GENERAL MATHS – UNIT TWO Linear Programming GENERAL MATHS – UNIT TWO

Review - Sketching Linear Graphs The Gradient-Intercept Method The linear equation needs to be arranged in the form 𝒚=𝒎𝒙+𝒄 * Plot the y-intercept on the graph (0,𝑐) * Use ′𝑚′ (the gradient) to determine the next point to plot 𝑚= 𝑟𝑖𝑠𝑒 𝑟𝑢𝑛 * Join the two points together

eg1. Use the gradient-intercept method to draw the graph of 𝒚= 𝟑 𝟐 𝒙+𝟏 The Gradient-Intercept Method The linear equation needs to be arranged in the form 𝒚=𝒎𝒙+𝒄 * Plot the y-intercept on the graph (0,𝑐) * Use ′𝑚′ (the gradient) to determine the next point to plot 𝑚= 𝑟𝑖𝑠𝑒 𝑟𝑢𝑛 * Join the two points together eg1. Use the gradient-intercept method to draw the graph of 𝒚= 𝟑 𝟐 𝒙+𝟏 The y-intercept is 1, which gives point (0, 1) To sketch, we need one more point. We can find this from gradient, 𝑚= 3 2 = 𝑟𝑖𝑠𝑒 𝑟𝑢𝑛 This tells us, for every 3 points up (risen), we move across 2 points (run). (2, 4) (0, 1)

eg2. Use the gradient-intercept method to draw the graph of 𝒚=𝒙−𝟒 The Gradient-Intercept Method The linear equation needs to be arranged in the form 𝒚=𝒎𝒙+𝒄 * Plot the y-intercept on the graph (0,𝑐) * Use ′𝑚′ (the gradient) to determine the next point to plot 𝑚= 𝑟𝑖𝑠𝑒 𝑟𝑢𝑛 * Join the two points together eg2. Use the gradient-intercept method to draw the graph of 𝒚=𝒙−𝟒 The y-intercept is -4, which gives point (0, −4) To sketch, we need one more point. We can find this from gradient, 𝑚=1= 1 1 = 𝑟𝑖𝑠𝑒 𝑟𝑢𝑛 This tells us, for every 1 point up (risen), we move across 1 point (run). (1, -3) (0, -4)

The y-intercept is -1, which gives point (0, −1) The Gradient-Intercept Method The linear equation needs to be arranged in the form 𝒚=𝒎𝒙+𝒄 * Plot the y-intercept on the graph (0,𝑐) * Use ′𝑚′ (the gradient) to determine the next point to plot 𝑚= 𝑟𝑖𝑠𝑒 𝑟𝑢𝑛 * Join the two points together eg3: Use the gradient-intercept method to draw the graph of 𝒚=𝟑𝒙−𝟏 The y-intercept is -1, which gives point (0, −1) To sketch, we need one more point. We can find this from gradient, 𝑚=3= 3 1 = 𝑟𝑖𝑠𝑒 𝑟𝑢𝑛 This tells us, for every 3 points up (risen), we move across 1 point (run). (1, 2) (0, -1)

Review - Sketching Linear Graphs Rearranging an equation from 𝑎𝑥+𝑏𝑦=𝑐 into 𝑦=𝑚𝑥+𝑐 form Rearrange 4𝑥+2𝑦=12 to 𝑦=𝑚𝑥+𝑐 form: We want to make y the subject: 2𝑦=−4𝑥+12 𝑦= −4𝑥+12 2 𝑦=−2𝑥+6

Review - Sketching Linear Graphs Rearranging an equation from 𝑎𝑥+𝑏𝑦=𝑐 into 𝑦=𝑚𝑥+𝑐 form Rearrange −6𝑥+3𝑦=15 to 𝑦=𝑚𝑥+𝑐 form: We want to make y the subject: 3𝑦=6𝑥+15 𝑦= 6𝑥+15 3 𝑦=2𝑥+5

Review - Sketching Linear Graphs The 𝑥−𝑦 Intercept Method Can be used for linear equations in either form 𝑦=𝑚𝑥+𝑐 or 𝑎𝑥+𝑏𝑦+𝑐=0 * Find 𝑦-intercept: Solve 𝑦 when 𝑥 =0 by substituting 𝑥=0 into the linear equation, this gives (0, 𝑦) * Find 𝑥-intercept: Solve 𝑥 when 𝑦 =0 by substituting 𝑦=0 into the linear equation, this gives 𝑥, 0 * Plot these two points on the graph and rule them together to form a line.

