Bendix King EPH and GPH Portable Radios CORDELIA FIRE PROTECTION DISTRICT Bendix King EPH and GPH Portable Radios July 2014 CFPD

"Train as if your life depends on it...BECAUSE IT DOES!" July 2014 Cordelia Fire District

Important Information This PowerPoint presentation is being presented to familiarize fire personnel to the basic operations of the Bendix King EPH and GPH portable radio. It does not necessarily cover every aspect of the radio and encourages personnel to read the publications titled: “EPH Portable Radio Owner’s Manual” or “GPH Portable Radio Owner’s Manual” July 2014 Cordelia Fire District

Cordelia Fire District Objectives Review basic specifications & features Learn to switch between groups Learn to create and alter a scan list Learn to select a tone Learn the basic functions of the Priority Toggle July 2014 Cordelia Fire District

Specifications & Features EPH: 210 Channels 15 Groups, each group has 14 channels GPH: 240 Channels 15 Groups, each has 16 channels Field Programmable Rechargeable battery and AA Battery “Clamshell” User Programmable Scan and Priority Scan User Programmable Repeater Access Tones Note: Group 15 left open for incident radio plan cloning July 2014 Cordelia Fire District

Battery Removal & Installation Lock tab on right side. Twist battery ¼ turn Battery twists 30 degrees Twist either direction July 2014 Cordelia Fire District

Cordelia Fire District Clamshell Holds 9 AA batteries Twice the life of the NiCad rechargeable battery July 2014 Cordelia Fire District

Cordelia Fire District Opening A Clamshell Press dot on terminal end Case pops up and out July 2014 Cordelia Fire District

Cordelia Fire District Battery Capacity Some “older” clamshells may take 10 batteries Do not remove installed spacer. Will “Overvolt” and damage the radio July 2014 Cordelia Fire District

Top Of Radio Squelch Volume Transmit Indicator (red) Channel Select Hi/Lo or RPT/DIR Scan Priority Busy Light (green) Remember, when the toggles are toward the front, the feature is OFF, when the toggles are toward the back, the feature is ON. When programming, all features should be in the OFF position July 2014 Cordelia Fire District

Common Toggle Configuration and Labeling Left Toggle LO/HI, DIR/TA, TA or A Middle Toggle SCAN or B Right Toggle PRI or C NOTE: Toggle configuration and function can be individually configured by the agency. Some CAL Fire GPH Command Radios may be labeled Hi/Lo but the toggle function is RPT/DIR July 2014 Cordelia Fire District

Cordelia Fire District Toggle Options EPH RADIOS Generally, this toggle is programmed for HI/LO HI is 5 Watts Transmit LO is 1 Watt Transmit No DIR/RPT or TA function DIR = Direct RPT = Repeat TA = Talk Around July 2014 Cordelia Fire District

Cordelia Fire District Toggle Options GPH Radios Generally, this toggle is programmed for RPT/DIR or TA DIR or TA will disable the selected tone (Up toggle position) RPT allows the selected tone to be used (Down toggle position) Some GPH radios may have a letter “A” for this toggle July 2014 Cordelia Fire District

Cordelia Fire District Switching Groups Press “#” Enter desired group number Press “ENT” or wait five seconds Press “#” by itself to display the current group. July 2014 Cordelia Fire District

Adding Channels To A Scan List Turn off SCAN & PRI Switch to desired channel. Press “ENT” to add to channel list. Beep will sound. Display will indicate “SCN” above channel description To scan to channels in the scan list, turn the SCAN toggle up Can’t scan across groups NOTE: Channels which should be in the scan list for an incident are: Command, Tactical, Air to Ground and Air Guard July 2014 Cordelia Fire District

Deleting Channels From A Scan List Turn off SCN & PRI Turn channel selector to desired channel Press “CLR” button Channel removed from scan list July 2014 Cordelia Fire District

Cordelia Fire District Selecting A Tone Turn off SCN & PRI Press tone number on keypad. EPH Radios – The display will momentarily display a frequency name and disappear. This normal. “CG” will be displayed indicating a tone has been selected. GPH Radios – The letters CG followed with the selected tone number will be momentarily be displayed. July 2014 Cordelia Fire District

Cordelia Fire District The “#” Button Press “#” once to display the Group Press”#” again to display the channel and tone you are currently on. July 2014 Cordelia Fire District

Cordelia Fire District Priority Toggle There are several options for setting the PRI channel on either a EPH or GPH radio. As such, these settings may be agency specific. One of the more common settings is “Mode A”: With a scan list entered What ever the channel selector is turned to will become the PRI channel when the PRI toggle and the SCAN toggle are both in the UP position. You are now scanning what is in the scan list, but giving priority to any transmission received on the channel selected using the channel selector knob. If you no longer wish to use the PRI function, turn the PRI toggle down. You will still continue to scan your scan list July 2014 Cordelia Fire District

Cordelia Fire District After An Incident If your portable was cloned by the Communications Unit at the incident, have your agencies communication technician reprogram the radio with your agencies data file. This will ensure that all of the programming parameters are returned to their original settings. July 2014 Cordelia Fire District

Learn to use it before you need it! Remember LCES! July 2014 Cordelia Fire District