Inkist™ the Automatic Refill Devices Ink refill specialist Inkist™ the Automatic Refill Devices INKIST/itwo Inc.

Product Introduction INKIST - The World first Automated Ink refilling kit is a patented product can refill without needle, syringe, electricity has classy design saves costs and environment supports major ink printers including HP, EPSON, CANON, LEXMARK, BROTHER and SAMSUNG

How to use - Video www.inkists.com

Advantages Economic performance Easy to use Classy Design 80% cost save than the original brand Easy to use Automatic refill Classy Design Eco-friendly product

Procedure 1 – Cleaning for start Open the kit as the picture above illustrated. Make sure the switch turned “OFF” Cleaning procedure If the nozzle of cartridge is not clean, drop some cleaning fluid on the nozzle, and wait for 10 seconds, then clean with a cleaning stick enclosed.

Procedure 2 – cartridge Install [Pressure inside of the kit refills ink automatically] Stick the kit with fingers like picture①, and install cartridge to the kit like picture②. Place the cartridge(30 °) to the edge of rubber, and push the cartridge towards the back of the product until it clicks into place. Please make sure the cartridge is installed correctly. Unless it is installed correctly, the ink could be leaking

Procedure 3 – Install Ink Push the safety pin and remove it Install Ink pack Insert an ink pack into the back holder and push it down until it sounds “click” and push the safety pin and remove it. Wait for 15 minutes Turn the switch “ON” and wait for 15 minutes. [HP, SAMSUNG, CANON, LEXMARK]

Procedure 4 – Refill and Clean Turn the switch “OFF” after 15 minutes. Clean nozzle and the kit with the cleaning stick. Put the refilled cartridge into the printer, and print. Keep the ink pack on the kit till next refilling time in order to keep the kit clean.

Contents in a Kit Inkist™ Body Inkist™ Packs(2EA) Cleaning Kits 2 Ink Packs Cleaning Kits

Q A &