eg1. Sketch the line given by the equation 2𝑥+3𝑦=6 Let 𝑥=0: 2 0 +3𝑦=6 The 𝑥−𝑦 Intercept Method Can be used for linear equations in either form y = mx + c or ax + by = c * Find 𝑦-intercept: Solve 𝑦 when 𝑥 =0 by substituting 𝑥=0 into the linear equation, this gives (0, 𝑦) * Find 𝑥-intercept: Solve 𝑥 when 𝑦 =0 by substituting 𝑦=0 into the linear equation, this gives 𝑥, 0 * Plot these two points on the graph and rule them together to form a line. eg1. Sketch the line given by the equation 2𝑥+3𝑦=6 Let 𝑥=0: 2 0 +3𝑦=6 3𝑦=6 𝑦=2 (0, 2) Let 𝑦=0: 2𝑥+3(0)=6 2𝑥=6 𝑥=3 (3, 0) (0, 2) (3, 0)

eg2. Sketch the line given by the equation −4𝑥+2𝑦=8 Let 𝑥=0: The 𝑥−𝑦 Intercept Method Can be used for linear equations in either form y = mx + c or ax + by = c * Find 𝑦-intercept: Solve 𝑦 when 𝑥 =0 by substituting 𝑥=0 into the linear equation, this gives (0, 𝑦) * Find 𝑥-intercept: Solve 𝑥 when 𝑦 =0 by substituting 𝑦=0 into the linear equation, this gives 𝑥, 0 * Plot these two points on the graph and rule them together to form a line. eg2. Sketch the line given by the equation −4𝑥+2𝑦=8 Let 𝑥=0: −4 0 +2𝑦=8 2𝑦=8 𝑦=4 (0, 4) Let 𝑦=0: −4𝑥+2(0)=8 −4𝑥=8 𝑥=−2 (−2, 0) (0, 4) (-2, 0)

eg3. Sketch the line given by the equation 𝑦=3𝑥+6 Let 𝑥=0: 𝑦=3𝑥+6 The 𝑥−𝑦 Intercept Method Can be used for linear equations in either form y = mx + c or ax + by = c * Find 𝑦-intercept: Solve 𝑦 when 𝑥 =0 by substituting 𝑥=0 into the linear equation, this gives (0, 𝑦) * Find 𝑥-intercept: Solve 𝑥 when 𝑦 =0 by substituting 𝑦=0 into the linear equation, this gives 𝑥, 0 * Plot these two points on the graph and rule them together to form a line. eg3. Sketch the line given by the equation 𝑦=3𝑥+6 Let 𝑥=0: 𝑦=3𝑥+6 𝑦=3 0 +6 𝑦=6 (0, 6) Let 𝑦=0: 0=3𝑥+6 −6=3𝑥 𝑥= −6 3 =−2 (−2, 0) (0, 6) (-2, 0)

eg. Sketch the line given by the equation 𝑦=4 In this topic you will also come across more basic graphs, involving only an 𝑥 or 𝑦 variable eg. Sketch the line given by the equation 𝑦=4 (0, 4)

eg2. Sketch the line given by the equation 𝑥=−6 In this topic you will also come across more basic graphs, involving only an 𝑥 or 𝑦 variable eg2. Sketch the line given by the equation 𝑥=−6 (-6, 0)

eg3. Sketch the line given by the equation 𝑦=0 In this topic you will also come across more basic graphs, involving only an 𝑥 or 𝑦 variable eg3. Sketch the line given by the equation 𝑦=0 (0, 0)

Now Try Worksheet One Page One

Review - Sketching Linear Graphs Using the calculator to sketch graphs 𝒙=𝟑 Highlight and drag into the graph box

Review - Sketching Linear Graphs Using the calculator to sketch graphs 𝒚=𝟐 Highlight and drag into the graph box

Review - Sketching Linear Graphs Using the calculator to sketch graphs 𝒚=𝟑𝒙+𝟔 To find the co-ordinates of the y-intercept: Analysis  G-Solve  y-intercept To find the co-ordinates of the x-intercept Analysis  G-Solve  root Highlight and drag into the graph box

