Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: (a) Heat pipe grinding wheel structure: 1—cover plate, 2—wheel component, 3—seal joint, 4—plug, and 5—rubber ring, and (b) manufactured heat pipe grinding wheel

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Heat transfer principle of heat pipe grinding wheel

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Experimental system (a): 1—adjustable spot cooler system, 2—supporting frame, 3—test wheel, 4—brush, 5—induction coil, 6—collector ring, 7—filter amplifier, and 8—data acquisition card, and temperature measuring points of test wheel (b)

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Temperature calibration curve of the thermocouple

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Thermal signal of Po,e measured in stationary state

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Comparison between results of test wheel with heat pipe and the one without heat pipe on measured thermal signals of each thermocouple: ((a) and (d)) Po,e, ((b) and (e)) Pi,e, and ((c) and (f)) Pi,c

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Temperatures of Po,e, Pi,e, and Pi,c under different heat flux inputs and cooling conditions

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Temperatures of Po,e, Pi,e, and Pi,c under different wheel speeds

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Temperatures of Po,e, Pi,e, and Pi,c under different liquid film thicknesses at the evaporator

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Thermocouple configuration for surface grinding

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Measured signals in dry grinding with two different wheels: (a) grinding wheel without heat pipe and (b) heat pipe grinding wheel

Date of download: 12/21/2017 Copyright © ASME. All rights reserved. From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding J. Manuf. Sci. Eng. 2016;138(11):111009-111009-8. doi:10.1115/1.4033445 Figure Legend: Effects of two different wheels on grinding temperatures in dry grinding