Date of download: 11/15/2017 Copyright © ASME. All rights reserved. From: Influence of Manufacturing Process and Alloying Element Content on the Tribomechanical Properties of Cobalt-Based Alloys J. Tribol. 2008;131(1):011601-011601-12. doi:10.1115/1.2991122 Figure Legend: Schematic illustration of the cup assembly for the rolling contact fatigue tests
Date of download: 11/15/2017 Copyright © ASME. All rights reserved. From: Influence of Manufacturing Process and Alloying Element Content on the Tribomechanical Properties of Cobalt-Based Alloys J. Tribol. 2008;131(1):011601-011601-12. doi:10.1115/1.2991122 Figure Legend: The average volume loss of cast and HIPed Stellite 6 alloys after dry sand rubber wheel tests
Date of download: 11/15/2017 Copyright © ASME. All rights reserved. From: Influence of Manufacturing Process and Alloying Element Content on the Tribomechanical Properties of Cobalt-Based Alloys J. Tribol. 2008;131(1):011601-011601-12. doi:10.1115/1.2991122 Figure Legend: The wear loss of the cast and HIPed Stellite 6 alloys after the pin-on-disk and ball-on-flat tests
Date of download: 11/15/2017 Copyright © ASME. All rights reserved. From: Influence of Manufacturing Process and Alloying Element Content on the Tribomechanical Properties of Cobalt-Based Alloys J. Tribol. 2008;131(1):011601-011601-12. doi:10.1115/1.2991122 Figure Legend: Stress cycles to failure of cast and HIPed alloys after the rolling contact fatigue tests: (a) Stellite 6 alloys and (b) Stellite 20 alloys
Date of download: 11/15/2017 Copyright © ASME. All rights reserved. From: Influence of Manufacturing Process and Alloying Element Content on the Tribomechanical Properties of Cobalt-Based Alloys J. Tribol. 2008;131(1):011601-011601-12. doi:10.1115/1.2991122 Figure Legend: The failure areas after rolling contact fatigue tests of the (a) cast Stellite 6 alloy, 2.24 GPa, and (b) HIPed Stellite 6 alloy, 2.24 GPa
Date of download: 11/15/2017 Copyright © ASME. All rights reserved. From: Influence of Manufacturing Process and Alloying Element Content on the Tribomechanical Properties of Cobalt-Based Alloys J. Tribol. 2008;131(1):011601-011601-12. doi:10.1115/1.2991122 Figure Legend: Schematic of the Hertzian stress distribution during the RCF test