Review - Sketching Linear Graphs Using the calculator to sketch graphs 𝟏𝟎𝒙+𝟐𝒚=𝟔 To find the co-ordinates of the y-intercept: Analysis  G-Solve  y-intercept To find the co-ordinates of the x-intercept Analysis  G-Solve  root Highlight and drag into the graph box

Review - Sketching Linear Graphs Using the calculator to sketch 2 graphs on one plot 𝟏𝟎𝒙+𝟐𝒚=𝟔 To find the co-ordinates of the Point of Intersection: Analysis  G-Solve  Intersect Highlight and drag each equation into the graph box 𝒚=−𝒙+𝟑

Now: Then: Check your answers to the worksheet using your calculator Do the other side of the page Now: Then:

Understanding Inequalities What do the following symbols represent? < > ≤ ≥ 𝑥<4 𝑥 𝑖𝑠 4 𝑥>12 𝑥 𝑖𝑠 12 𝑥≤ 8 𝑥 𝑖𝑠 8 𝑥≥−3 𝑥 𝑖𝑠 −3 less than greater than less than or equal to greater than or equal to less than greater than less than or equal to greater than or equal to

Understanding Inequalities How can we represent these values on a number line? 𝑥>3 𝑥<4 1<𝑥<7 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10

Understanding Inequalities What about on an x-y axis? Shade the region which isn’t included in the range. 𝑥>3 𝑥≤4 −2<𝑥<4 Check your answer by choosing a test point in the unshaded area and sub it into the equation.

Understanding Inequalities What about on an x-y axis? Shade the region which isn’t included in the range. 𝑦>1 y≤2 −6<𝑦<0 Check your answer by choosing a test point in the unshaded area and sub it into the equation.

Understanding Inequalities What about on an x-y axis? Shade the region which isn’t included in the range. 𝑦>6 x≤−3 2<𝑥<8 Check your answer by choosing a test point in the unshaded area and sub it into the equation.

Now Try Exercise 11.2 Questions 1, 2, 3, 4, 7

Plotting Inequalities with BOTH 𝑥 and 𝑦 eg. Draw the graph of the inequation 𝒚<𝟐𝒙+𝟓 Plot the graph of 𝑦=2𝑥+5 Decide which side is defined by the equation by choosing a test point and checking if it satisfies the inequality equation 0<2 0 +5 0<0+5 0<5 So we can leave this side of the graph and shade the other side of the line Try (0, 0): Is this true? YES

Plotting Inequalities with BOTH 𝑥 and 𝑦 eg. Draw the graph of the inequation 𝒚−𝟒𝒙<𝟐 Plot the graph of 𝑦−4𝑥=2 Decide which side is defined by the equation by choosing a test point and checking if it satisfies the inequality equation 0−4(0)<2 0<2 So we can leave this side of the graph and shade the other side of the line Try (0, 0): Is this true? YES

Plotting Inequalities with BOTH 𝑥 and 𝑦 eg. Draw the graph of the inequation 𝒚+𝟑𝒙>𝟔 Plot the graph of 𝑦+3𝑥=6 Decide which side is defined by the equation by choosing a test point and checking if it satisfies the inequality equation 0+3 0 >6 0>6 So we can shade the side of the graph that includes the point ( 0, 0) Try (0, 0): Is this true? NO

Plotting Inequalities with BOTH 𝑥 and 𝑦 eg. Draw the graph of the inequation 𝟐𝒚+𝟒𝒙≥𝟔 Plot the graph of 2𝑦+4𝑥=6 Decide which side is defined by the equation by choosing a test point and checking if it satisfies the inequality equation 2 0 +4 0 ≥6 0≥6 So we can shade the side of the graph that includes the point ( 0, 0) Try (0, 0): Is this true? NO

Now Try Exercise 11.2 Questions 5, 6, 8, 9, 10, 11, 13, 16, 17b, 18a

Graphing two inequations on one plot We plot 2 inequations on the same axis & find the region which satisfies both inequations. We will again shade the region not defined by the inequation, leaving the required area unshaded. Required region eg1. 𝒙≥𝟏 𝒚≥𝟑 Plot each of these on the axis Shade the area not defined by the inequation The remaining region satisfies both inequations

