Redesigned RTC/RTS Fiber Enclosures

The Old RTC Family Pros Cons Rugged construction Easy to use Simple design Cons Antiquated look Plastic clip latches Lack of cable management

Design Effort We started over Hired a design consultant Brought in our sales team Questioned select customers Created proto-types Developed better packaging

New Part Numbers No longer based upon port count Ex: RTC18 port count – 18, 24, 36, or 72 Based upon rack space & adapter plate count RTC18  RTC1U-3AP (Saves 1 RU) RTC36  RTC2U-6AP RTC72  RTC4U-12AP RTC144  No equal

New Part Numbers RTS (sliding tray) True family look for all RTC1U-3AP - RTS1U-3AP RTC2U-6AP - RTS2U-6AP RTC4U-12AP - RTS4U-12AP

The New HD Adapter Plate New enclosures will accept standard 600 series adapter plates New HD adapter plates Increase port density 600 series fits 3 in 1RU Dual LC = 36 ports HD series fits 4 in 1RU Dual LC = 48 ports Part numbers will be similar but add HD 616SC  616SCHD

The New RTC/RTS HD adapter plate only fit in an RTCxx-HD RTC1U-HD4AP HD only fits with HD

The New RTC/RTS New Features Front Door Molded front door Slam latches Opens 180 degrees Aesthetically pleasing Showcases OCC brand

The New RTC/RTS New Features Top Panel Slides out like old panel Integrated pocket for label holder to meet 606A standards

The New RTC/RTS New Features – Adapter Plate Bulkhead No barrier between adapter plate openings Allows for movement of adapter plates without disconnecting fiber

The New RTC/RTS New Features New fiber hoops Retention teeth isolate cable Provides for cable segregation Don’t have to remove for splice trays Stackable 1RU comes with (2) small hoops; 2RU comes with (2) large hoops and 4RU comes with (4) large hoops

The New RTC/RTS New Features Cable tie down locations Multiple bridge lances incorporated to facilitate cable routing

The New RTC/RTS New Features - Cable Entry Exterior cable support Provides cable support at cable entry Accommodates Velcro or cable ties Can be mounted at any cable port

The New RTC/RTS New Features - Cable Entry Revised gasket No cutting required Remains in place when pulling cable

The New RTC/RTS Key Points New aesthetically pleasing design that maintains OCC’s reputation for rugged design New design promotes the similarities between the RTC and RTS footprint New HD Adapter plates enable high density configurations Installer friendly design for easier installations

The New RTC/RTS Schedule Introduction at BICSI Winter Conference February 3rd – 6th Take Orders Beginning February 1st In Stock March 1st

The New RTC/RTS Sales support New RTC brochure Fiber Optic Solutions brochure Videos Features & Benefits of RTC Fiber Optic Solutions Installation (coming soon) Samples Available late February

Questions?