INDUSTRIAL MACHINE TECHNOLOGY MEASURING INSTRUMENTS COMBINATION SQUARE HEAD

INDUSTRIAL MACHINE TECHNOLOGY MEASURING INSTRUMENTS COMBINATION CENTER HEAD

INDUSTRIAL MACHINE TECHNOLOGY MEASURING INSTRUMENTS COMBINATION PROTRACTOR HEAD

INDUSTRIAL MACHINE TECHNOLOGY MEASURING INSTRUMENTS MICROMETER OUTSIDE

INDUSTRIAL MACHINE TECHNOLOGY MEASURING INSTRUMENTS MICROMETER OUTSIDE

INDUSTRIAL MACHINE TECHNOLOGY MEASURING INSTRUMENTS MICROMETER DEPTH

INDUSTRIAL MACHINE TECHNOLOGY MEASURING INSTRUMENTS VERNIER CALIPHER OUTSIDE INSIDE DEPTH HEIGHT

INDUSTRIAL MACHINE TECHNOLOGY MEASURING INSTRUMENTS TELESCOPE GAGE DIAL INDICATORS

INDUSTRIAL MACHINE TECHNOLOGY LATHE PRODUCTIVITY

INDUSTRIAL MACHINE TECHNOLOGY LATHE PRODUCTIVITY BED

INDUSTRIAL MACHINE TECHNOLOGY LATHE PRODUCTIVITY HEADSTOCK ASSEMBLY

INDUSTRIAL MACHINE TECHNOLOGY LATHE PRODUCTIVITY HEADSTOCK ASSEMBLY

INDUSTRIAL MACHINE TECHNOLOGY LATHE PRODUCTIVITY TAILSTOCK ASSEMBLY

INDUSTRIAL MACHINE TECHNOLOGY LATHE PRODUCTIVITY CARRIAGE

INDUSTRIAL MACHINE TECHNOLOGY LATHE PRODUCTIVITY FEEDING AND THREADING MECHANISM

INDUSTRIAL MACHINE TECHNOLOGY LATHE PRODUCTIVITY DRILLING BORING REAMING KNURLING FILING AND POLISHING TAPER TURNING

INDUSTRIAL MACHINE TECHNOLOGY MILL PRODUCTIVITY

INDUSTRIAL MACHINE TECHNOLOGY MILL PRODUCTIVITY PARTS OF THE PLAIN MILLING MACHINE

INDUSTRIAL MACHINE TECHNOLOGY MILL PRODUCTIVITY MACHINE TABLE

INDUSTRIAL MACHINE TECHNOLOGY MILL PRODUCTIVITY MILLING CUTTERS AND CUTTER HOLDERS

INDUSTRIAL MACHINE TECHNOLOGY MILL PRODUCTIVITY CUTTING SPEEDS AND FEEDS

INDUSTRIAL MACHINE TECHNOLOGY MILL PRODUCTIVITY CUTTING SPEEDS AND FEEDS

INDUSTRIAL MACHINE TECHNOLOGY MILL PRODUCTIVITY WORK-HOLDING DEVICES

INDUSTRIAL MACHINE TECHNOLOGY MILL PRODUCTIVITY FACE MILLING SIDE MILLING STRADDLE MILLING MILLING A SLOT OR KEYWAY

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY ARC WELDING ARC WELDING IS A PROCESS THAT USES THE HEAT OF AN ELECTRIC ARC TO JOIN TWO PIECES OF METAL BY FUSION AND ADDITION METAL SUPPLIED BY THE “STICK”, THE CONSUMABLE ELECTRODE.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY ARC WELDING

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY ARC WELDING ARC WELDING IS OFTEN CALLED “STICK WELDING” FOR THE CONSUMABLE ELECTRODE WHICH IS COVERED IN SOLID FLUX AROUND THE METAL STICK.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY ARC WELDING

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY SOLDERING USES A FILLER METAL, SOLDER, USUALLY A TIN-LEAD ALLOY. IT ALLOWS TWO METALS TO BE JOINED WITHOUT HEATING THE METALS TO THEIR MELTING POINTS. IT CAN BE USED TO JOIN COPPER, ZINC, IRON, NICKEL, LEAD AND TIN AT A TEMPERATURE LESS THAN 800º F.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY SOLDER

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY SOLDER

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY SOLDERING USES A HEATED IRON MADE OF COPPER OR A SOLDERING GUN BOTH OF WHICH HEAT THE METALS AND MELT THE SOLDER. FLUXES ARE CHEMICAL COMPOUNDS USED TO CLEAN THE METAL SURFACES DURING THE SOLDERING.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY SOLDERING

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY SOLDERING FLUX

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY BRAZING USES A NONFERROUS METAL FILLER THAT MELTS ABOVE 800º F WHILE THE TWO METALS TO BE JOINED ARE HEATED ABOVE THAT TEMPERATURE. THE FILLER METAL IS DRAWN INTO THE JOINT BY CAPILLARY ACTION.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY BRAZING USES THE OXYGEN ACETYLENE TORCH TO HEAT THE METALS TO BE JOINED.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY AN ACID FLUX IS OFTEN USED TO CLEAN THE METAL FOR THE CAPILLARY ACTION TO BE ABLE TO WORK AND THE METALS JOINED.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY METAL INERT GAS OR MIG WELDING USES A SPOOL OF SOLID-STEEL WIRE FED FROM THE MACHINE THROUGH A LINER AND OUT THE MIG GUN. WHEN THE TRIGGER IS SQUEEZED, THE WIRE FEEDS OUT AND THE ELECTRIC CURRENT MELTS THE WIRE AND THE METALS BEING JOINED.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY METAL INERT GAS OR MIG WELDING USES A SPOOL OF SOLID-STEEL WIRE FED FROM THE MACHINE THROUGH A LINER AND OUT THE MIG GUN.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY THE MIG GUN PROVIDES THE INERT GAS WHICH PROVIDES THE PROTECTIVE ATMOSPHERE FOR THE WELDING. THE ELECTRIC CURRENT MELTS THE WIRE AND THE METALS BEING JOINED IN A VERY CLEAN ATMOSPHERE.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY TUNGSTEN INERT GAS OR TIG WELDING USES A PERMANENT NON-MELTING ELECTRODE MADE OF TUNGSTEN.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY THE ARGON GAS FROM THE MACHINE THROUGH THE LINER AND OUT THE TIG GUN TO FORM A PROTECTIVE ATMOSPHERE WITH THE INERT GAS.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY THE ELECTRIC CURRENT MELTS THE FILLER ROD AND THE METALS WHILE BEING JOINED IN A VERY CLEAN ATMOSPHERE.

INDUSTRIAL MACHINE TECHNOLOGY WELDING TECHNOLOGY TUNGSTEN INERT GAS OR TIG WELDING USES A PERMANENT NON-MELTING ELECTRODE MADE OF TUNGSTEN.