Chemistry 301 Q2 Tu/Th November 21, 2017: Agenda Happy Thanksgiving to you and your loved ones! Be safe! Lecture: 1) Early synthesis reflections , 2) TLC/Flash/Hi-Vac, 3) More Med Chem Lab: Keep rocking ; Rob will talk about each group’s proposed syntheses; put heads together on Et picc + CH3CN reaction Next time: No Class on Thursday due to Thanksgiving Holiday Homework: Keep thinking about multi-tasking, be sure to tell Rob if you need chemical x/y/z, let Rob know if he can help run any reaction! NB Rob at orthodontist for daughter tomorrow morning, apiary tomorrow afternoon – call if you need me Will discuss in detail Case Study after Break

Early Reflections on Synthesis Work Cooling baths: level of cooling medium, foil to prevent evaporation, CO2 chunks vs. ice Secondary containers for reactions: a great back-up Stopping reactions: When? How? Why? Addition of chemicals: speed, dependence on volume/method used to add – application to solids and liquids Opening any chemical outside of hood

TLC TLC stains: What the heck are they? Why are they used? How do you choose the/a good one to use? See Moodle under tips/tricks and today’s entry for nice lists of recipes and corresponding typical functional groups a given stain picks up! (We provide several (KMnO4, PMA, ninhydrin), but we may be able to make additional stains if you need)

TLC Super quick review: Does this ring any bells? Hopefully it doesn’t stir up any nightmares! Downloaded on 9/19/17 from: http://www.napavalley.edu/people/sfawl/Documents/Chem%20240/Alkene%20Oxidations%20using%20KMnO4.pdf

TLC TLC stains: Why do they work? Remember talking about the reactivity of double bonds back in Chem 225? For example, KMnO4 (K+1/Mn+7/O4-8) dip plus heating! Permanganate ion (MnO4-) is deep purple! Reduction of Mn+7 to Mn+4 to give MnO2 gives a red/orange/brown color on the plate where you have a compound with “reactable” double bonds! See umber! Downloaded on 9/19/17 from: http://www.thesynapticleap.org/userfiles/DSC08904a(1).jpg

Hi-Vac Hi-Vac: What do you need to do? Why? How? Ask one of our wonderful TAs to help Another hint: the “CDCl3 trick”. What’s that? How might it apply to a first step “F” reaction involving malononitrile?

Flash Chromatography Rob’s way: Cotton, dry pack with silica, elute with mobile phase using pressure regulator, keep same rate for next time Dry transfer of crude product with powder funnel Sand Isocratic vs. gradient Serpentine collection of 10 x n fractions Rinse tip with EtOAc (e.g.); rinse “spotter” Check TLC as you go by 5s, then elute all fractions of interest

Fundamental Med Chem topics -- Continued

Solubility Influenced by hydrophilicity/hydrophobicity of the molecule! Too polar (orally administered) prevents passage across cell membranes in gut wall Too greasy (orally administered) won’t be absorbed well in gut but rather dissolved in fat globules in gut We measure the hydrophobic nature of a drug with the partition coefficient (P), which measures relative distribution of a drug in n-octanol/water Hi P value indicates a relatively more hydrophobic compound; log P values are used typically to measure hydrophobicity

Solubility/Numerical Representations Examples of molecules with low and high log P values Remember, we try to avoid very hydrophilic and very hydrophobic compounds for oral administration Do these values make sense?

Solubility – Varying N-alkyl substituents to vary pKa We may need to alter the structure of a drug with a pKa outside the range of 6-9. Why? We can add a) extra N-alkyl groups or b) larger N-alkyl groups to increase basicity BUT! What is the potential problem there? What additional “trick” can you see to the right in “PRO 3112”? - High or low pKa tends to lead to greater ionization and more difficulty of absorption of compound through cell walls Amidine is more basic than PRO 3112 as 3112 “wraps up” the basicity without a loss of activity Adding N-R groups increases electron-donating effect to increase basicity but more bulky groups prevents interaction with water

Solubility – how can we change it? To make a molecule less polar, we can “mask” polar groups by, e.g., converting an alcohol or phenol to an ether or ester; a carboxylic acid to an ester or amide; 1˚ or 2 ˚ amines can be converted to amides or 2˚ or 3˚ amines. Be careful, though! To make a molecule more polar, we can add polar groups! Next time… A bit more on solubility, on to metabolism

Solubility – Changing by varying hydrophobic substituents … we can: Increase hydrophobicity by a) adding alkyl groups in the carbon skeleton or b) increasing the size of existing alkyl groups Decrease hydrophobicity by a) decreasing the size of existing alkyl groups or b) removing them Increase the size of one existing alkyl group and decrease another Add –F or –Cl (rarely –Br or –I) to increase hydrophobicity

Solubility – Varying aromatic substituents to vary pKa We can change the pKa of an aromatic amine or carboxylic acid by adding electron-donating or withdrawing substituents to the ring! Remember the position of such a substituent can affect a more distant group through induction and/or resonance It was found that the substitution of a –NO2 group for a –Cl group in the development of oxamniquine (right) improved activity, and a pKa change was thought to be involved. How?

