Controller Rework

STEP 2. Remove screws STEP 1. Remove cover from controller Carefully remove cover from controller as to not damage locking tabs. Remove cover STEP 2. Remove screws Use a screw drivers to remove the first four screws from unit. Remove screws Bergstrom, Inc. Confidential

STEP 4. unsolder connector STEP 3. Remove screws Use a screw drivers to remove the remaining first four screws from unit. Remove screws STEP 4. unsolder connector Unsolder connector that is mounted to the board. Unsolder pins Remove connector Bergstrom, Inc. Confidential

STEP 6. Assemble back cover STEP 5. solder wires Solder 8inches of 20 AWG wires onto board. STEP 6. Assemble back cover Route wires through back cover and assembler with screws. STEP 7. Assemble connector Assemble wire into connectors securely. Bergstrom, Inc. Confidential

STEP 8. Final Assembly Bergstrom, Inc. Confidential Assemble unit together for desired outcome. Bergstrom, Inc. Confidential