Injection mold specification Client fuji Model Name Fuji-xerox Part Name Cover under l Part No. 802b086490_k001 DFM Ming L.

Integral Corrective Action List ICAL Page OPEN POINTS SOLUTIONS/ACTION WHO 1 2 3 4 Plastic Flow Analysis Waiting for confirmation. Parting _ line-1 5 Parting _ line-2 6 SLIDE 7 SLANT 8 MODIFY1 9 MODIFY2 10 MODIFY3 11 MODIFY4 12 13 14 15 I C A L Integral Corrective Action List 1-Date of opening (all dates in2005) 2-Date of beginning of action 3-Date foreseen for validation 4-Date of validation (closing) DFME Follow-up issue

Plastic Flow Analysis Side gate

Parting _ line-1 Parting-surface

Parting _ line-2 (right&left)

SLIDE

SLANT

Slide steel is too thin,suggest modify it as view A.(RIGIG&LEFT) 0.5 SLIDE Slide steel is too thin,suggest modify it as view A.(RIGIG&LEFT) (REDUCE PLASTIC) View A

The grid surface(all around) has no draft . Suggest reduce MODIFY2 The grid surface(all around) has no draft . Suggest reduce plastic 2º to release mold.

All of green surfaces have no draft.Suggest reduce plastic to MODIFY3 All of green surfaces have no draft.Suggest reduce plastic to release mold as view A. REDUCE PLASTIC VIEW A

All of red surface can’t texture because MODIFY4 All of red surface can’t texture because of it just have 1º draft on slide side.