Graphing two inequations on one plot We will again shade the region not defined by the inequation, leaving the required area unshaded. eg2. 𝒙≤𝟎 𝒚>𝟓 Required region Plot each of these on the axis Shade the area not defined by the inequation The remaining region satisfies both inequations

Graphing two inequations on one plot We will again shade the region not defined by the inequation, leaving the required area unshaded. eg3. 𝒙<𝟎 𝒚>𝟐𝒙+𝟏 Required region Plot each of these on the axis Shade the area not defined by the inequation The remaining region satisfies both inequations Check your answer using a test point

𝒚<𝟐𝒙+𝟏 𝒚+𝒙≥𝟒 eg4. Sketch the pair of simultaneous inequations. Label the point of intersection (POI) on your graph 𝒚<𝟐𝒙+𝟏 𝒚+𝒙≥𝟒 Required region Plot each of these on the axis Shade the area not defined by the inequation The remaining region satisfies both inequations Check your answer using a test point Highlight the Point of Intersection on the graph

𝒙−𝒚>𝟑 𝒚+𝒙≤𝟐 eg5. Sketch the pair of simultaneous inequations. Label the point of intersection (POI) on your graph 𝒚+𝒙≤𝟐 𝒙−𝒚>𝟑 Required region Plot each of these on the axis Shade the area not defined by the inequation The remaining region satisfies both inequations Check your answer using a test point Highlight the Point of Intersection on the graph

Now Try Exercise 11.3 Questions 1, 2, 3, 4, 11, 12, 14

Graphing systems of inequations on one plot We will again shade the region not defined by the inequation, leaving the required area unshaded. eg1. Find the required region defined by the system of inequations 𝒙≥𝟎 𝒚≥𝟏 𝒚<𝟖 𝒙≤𝟔 Required region Plot each of these on the axis Shade the area not defined by the inequation The remaining region satisfies all inequations

Graphing systems of inequations on one plot eg2. Find the required region defined by the system of inequations 𝒙≥𝟑 𝒙≤𝟕 𝒚≥𝟑 𝒚<𝟔 Required region Plot each of these on the axis Shade the area not defined by the inequation The remaining region satisfies all inequations

Graphing systems of inequations on one plot eg3. Find the required region defined by the system of inequations 𝒙≥𝟏 𝐲≤𝟐 𝒚<𝟑𝒙−𝟏 →𝑡𝑒𝑠𝑡 𝑝𝑜𝑖𝑛𝑡 0,0 : 0<−1 FALSE– So shade region which includes the point (0,0) Required region

Graphing systems of inequations on one plot eg4. Find the required region defined by the system of inequations 𝒙≥𝟏 𝒚≤−𝟐𝒙+𝟓 →𝑡𝑒𝑠𝑡 𝑝𝑜𝑖𝑛𝑡 0,0 : 0<5 TRUE– So leave region which includes the point (0,0) 𝒚<𝟐𝒙−𝟗 →𝑡𝑒𝑠𝑡 𝑝𝑜𝑖𝑛𝑡 0,0 : 0<−9 FALSE– So shade region which Required region

Now Try Exercise 11.3 Questions 1, 2, 3, 4, 11, 12, 14

Maximising and minimising linear functions Using linear programming, we can maximise or minimise linear functions subject to constraints given by a set of linear inequations. Today we will do this using the corner point method, using the following steps: Sketch the feasible region Determine the coordinates of the corner points of the feasible region Substitute the coordinates of the corner points into the given objective function (the linear equation to be maximised or minimised) 4. Choose which set of coordinates produces the maximum or minimum value, as stated in the question.

