Johnson & Pace Incorporated TAMU Facility Management Working Group Presents Statement of Qualifications (SOQ) for TAMU Facility Management Working Group ID/IQ Professional Architecture and Engineering Services SMALL PROJECTS FOR THE TEXAS A&M UNIVERSITY SYSTEM

ORGANIZATION CHART Johnson & Pace’s guiding principle is to create a team that provides the highest quality of professional expertise ensuring TAMU’s success! Our team has the knowledge to check design deliverables for completeness and adherence according to the university’s needs.

Johnson & Pace Incorporated Profile Services: We provide multidisciplinary solutions for engineering, architectural, and surveying needs. Date of Incorporation: Johnson & Pace was founded in January 1995, and Incorporated in 1998. Professional # and Type with Certifications: 17 engineers, (17 PE, 1 SE, 2 LEED AP, 1 CFM, 1 CPESC); 2 surveyors (2 RPLS); 1 Architect (AIA) 80+ Employees Location: 1201 NW Loop 281, Suite 100 Longview, TX 75605 Ph: 903.753.0663 Fax: 903.753.8803

College Station Office Profile Established: March 2014 Location: 111 University Drive East, Suite 215 College Station, TX 77840 Ph: 979.485.2844 Fx: 979.458.2845 5 Employees

College Station Office Profile Continued… Education BS, Civil Engineering, Texas A&M University, 2004 Professional Registrations Professional Engineer (PE) in TX 103414 Experience 10 years, total 5 years, City of College Station 3 years, United States Navy Associations Bryan-College Station Chamber of Commerce   Office Manager: Philip Bargas, PE Mr. Philip Bargas has 10 years of engineering experience serving as a project manager and engineer for both public and private entities in Texas. His experience includes public and private roadway design, public and private utility design, storm water design, water quality and detention design, and construction administration. Managed contingency construction projects in Afghanistan with his US Navy battalion in support of Operation Enduring Freedom.

College Station Office Profile Continued… Daniel Beamon, PE Education BS, Civil Engineering, Texas A&M University, 2004 Professional Registrations Professional Engineer (PE) in TX Experience 10 years, total 1 year construction experience 3 years, City of College Station 1 year, Johnson & Pace Skills AutoCAD Civil 3D Hydraflow Storm Sewers Hydraflow Hydrographs XP Storm Hard Dollar Project Manager: Daniel Beamon, PE Mr. Daniel Beamon has 10 years of engineering experience serving as engineer and project manager for public and private entities in Texas. His extensive experience includes specialties in site planning, grading, utility design, storm water design, roadway design, and construction administration. Mr. Beamon has served the public by working for the City of College Station as a Project Manager for capital projects, where he managed various road, sidewalk, water/wastewater, and transportation projects.

TAMU Completed Project Project name: Texas A&M University Institute for Genomic Medicine (TIGM) Procedure Room 1517 (College Station, Texas) Description: Converted the existing 228 SF Holding Room 1517 in to a procedure room by adding water, sewer, electrical, communication and HVAC (MEP) facilities. Renovation, under construction August 2015 228 SF October 15, 2014 - December 14, 2014, 6 week delay due to jurisdictional research by client Johnson & Pace Incorporated provided Mechanical, Electrical, and Plumbing Services - JPI will provide construction drawings to upgrade utilities to serve the proposed procedure room. The proposed upgrades will serve the facilities shown on the diagram provided by SSC to JPI titled, TIGM Muneoka floor plan diagram.

TAMU Completed Project Cont. The MEP facilities included a sink and associated water and sewer connections. Additionally, the communication facilities included coordinating with TAMU CIS department to determine scope, locations, and construction methods to add internet outlets. Dimensions, material, and layout areas were coordinated based on direction of SSC- Construction Cost Estimate, Bidding/Negotiation, assist during construction: Other construction phase services included review of material submittals and substitutions, review and submittal of contractor’s application for pay, preparation of Letter of Final Completion, and preparation of “As-Built” drawings based on plans marked-up by the contractor.

UHCL Project Project name: University of Houston – Clear Lake Police Building Site Work Houston, Texas Description: Site design for 63,000 SF of parking lot, driveway, and sidewalks; approximately 30,000 SF of earthwork; associated dry and wet utilities. Under construction January 2015 July 28, 2014 - December 3, 2014, 6 week delay due to jurisdictional research by client Johnson & Pace Incorporated is the prime firm, general civil engineering

UHCL Project Cont. Updated Design

JW Operating – Northeast Texas Regional Offices Description: Tasked by the Client to program architectural space requirements to consolidate various local divisions into a single Regional Office, JPI developed plans to integrate the new offices into an existing abandoned FFA building at the East Texas Regional Airport. The 28,000 square foot program necessitated efficient use of the existing 22,000 square foot facility and construction of a 6,100 Square foot addition. From Feasibility study and Space Programming to final design, bidding and Contract Administration, JPI provided full architectural and engineering services for the project including interior design, color selection and furnishings consultation.

JW Operating – Northeast Texas Regional Offices Pictures

JW Operating – Northeast Texas Regional Offices Program document, schematic layout showing work stations, and construction floor plan for JW operating.

JW Operating – Northeast Texas Regional Offices Sheet A1.7 Floor Plan

JW Operating – Northeast Texas Regional Offices Schematic Floor Plan

JW Operating – Northeast Texas Regional Offices Space Program Pages 1 & 2

JW Operating – Northeast Texas Regional Offices Space Program Page 3

Mechanical Engineering Services Johnson & Pace MEP engineers provide mechanical, electrical, and plumbing design services that comply with established design codes and technical guidelines. Using Autodesk Revit, our engineers use building information modeling (BIM) to keep facility design a collaborative, integrated process with architects and other designers.

Mechanical Engineering Services Cont. MEP services include the following: Heating, Ventilating, and Air Conditioning (HVAC) systems Exhaust systems Direct digital control (DDC) systems Piped heating and cooling water generation and distribution systems Domestic cold and hot water systems Domestic waste and vent systems Domestic hot water heating systems Natural gas piping systems Roof drain and piping systems Performance specification of automatic sprinkler systems Medical gas systems

Thank You For Your Business!