.5T (for M<1, base metal: Mt1 and weld metal: Mt3)