DIGITAL DATA 4CH MUX SERIES PRODUCT SPECIFICATION EL – 4D1202 WA / WB LINK DATA 4 FCC DESCRIPTION The ELIM EL-4D1202 WA / WB series data transceiver supports simultaneous 4 channels of digital data transmission over a single-mode optical fiber. It is suitable for long haul transmission application without any noise or electromagnetic interference. The modules are universally compatible with Major CCTV control data and support RS-232, RS-422 and 2-wire or 4-wire RS-485data interfaces, as well as Sensormatic Sensornet™ and all major data protocols. Plug-and-play design ensures ease of installation requiring no Electrical or optical adjustments. Each Transceiver incorporates status indicating LED’s for monitoring of proper System operation. APPLICATION .CCTV, ITV and traffic control System .CATV System .Security System .Process control and monitoring System FEATURES . Supports RS-232, RS-422 or RS-485 ( 2 –wire or 4-wire ) Data Interfaces . Plug-and-Play Installation ( Adjustment-Free ) . LED Status Indicators For Monitoring system status . Hot-Swappable Rack Modules . Automatic re-settable Fuses . Free voltage Power Input . Transmission distances up to 190Km . Registration of EMI/EMC, K-Mark, INNO-BIZ, Good Software and Venture Business ORDERING INFORMATION PART NUMBER DESCRIPTION OPTICAL PWR BUDGET MAX DISTANCE EL – 4D1202 WA 4ch Data Transceiver / Receiver EL – 4D1202 WB 4ch Data  Transceiver/ Receiver 7dB 20Km SINGLE-MODE 9/125um EL – 4D1402 WA 4ch Data Transceiver / Receiver EL – 4D1402 WB 4ch Data  Transceiver/ Receiver 13dB 40Km EL – 4D1602 WA 4ch Data Transceiver / Receiver EL – 4D1602 WB 4ch Data  Transceiver/ Receiver 20dB 60Km

DIGITAL DATA 4CH MUX SERIES EL – 4D1202 WA / WB LINK DATA Data Interface: RS-232,RS-422, RS-485 with Tri-State Data Format: NRZ,RZI,Manchester, Bi-phase Data Rate: DC – 2Mbps(NRZ) Bit Error Rate: < 1 in 10 E-9 Operating Mode: Simplex or Full-Duplex WAVELENGTH 1310/1550nm OPTICAL EMITTER Laser Diode NUMBER OF FIBER 1Core LED INDICATORS -. Data Transceiver .RX, TX Data LED .Power LED SPECIFICATIONS CONNECTORS Data: Terminal Block with Screw Clamps, Type DB-9 Connector (RJ-45) Optical: ST or SC Connector ELECTRICAL & MECHANICAL Power: 12 VDC @ 1.2A Surface Mount: From Rack Number of Rack Slots: 12 Power Consumption : 1 card ( 0.35A) Current Protection: Automatic Resettable Solid-State Current limiters Size( WxHxD ) Module Type 123 x 35 x 220mm 3u Card Type 48 x 128 x 224mm 1u Rack Mount 483 x 44 x 330mm 3u Rack Mount 483 x 132 x 275mm ENVIRONMENTAL MTBF: > 100,000 hours Operating Temp: -40℃ to +74℃ Storage Temp: -40℃ to +85℃ Relative Humidity: 0% to 95% (non-condensing) SYSTEM DESIGN PC 1 PC 1 Control Data Control Data 1core SM PC 4 PC 4 ELIM Co., Ltd A-dong 3f Elim B/D 50, Saneop-ro 155beon-gil Gwonseon-gu, Suwon-Si, Gyeonggi-do, 441-811 Korea http:/www.elimopt.co,kr