𝑧=𝑥+2𝑦 eg1. Maximise 𝑧=𝑥+2𝑦 subject to the system of inequations Sketch the feasible region Determine the coordinates of the corner points of the feasible region Sub. the corner points into the objective function (the linear equation to be maximised or minimised) 4. Choose which set of coordinates produces the maximum or minimum value, as stated in the question eg1. Maximise 𝑧=𝑥+2𝑦 subject to the system of inequations 𝒙≥𝟎 𝒚≥𝟏 𝒚<𝟖 𝒙≤𝟔 Required region Corner Points (0, 1) (0, 8) (6, 1) (6, 8) 𝑧=𝑥+2𝑦 𝑧=0+(2×1) =2 𝑧=0+(2×8) =16 𝑧=6+(2×1) =8 𝑧=6+(2×8) =22 𝑍 𝑚𝑎𝑥 =22

𝑧=2𝑥−2𝑦 eg2. Minimise 𝑧=2𝑥−2𝑦 subject to the system of inequations Sketch the feasible region Determine the coordinates of the corner points of the feasible region Sub. the corner points into the objective function (the linear equation to be maximised or minimised) 4. Choose which set of coordinates produces the maximum or minimum value, as stated in the question eg2. Minimise 𝑧=2𝑥−2𝑦 subject to the system of inequations 𝒙≥𝟎 𝒚≥𝟑 𝒚<𝟏𝟎 𝒙≤𝟒 Required region Corner Points (0, 3) (0, 10) (4, 3) (4, 10) 𝑧=2𝑥−2𝑦 𝑧= 2×0 −(2×3) =−6 𝑧= 2×0 −(2×10) =−20 𝑧= 2×4 −(2×3) =8−6=2 𝑧= 2×4 −(2×10) =8−20=−12 𝑍 𝑚𝑖𝑛 =−20

𝑧=3𝑥+2𝑦 eg3. Maximise 𝑧=3𝑥+2𝑦 subject to the system of inequations Sketch the feasible region Determine the coordinates of the corner points of the feasible region Sub. the corner points into the objective function (the linear equation to be maximised or minimised) 4. Choose which set of coordinates produces the maximum or minimum value, as stated in the question eg3. Maximise 𝑧=3𝑥+2𝑦 subject to the system of inequations 𝒙≥𝟎 𝒚≥𝟎 𝟐𝒚+𝟐𝒙<𝟖 Required region Corner Points (0, 0) (0, 4) (4, 0) 𝑧=3𝑥+2𝑦 𝑧= 3×0 +(2×0) =0 𝑧= 3×0 +(2×4) =8 𝑧= 3×4 +(2×0) =12 𝑍 𝑚𝑎𝑥 =12

𝑧=4𝑥−𝑦 eg4. Minimise 𝑧=4𝑥−𝑦 subject to the system of inequations Sketch the feasible region Determine the coordinates of the corner points of the feasible region Sub. the corner points into the objective function (the linear equation to be maximised or minimised) 4. Choose which set of coordinates produces the maximum or minimum value, as stated in the question eg4. Minimise 𝑧=4𝑥−𝑦 subject to the system of inequations 𝒚≥−𝟔 𝒚≤𝟑𝒙−𝟔 𝟐𝒚+𝟒𝒙<𝟖 Required region Corner Points (2, 0) (0, -6) (6, -6) 𝑧=4𝑥−𝑦 𝑧= 4×2 −0 =8 𝑧= 4×0 −−6 =6 𝑧= 4×6 −−6 =24+6=30 𝑍 𝑚𝑖𝑛 =6

Now Try Exercise

Now Try Worksheet Maximum/Minimum Problems Solutions on the following 4 slides

We are asked to Maximise – the largest solution from above is 10. eg1. For the following system of inequations: Maximise z = x + y subject to 𝑥 ≥ 0, 𝑦 ≥ 0, 𝑥 ≤ 4, 𝑦 ≤ 6 𝐴: 0, 0 → 𝑧=𝑥+𝑦 = 0+0 =0 𝐵: 0, 6 → 𝑧=𝑥+𝑦=0+6=6 𝐶: 4, 6 →𝑧=𝑥+𝑦=4+6=10 𝐷: 4,0 →𝑧=𝑥+𝑦=4+0=4 We are asked to Maximise – the largest solution from above is 10. So 𝑍 𝑚𝑎𝑥 =10

