Hair removal system for most skin type and hair type and collagen remodeling. REV 160418 1

What is EPILIA RF ? Diode laser Radio Frequency “Synergy of Fractional Diode Laser with RF for Hair Removal”

Principle of Hair Removal of EPILIA RF RF energy concentrates on low impedance area. If the temperature is lower, impedance will be higher. So, RF energy will concentrate on higher temperature of skin area. 1st Cooling Protect Epidermis layer against the heat. Epidermis Temp. ▼, Dermis Temp. ▲ ⇒ Epidermis Impedance ▲ , Dermis impedance ▼ 2nd Collimated Fractional Laser Laser preheats the hair follicle. (Energy level is safe even for dark skin) ‘Act as a guide of RF’ Dermis Temp. ▲ ⇒ Dermis Impedance ▼ 3rd RF RF applies more heat to hair follicle. (RF is not affected by skin melanin) Dermis impedance is lower. So RF energy is concentrated.

Principle of Hair Removal of EPILIA RF 1st Cooling 2nd Fractional Laser 3rd RF RF energy is concentrated on target hair follicle area. Temperature Impedance Epidermis ▼ ▲ Dermis Temperature Impedance Dermis ▲ ▼

RF Heat distribution around the hair shaft RF selectivity Hair shaft is Non-conductive. RF currents are flowed hair shaft around. RF current density of the hair follicle is much higher than other area of the skin. No RF selectivity Also, RF currents is not affected by melanin. Therefore, RF energy is not sensitive to skin & hair color at all. Follicle (Conduct) Electrodes Distance from hair center Temperature Shaft (Non-Conduct)

EPILIA Heat Profile More Safety RF Shaft is heated by laser Follicle is heated by RF Shaft & Follicle is heated by Laser + RF Due to RF energy additionally heats the hair follicle regardless of hair color, thin or bright hair can be destroyed with relatively lower laser energy than heating the hair by single laser energy. Low laser energy application is allowed to have low influence of skin melanin for hair removal treatment. More Safety

EPILIA Skin Rejuvenation Principle RF Fractional Laser + RF Dermis stimulate Collagen, Elastin Fiber remodeling & rejuvenation Wrinkle, Skin Tightening, Pore minimize improvement Epi-dermis Dermis Subcutaneous

Dual Action Tissue Rejuvenation Heat Laser + RF Before Right After 1 month After Immediate collagen contraction Collagen remodeling and tightening over time

RF Heat Hair & Dermis Layer Shaft Follicle Melanin & Water Oxyhemoglobin 40℃ 40℃ 70℃ 60℃ Hair Removal Skin Tightening

Advantage of EPILIARF Most Skin and Hair type is available Co-operative effect by combination of Laser and RF, operating on brighter color hair or dark skin is available in safe. RF safety sensor Laser is emitted only in case the hand piece is properly contacted on the skin by RF safety sensor on the hand piece. Power cooling(2℃ ) Sapphire-tip contacting cooling keeps 2℃ and protects epidermis layer during treat time for patient comfort. Fast treatment FDP mode( fast delivery pulse) supports up to 10Hz repetition rate and DP1 mode supports up to 3Hz and fast treatment can be achieved. Accuracy and efficiency Collimating lenses uniformly radiate direct laser. Energy loss by scattering is minimized and heat the hair . No additional cost There is no consumable parts in Epilia RF and we do not need maintenance cost.

Specification Laser Wave length 808nm Cooling 2℃ (Contact) Laser Fluence MAX 60J/㎠ Skin Impedance Control By contact RF Energy MAX. 150 J/㎤ Platform Size 320 x 460 x 860mm Treatment Area 12 X 11mm Weight 48kg Repetition FDP (Laser) : Max. 10Hz, DP (Laser+RF) : Max.3Hz Electrical Requirements Standard 100V ~ 240V

THANK YOU!

VIKINI & EPILIA RF √ 600W level high power with collimated lens. √ Specialized Mode(DP2) for thin and bright Hair √ Ideal Spot Size (12x11mm) – full size cooling √ Professional hair removal

VIKINI & EPILIA RF √ 600W level high power with collimated lens. √ Specialized Mode(DP2) for thin and bright Hair √ Ideal Spot Size (12x11mm) – full size cooling √ Professional hair removal √ 320W diode laser plus Radio Frequency √ Safe Mode(DP1) for darker skin with RF √ Ideal Spot Size (12x11mm) √ Skin rejuvenation is available