Date of download: 12/30/2017 Copyright © ASME. All rights reserved. From: Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane J. Comput. Inf. Sci. Eng. 2016;16(4):041007-041007-5. doi:10.1115/1.4034032 Figure Legend: DSC diagram of TPU powders from −50 °C to 200 °C at the rate of cooling and heating at 10 °C/min

Date of download: 12/30/2017 Copyright © ASME. All rights reserved. From: Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane J. Comput. Inf. Sci. Eng. 2016;16(4):041007-041007-5. doi:10.1115/1.4034032 Figure Legend: Specimen dimensions (in mm; thickness is 2 mm) in the ASTM D638 standard, type IV

Date of download: 12/30/2017 Copyright © ASME. All rights reserved. From: Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane J. Comput. Inf. Sci. Eng. 2016;16(4):041007-041007-5. doi:10.1115/1.4034032 Figure Legend: Illustration of a typical SME cycle for TPU [21]

Date of download: 12/30/2017 Copyright © ASME. All rights reserved. From: Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane J. Comput. Inf. Sci. Eng. 2016;16(4):041007-041007-5. doi:10.1115/1.4034032 Figure Legend: Powder shape and surface morphology of TPU powders (DESMOSINT X92) by field-emission scanning electron microscopy (FESEM)

Date of download: 12/30/2017 Copyright © ASME. All rights reserved. From: Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane J. Comput. Inf. Sci. Eng. 2016;16(4):041007-041007-5. doi:10.1115/1.4034032 Figure Legend: (a) The powder bed of SLS process at 96 °C and (b) the sintered specimen (Tensile bar in ASTM D638)

Date of download: 12/30/2017 Copyright © ASME. All rights reserved. From: Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane J. Comput. Inf. Sci. Eng. 2016;16(4):041007-041007-5. doi:10.1115/1.4034032 Figure Legend: Strain versus stress curves of sintered TPU specimens upon stretching to different maximum strains of 100%, 200%, and 300%, at the room temperature of 25 °C

Date of download: 12/30/2017 Copyright © ASME. All rights reserved. From: Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane J. Comput. Inf. Sci. Eng. 2016;16(4):041007-041007-5. doi:10.1115/1.4034032 Figure Legend: Typical strain versus stress curves obtained at three different temperatures of 25 °C, 60 °C, and 95 °C, upon stretching to a maximum programming strain of 100%

Date of download: 12/30/2017 Copyright © ASME. All rights reserved. From: Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane J. Comput. Inf. Sci. Eng. 2016;16(4):041007-041007-5. doi:10.1115/1.4034032 Figure Legend: Evaluation of the instant shape fixity ratio (Rfi, black line) and the long-term shape fixity ratio (Rfl, blue line) upon stretching for 0, 30, and 60 min at the maximum programming strains of 200% and 300%, at the room temperature

Date of download: 12/30/2017 Copyright © ASME. All rights reserved. From: Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane J. Comput. Inf. Sci. Eng. 2016;16(4):041007-041007-5. doi:10.1115/1.4034032 Figure Legend: Shape-recovery ratio (Rr) of specimens prestretched to the maximum programming strains of 200% and 300% for 0 and 30 min, under different recovery temperatures of 35 °C, 60 °C, and 95 °C

Date of download: 12/30/2017 Copyright © ASME. All rights reserved. From: Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane J. Comput. Inf. Sci. Eng. 2016;16(4):041007-041007-5. doi:10.1115/1.4034032 Figure Legend: Strain versus stress curves of the sintered TPU over four cycles of stretching–creeping–thermal stimulation (a) upon stretching to 200% strain for 0 min and (b) upon stretching to 200% strain for 30 min, and (c) final fixity ratios of the sintered TPU over four cycles with respect to different holding durations