LED - Why Such Interest? Compact light source Robust Reliable performance Long life LED and Driver from OSRAM With the first generation of thin-film LED… …in 2001 OSRAM pioneered thin-film technology. This technology – which makes almost all the light generated in the chip available for use – has given rise to such innovative products as OSTAR® Projection. The new high-flux LED from OSRAM are powerful enough to be used in mini projectors 6

What is an LED ? A light emitting diode (LED) is a solid state electronic component An LED produces light by injection luminescence Individual LED’s are referred to as discrete Discrete LED’s are mounted on a printed circuit board PCB for use LED assemblies for lighting are referred to as LED modules

LED die developments

What are the advantages of LEDs? Safe low voltage operation A single LED will operate on no more than 3.5V OSRAM LED modules operate at either 10 or 24V Design cost reductions Fit and forget installation Relaxation of localised heating considerations Certain safety systems are not required Cost effective solution Offers new possibilities Compact luminaires More flexible solutions Full colour mixing possible

The real life Representative lifetime figures based on specific operating conditions InGaAlP (Indium Gallium Aluminium Phosphide) Red 150,000hrs Orange 250,000hrs Yellow 125,000hrs InGaN (Indium Gallium Nitride) Blue/White 50,000 – 60,000hrs (with silicone resin) Green 50,000 – 60,000hrs

The wavelengths

A linear solution LINEARlight® module – LM01A The LINEARlight® module is a basic, solid board module Supplied in strips: 448mm x 10mm x 5mm containing 32 LEDs = 71 LEDs / metre PCB can be broken down into sub units 56mm x 10mm with 4 LEDs Power consumption: 3.2 to 4 Watts / module = 7.1 to 8.9 Watts / metre Additional lenses can be added

Signage solutions BACKlight® – LM03A Supplied as a chain of 8 cable connected PCBs 30mm x 30mm x 5mm each containing 4 LEDs PCBs can be separated by cutting the wire links The PCBs can be arranged in 3D shapes if required Power consumption 3.2 to 4W per complete module Depending on spacing between PCBs module length = 240 to 555mm Ideal for signage

More power for your signs BACKlight Generation 2 A roll has two LED chains 4.8m long 60 individual boards with two LEDs each Colours available: Super red, red, orange, yellow, green, blue & white One-time connection with the control gear reduces installation costs A special coating is applied to protect against moisture and condensation Chain separation gives enhanced flexibility Optimised for use with OPTOTRONIC® Ideal for installation in narrow lettering

You want more? BACKLIGHT Generation 4 A roll has two LED chains 2.4m long 30 individual boards with four LEDs each One time connection with control gear reduces installation costs A special coating is applied to protect against moisture and condensation Chain separation gives enhanced flexibility Available in red, green, blue and white Optimised for use with OPTOTRONIC® Ideal for installation in large, low profile letters

OPTOTRONIC® An optimally designed control gear is necessary to operate LED-modules according to the required features OPTOTRONIC® guarantees a reliable and optimal operation of different LED-modules

MR11 ? COINlight® modules – CM01E 33mm diameter module Screw terminals for easy connection 24V operation CM01E – Vertical emitting with 9 LEDs Luminous output 0.12 to 2.15lm Power consumption 1.2 to 1.5 Watts Ideal for effect lighting

An architectural solution EFFECTlight® The effect light module incorporates a sophisticated lens design High intensity narrow beam from an array of 10 LED’s Modules can be stacked end to end as required Height - 35 mm Power consumption - 0.95 to 1.2W Used as an extremely narrow-beam LED module for lighting effects on facades, walls, columns and arches.

Flexibility is the key LINEARlight® flex – LM10A & LM11A Flexible version of LINEARlight® Vertical (LM10A) or side emitting (LM11A) versions Supplied on rolls 8.4m (vertical) and 4.2m (side) long Self adhesive backing (3M VHB) Minimum bend radius 20mm May be bent at 90º (between components) once only to fit into corners Can be cut with scissors!

