OpticStudio Demonstration Host: Kristen Norton Zemax, LLC © 2017
Topics we’ll cover today Introduction Set up microscope sample file Analyze performance Optimize for smallest spot size Lockdown design Tolerancing example Convert to non-sequential mode Zemax, LLC © 2017
Thanks for joining me – I’m Kristen Norton OpticStudio Product Manager Introduction Thanks for joining me – I’m Kristen Norton OpticStudio Product Manager Previously Sr Optical Engineer at Zemax Before that, Laser & Optics Engineer Physics & Applied Physics degrees Zemax, LLC © 2017
Object distance to first lens must be 170 mm Requirements Object distance to first lens must be 170 mm Object is 16 mm in diameter Use with visible light = F, d, C lines With diameter margin = 0.254 mm (0.01 in) Design for magnification = -0.02 Zemax, LLC © 2017
Summary Started with a microscope sample file Analyzed initial performance Spot Diagram, Ray Fan, Siedel Diagram Image Simulation, Grid Distortion Optimize for smallest spot size Quick Focus, Slider, Visual Optimizer, Optimization Wizard Local automatic optimization, Hammer optimizer Tolerancing Design Lockdown Inverse sensitivity, Monte Carlo simulation Converted to non-sequential Zemax, LLC © 2017
Thank you for attending! Question & Answer Thank you for attending! Questions can be submitted via the GoToWebinar control panel If your questions don’t get answered, please email us at support@zemax.com Zemax, LLC © 2017