Solubility – Using “bioisosteres” for polar groups Bioisosteres are functional groups that have similar chemical or physical properties but which may improve such characteristics as bioavailability, toxicity, etc. Medicinal chemists use these frequently! One example is the substitution of the tetrazole group for a carboxylic acid Both have an acidic proton and exist in ionized form at pH 7.4, but the tetrazole is 10x more lipophilic than a carboxylate anion so drug absorption is increased! Some cool acid isosteres!

Fighting chemical and enzymatic degradation – Steric shields (from Star Wars?) We talked earlier about the body’s ability to break down drugs. Is there anything we can do to prevent/decrease/eliminate this degradation? Do we want to eliminate it? As you can imagine, esters and amides are readily hydrolyzed in our gut; what if we don’t want that to happen to a drug? We can put in a bulky group – a steric shield – near the functional group to make hydrolysis more difficult! Figures are from G. Patrick’s “An Introduction to Medicinal Chemistry” 5th Ed.

Fighting chemical and enzymatic degradation – Use of bioisosteres Remember, the key to bioisosteres is that they are groups substituted for other groups that preserve biological activity but improve some other aspect of the drug We can replace the –CH3 in the ester below with an –NH2 to give a carbamate; it has the same valency around the central atom and size, BUT the electronics are different! How? Why does that matter? You might also use an amide. Such bioisosteric replacements may be specific to certain categories of drugs. You can also manipulate the electronic effects (inductive effects) of, e.g., esters to “tune” the ease of their hydrolysis

Fighting chemical and enzymatic degradation – Steric and electronic modifications teamed-up! What has been changed in the short-acting local anesthetic Procaine to produce the longer acting anesthetic Lidocaine? Is there a place for both?

Drug metabolism – How does this happen? We divide metabolism into 2 categories, Phase I and Phase II Very polar compounds/drugs are quickly excreted by the kidneys; non-polar drugs more successfully absorbed are often metabolized in the liver (it occurs to a lesser extent in the gut wall, blood plasma, and other tissues), specifically by the addition of polar groups to the molecule! The drug is then more water soluble and is then more likely to face excretion upon passage through the kidneys Phase I metabolism generally entails oxidation, reduction, and hydrolysis to provide more polar groups Phase II metabolism involves the attachment of a polar molecule to a group already on the drug or one which was introduced by Phase I metabolism; this makes the drug even more polar and more likely to face excretion

Drug metabolism – Phase I Phase I metabolism generally entails oxidation, reduction, and hydrolysis to provide more polar groups (examples to the right)

Drug metabolism – Phase II Phase II metabolism involves the attachment of a polar molecule to make it even more polar and susceptible to excretion Glucuronic acid:

Blocking metabolism – Blocking groups We talked last time about decreasing chemical and enzymatic degradation and how metabolism occurs. Let’s move on to blocking/slowing metabolism! One approach is replacing a hydrogen with a methyl group to block the introduction of a polar hydroxyl group that allows Phase II conjugate addition and elimination This approach was used with the oral contraceptive megestrol acetate Figures are from G. Patrick’s “An Introduction to Medicinal Chemistry” 5th Ed.

Blocking metabolism – Blocking groups continued Another approach to slowing metabolism involves the introduction of a fluorine atom at the para-position of an aromatic ring The compound CGP 52411 was in development as an enzyme inhibitor of EGF (epidermal growth factor – a protein that stimulates cell growth), but it was determined that it was metabolized by oxidation at the para-position. How determined? F was substituted to address! Deuterium is also thought to have potential! (C-D vs. C-H bond strength)

Blocking metabolism – Functional group substitution Many other common groups are susceptible to Phase I/II metabolism; substituting other groups for these is part of a broader strategy Methyl groups on aromatic rings can be oxidized to carboxylic acids. Aliphatic and aromatic C-hydroxylations, N- and S-oxidations, O- and S-dealkylations, and deaminations are common An example was the replacement of a methyl group by a chlorine in the antidiabetic tolbutamide to produce a longer-lasting chlorpropamide Other examples include substitution of other bioisosteres for esters, etc.

Blocking metabolism – Group shifts What if the group that makes a drug like molecule susceptible to metabolism is necessary for its interaction with a binding site in a target enzyme? We can either temporarily protect that site by making a “prodrug” or “shift” the group within the existing skeleton

Blocking metabolism – Group shifts What did we do here with the asthma drug, salbutamol? How did it help?

Blocking metabolism – Ring variation, ring substituents Aromatic rings that are susceptible to metabolism may be stabilized by adding N atoms to decrease electron density in the ring This may also decrease the susceptibility of a ring methyl group to metabolism

Enhancing metabolism! If a drug is too stable and resistant to metabolism, you may need to increase its metabolism to prevent toxicity or long lasting side effects

“Self-destruct” drugs Cromakalim is an anti-asthmatic drug that is effective when inhaled into the lungs, but it can cause cardiovascular side-effects if it is absorbed into the systemic blood supply There are ways to address this!