LINEARlight with Dragon performance LINEARlight POWER Flex LINEARlight Flex POWER Flex DRAGONtape® Lumen / LED 2,5 12 25 Lumen / m 179 500 1000 Length [mm] 8400 2800 150 Power [W] 86,3 72 8,4 Ideal for cove lighting and handrail illumination

OPTOTRONIC® An optimally designed control gear is necessary to operate LED-modules according to the required features OPTOTRONIC® guarantees a reliable and optimal operation of different LED-modules

A colourful solution LINEARlight Colormix Dynamic color change All LED change color on one LED package and at the same time Smallest useable unit 10 LED’s Module width: 11.5 mm Module length flexible version: 4 m Module length rigid version: 450 mm

A colourful solution LM01M-RGB module 450 x 12 x 3.5mm: contains 20 LEDs (50 LEDs / metre) Divisible into 150mm sections 17 Watts per metre maximum power consumption 160 lumens per metre luminous output 24 Volt operation Only four connections: Simple interface to dimmers / controllers using OSRAM control gear 'One stop' colour mix solution

And it’s flexible LINEARlight Colormix Flex– LM10L The LED module for dynamic colour applications (RGB) on a flexible pc board material Dimensions of overall module (L x W x H): 4000 mm x 11.5 mm x 2.2 mm Smallest unit possible: 10 LED’s Fully dimmable Optimal design for OPTOTRONIC® Modules Adhesive tape Cutting possible, Connection of several parts: Soldering

A new generation LINEARlight Colormix Flex Generation 2 Increased lifetime Increased colour range Higher efficiency Twice as bright for the same power

Wallwashing / Effectlighting Colour control OT-RGB 3 Channel DIM: each colour separately controllable via 1..10V interface. RGB-Sequencer: preprogrammed sequence, speed variable via 1..10V interface. OT DALI 25/220-240/24 RGB: DALI controllable device sequences can be reprogrammed Wallwashing / Effectlighting

It is easy ! OT EASY 60/220-240/24 RGB Power supply dimmer LED module Mains Power supply + _ + – R – G – B dimmer LED module 240V ~ control

It is easy ! Configurable with EASY Light Management System IR sensor (EASY IR, EASY IR CI) Standard push-button Mains IR remote control (EASY RMC) + W B G R - LED module 240V ~

System enhancement EASY Light Management System maximum system length with LINEARlight Colormix Flex up to 64m @ 960 W LED module 240V ~ MASTER Up to 16 x OT EASY 60 Y-connector Mains SLAVE 1 SLAVE 2 Standard push-button + W B G R - LED Module

The possibilities are endless 1 x DALI Easy supports 5x300W packages Up to 100m of Colormix Master slave function allows DALI EASY to control up to 16 packages L N DALI EASY 24kW Light package 1.6km LINEARlight Colormix Flex

High flux devices DRAGONtape® and DRAGONpuck®                                                     6xLEDs on self-adhesive tape, which can be separated into single units 3xLED‘s in 35mm diameter Easy separation by cutting after each LED sub unit Connection in series Electrical connection by soldering of wires Optics with different reflected beam angles are available as accessories Ideal for inground mounted luminaires Emergency / rescue signs Backlighting of diffusing glass and plastics

With optics ? DRAGONtape® Optics Additional Optics for beamangles:10°, 30° and 14°x 22° Easy mounting with an M2 screw Precise positioning of special Osram lens holder Dimensions optimized for application with DRAGONtape® 14°x22° 30° 10°                                                                                   DRAGONtape®

A modular approach 1. 2. 3. LINEARlight-DRAGON Linear High Power LED-Module with 6 LED GoldenDRAGON® Superior lumen performance Available in white and other LED colors Plug and Play System with feeder an connector Easy assembly with brackets Modular system with highly integrated: 1. Lensholder + Lens 2. GoldenDRAGON® on metal core board 3. Heat sink (cooler) All the parts are also available seperately 3. 2. 1.

The real deal COINlight-OSTAR Circular High Power LED-Spot with 1 OSTAR® Beamangle: 38° Operation on 24V DC OPTOTRONIC® Integrated primary heatsink Easy connection with integrated leads 4 modules per OT75 In-ground mounted luminaires, wall washing, cove lighting, direct illumination

System Guarantee 3 year SYSTEM Guarantee Use of OPTOTRONIC units with OSRAM Modules OSRAM peace of mind for your customer 3