We are asked to Maximise – the largest solution from above is 15 eg2. For the following system of inequations: Maximise z = 2x + 3y subject to 𝑥 ≥ 0, 𝑦 ≥ 0, 𝑦≤2𝑥+3, 2𝑥+𝑦≤6 y ≤ 2x+3, 2x+y ≤ 6 𝐴: 0, 0 → 𝑧=2𝑥+3𝑦 = 0+0 =0 𝐵: 0, 3 → 𝑧=2𝑥+3𝑦=0+(3×3)=9 𝐶: 0.75, 4.5 →𝑧=2𝑥+3𝑦= 2×.75 +(3×4.5)=15 𝐷: 3,0 →𝑧=2𝑥+3𝑦=(2×3)+0=6 We are asked to Maximise – the largest solution from above is 15 So 𝑍 𝑚𝑎𝑥 =15

We are asked to Minimise – the smallest solution from above is - 4 eg3. For the following system of inequations: Minimise z = 2x - y subject to 𝑥 ≥ 0, 𝑦 ≥ 0, 𝑦 ≤ 4, 𝑥 ≤ 8 𝐴: 0, 0 → 𝑧=2𝑥−𝑦 = 0−0 =0 𝐵: 0, 4 → 𝑧=2𝑥−𝑦=0−4=−4 𝐶: 8, 4 →𝑧=2𝑥−𝑦=16−4=12 𝐷: 8,0 →𝑧=2𝑥−𝑦=16+0=16 We are asked to Minimise – the smallest solution from above is - 4 So 𝑍 𝑚𝑖𝑛 =−4

eg4. For the following system of inequations: Maximise z = x + 3y subject to 𝑥 ≥ 0, 𝑦 ≥ 0, 𝑥+𝑦≤8, 2𝑦−2𝑥≤4 𝐴: 0, 0 → 𝑧=𝑥+3𝑦 = 0+0 =0 𝐵: 0, 2 → 𝑧=𝑥+3𝑦=0+(3×2)=6 𝐶: 3, 5 →𝑧=𝑥+3𝑦= 3×3 + 3×5 =9+15=24 𝐷: 8,0 →𝑧=𝑥+3𝑦=(1×8)+0=8 We are asked to Maximise – the largest solution from above is 24 So 𝑍 𝑚𝑎𝑥 =24

Linear Programming Applications: Solving worded problems These problems involve converting worded problems into a series of linear inequations. Using the corner points of the feasible region, we can solve real problems involving finding a maximum or minimum number – ie. Finding a maximum profit, or a minimum Cost. Objective function is the Profit or Cost equation that we are trying to maximise or minimise. Constraints are the linear inequations we create and sketch to find the feasible region. Constraints may include things like the amount of material we have to make something or the amount of time it takes to do something

Linear Programming Applications: Solving worded problems eg1. A local factory produces runners and walking shoes. It is able to produce a minimum of 400 pairs of runners and 350 pairs of walking shoes. The factory is capable of producing a maximum of 900 pairs of shoes altogether. The profit on a pair of runners is $12.50 and on a pair of walking shoes, $10. What combination of shoes should the factory make to maximise profits? 1. Define to variables to solve your question: 2. Define the Objective Function: 3. Define the Constraints: 𝑥=𝑛𝑢𝑚𝑏𝑒𝑟 𝑜𝑓 𝑝𝑎𝑖𝑟𝑠 𝑜𝑓 𝑟𝑢𝑛𝑛𝑒𝑟𝑠 𝑦=𝑛𝑢𝑚𝑏𝑒𝑟 𝑜𝑓 𝑝𝑎𝑖𝑟𝑠 𝑜𝑓 𝑤𝑎𝑙𝑘𝑖𝑛𝑔 𝑠ℎ𝑜𝑒𝑠 𝑃=12.5𝑥+10𝑦 𝑚𝑖𝑛𝑖𝑚𝑢𝑚 𝑟𝑢𝑛𝑛𝑒𝑟𝑠: 𝑚𝑖𝑛𝑖𝑚𝑢𝑚 𝑤𝑎𝑙𝑘𝑖𝑛𝑔 𝑠ℎ𝑜𝑒𝑠: 𝑡𝑜𝑡𝑎𝑙 𝑚𝑎𝑥𝑖𝑚𝑢𝑚: 400≤𝑥 350≤𝑦 900≥𝑥+𝑦

