The mission of YY-W2xx Server Chassis Quick view at products spec. The mission of YY-W2xx Server Chassis Versatile High reliable rackmount Pedestal server chassis It is very flexible, could be rack mounted, could be stand alone, single or redundant power supplies, and supports hard drives hot swappable in built in special design backplane or in modules. Either IDE hard drives or 1" Ultra160 SCSI hard drives. This chassis enables you to meet a variety of customer needs with one chassis. Application Power User Workstation Small and Medium Business Pedestal Server

Multi-function chassis, Pedestal (YY-W2xx) and Rackmount(YY-R5xx) Case dimension 220mm W x 600mm D x 427mm H Motherboard configuration extended ATX, ATX , Micro ATX Drive configuration (3-combination) 8 * 5.25" exposed + 2*3.5” hidden or 5 * 5.25” exposed + 7*3.5" hidden System cooling fan Built-in 12 cm Ball-bearing fan + 2*6cm rear-mounted Front panel control Power switch , Reset switch, USB*2 Front panel LED Power, HDD, Fan Alarm , HDD Failure LED , Lan*2, USBx4(Optional) Materials Metal:Recyclable SECC metal Plastic :UL approved flame retardant parts Steel chassis t0.8~1.2mm R501 W201 W202 Emissions Designed to meet FCC class B-47CFR part 15 /IEC/CISPR 22 Net Weight 14.0kg without PSU Color Cool gray, Black Power Supply EPS12V, ATX12V SINGLE OR REDUNDANT P’SU

YY-W201 Server Chassis, Pedestal & 5U rackmount versatile Single ATX/EPS12V or Redundant P’su Flexible and easy install drive bays. Type A: 8x5.25” exposed Type B: 5x5.25”exposed+ 5x3.5” HDD hidden Type C: 4x5.25”exposed+ 6x3.5” HDD hot swappable w/backplane Built in 1x12cm DC fan for hard drives and core areas Optional 2x6cm DC fan for AGP/PCI cards Optional card clamp holder for fixing add-on card Allow EEB3.5 M/B (12”x13”) CEB1.1 M/B (12”x10.5”) Optional Intrusion Switch

YY-W201 Server Chassis, Pedestal & 5U rackmount versatile With CONVERTIBLE DRIVE BAYS, 3 BAYS OF 5.25” COULD BE ALWAYS KEPT IN HORIZONTAL VERSATILE 5.25” DRIVE BAYS, TO KEEP CD ROM IN HORIZONTAL IN RACKMOUNT USE.

YY-W201 Server Chassis, Pedestal & 5U rackmount versatile *USBx4 Front Access Snap in Front Bezel, could be fixed and locked after system installed Optional fixed HDD cage for 5-devices Open side panel with handle The vented panel should be retained as an air inlet for core area cooling Easy swap fan to HDD cage Slide in rails for drives install

YY-W201 Server Chassis, Pedestal & 5U rackmount versatile Power Supply could be Single ATX/EPS12V, or Redundant Power Supply Excellent Air Flow for hard drives and core areas Optional 6cmx2 cooling fans for AGP/PCI cards Optional Card Clamp holder for fixing Add on cards Adjustable holder for various length, height of Add on cards Optional Intrusion switch

Flexible combination driver bay Type A: 8*5.25”drive bays Free to build your own raid module or HDD enclosures Type B: 5*5.25”+5*3.5”HDD drive bays HDD frame for 5-devices HDD, with anti-vibration soft mounting kits and 9cm cooling fan Type C: 2*3 1”H hot swap module in 4x5.25” device 2 x 3-devices hot swappable HDD raid module, for IDE ATA66.100/133, SCA Ultra160/320 or SATA HDD

Flexible Combination Driver Bay YY-W201 with Raid module Hot-Swappable solution for SATA (Serial ATA), SCA2 ULTRA320, and IDE ATA133 HDD Specifications: Material: Aluminum Interface: SI-0237SS, SI-0347SS, SI-0357SSSerial ATA SI-0237C, SI-0357CSCA2 Ultra320 SI-0237A, SI-0347A, SI-0357AATA66/100/133 Hot-Swap: Level 4 (Bus may have active I/O processes on going, but device being inserted or removed must be idle) SAF-TE: HDD fail detect function optional (SI-0375CS w/SAF-TE) Alarm System: Buzzer beeping in case of fan error. (stop, disconnect, speed slow down) Feature: Front Led display: HDD full, power access, SCSI ID. SI-0237 SI-0347 SI-0357

Multiple Chassis; rackmount (5U) & Pedestal Control Panel: Power Failure LED LAN LED x2 HDD LED Power on LED Reset Switch Power Switch 427mm 600mm Dust Filter behind Front bezel 220mm EEB 3.5 compliance www.ssiforum.org CEB 1.1 compliance Compact & Scaleable Hard Tooling Production

How to make it as rackmount : EIA-310D compliance EEB 3.5 compliance , refer to www.ssiforum.org Telescopic slides (24”) is optional 2. Screw in rack bracket and handles 1. To remove top cover and bottom cover of chassis 3. Slide in to EIA rack

http://www. intel. com/support/motherboards/server/shg2/chassis_list http://www.intel.com/support/motherboards/server/shg2/chassis_list.htm

http://www.intel.com/support/motherboards/server/se7501br2/chassis_list.htm

http://www.intel.com/support/motherboards/server/se7501cw2/chassis_list.htm

http://support.intel.com/support/motherboards/server/se7500cw2/sb/CS-006857.htm

http://support.intel.com/support/motherboards/server/se7501hg2/sb/CS-007319.htm

http://support.intel.com/support/motherboards/server/se7505vb2/sb/CS-007378.htm