1. Define to variables to solve your question: 𝑥=𝑛𝑢𝑚𝑏𝑒𝑟 𝑜𝑓 𝑝𝑎𝑖𝑟𝑠 𝑜𝑓 𝑟𝑢𝑛𝑛𝑒𝑟𝑠 𝑦=𝑛𝑢𝑚𝑏𝑒𝑟 𝑜𝑓 𝑝𝑎𝑖𝑟𝑠 𝑜𝑓 𝑤𝑎𝑙𝑘𝑖𝑛𝑔 𝑠ℎ𝑜𝑒𝑠 1. Define to variables to solve your question: 2. Define the Objective Function: 3. Define the Constraints: 𝑃=12.5𝑥+10𝑦 𝑚𝑖𝑛𝑖𝑚𝑢𝑚 𝑟𝑢𝑛𝑛𝑒𝑟𝑠: 400≤𝑥 𝑚𝑖𝑛𝑖𝑚𝑢𝑚 𝑤𝑎𝑙𝑘𝑖𝑛𝑔 𝑠ℎ𝑜𝑒𝑠: 350≤𝑦 𝑡𝑜𝑡𝑎𝑙 𝑚𝑎𝑥𝑖𝑚𝑢𝑚: 900≥𝑥+𝑦 4. Plot the constraints and find the feasible region: 5. Find the corner points of the feasible region and label them: 𝐴: 400,350 𝐵: 400, 500 𝐶: 550,350 6. Use the corner points to solve the objective function: 𝐴: 400,350 𝑃=12.5 400 +10 350 =8500 𝐵: 400,500 𝑃=12.5 400 +10 500 =10000 𝐶: 550,350 𝑃=12.5 550 +10 350 =10375 7. Answer the question given in the initial problem: We want to maximise profit, so if 550 pairs of runners and 350 pairs of walkers are produced and sold, the company makes a profit of $10375

Linear Programming Applications: Solving worded problems eg2. A farmer has a plot of 35 hectare plot of land to plant oats and wheat. Oats require 3 hours of labour to produce per hectare. Wheat require 4 hours of labour to produce per hectare. A total of 120 hours of labour is available. Profit on oats is $200 per hectare and wheat is $240 per hectare. What should he plant to maximise profits? 1. Define to variables to solve your question: 2. Define the Objective Function: 3. Define the Constraints: 𝑥=ℎ𝑒𝑐𝑡𝑎𝑟𝑒 𝑜𝑓 𝑜𝑎𝑡𝑠 𝑦=ℎ𝑒𝑐𝑡𝑎𝑟𝑒 𝑜𝑓 𝑤ℎ𝑒𝑎𝑡 𝑃=200𝑥+240𝑦 35≥𝑥+𝑦 120≥3𝑥+4𝑦 𝑥≥0 𝑦≥0 𝑆𝑝𝑎𝑐𝑒 𝐴𝑣𝑎𝑖𝑙𝑎𝑏𝑙𝑒: 𝐿𝑎𝑏𝑜𝑢𝑟:

1. Define to variables to solve your question: 2. Define the Objective Function: 3. Define the Constraints: 𝑥=ℎ𝑒𝑐𝑡𝑎𝑟𝑒 𝑜𝑓 𝑜𝑎𝑡𝑠 𝑦=ℎ𝑒𝑐𝑡𝑎𝑟𝑒 𝑜𝑓 𝑤ℎ𝑒𝑎𝑡 𝑃=200𝑥+240𝑦 𝑆𝑝𝑎𝑐𝑒 𝐴𝑣𝑎𝑖𝑙𝑎𝑏𝑙𝑒: 35≥𝑥+𝑦 120≥3𝑥+4𝑦 𝑥≥0 𝑦≥0 𝐿𝑎𝑏𝑜𝑢𝑟: 4. Plot the constraints and find the feasible region: 5. Find the corner points of the feasible region and label them: 𝐴: 0, 0 𝐵: 0, 30 𝐶: 20, 15 D:(35,0) 6. Use the corner points to solve the objective function: 𝐴: 0,0 𝑃=200 0 +240 0 =0 𝐵: 0, 30 𝑃=200 0 +240 30 =0+7200=7200 𝐶: 20,15 𝑃=200 20 +240 15 =4000+3600=7600 𝐷: 35,0 𝑃=200 35 +240 0 =7000 7. Answer the question given in the initial problem: We want to maximise profit, so if 20ha of oats and 15ha of wheat is produced, the farmer will achieve a maximum profit of $7600

Worksheet Exercise Now try then