What is a Bridge? A Structure across an obstacle to allow safe passage.

Slides:



Advertisements
Similar presentations
BRIDGES! July
Advertisements

What do I need to know to build one ……….. Types of Bridges Arch Bridge Beam Bridge Suspension Bridge Cable Stays Bridge Combination Bridge.
6 Structures © Goodheart-Willcox Co., Inc Permission granted to reproduce for educational use only.
Characteristics of Three Bridge Types
TODAY ADD LEGO rubric to end of your lab write-up for LEGO NXT
BRIDGES February 7th 2009 Maria F. Parra
ENG-1010 Lecture 16 Bridge Design.
Bridge Engineering: Lessons from Rome to Tacoma
BRIDGES Maria F. Parra November 3, 2001 FIU Revised June 2003
There are more than 500,000 bridges in the United States!
 The biggest difference is the distance they can cross in a single span.  A modern arch can safely span up to 800 or 1,000 feet.  While a suspension.
Learning Standards 5. Construction Technologies Construction technology involves building structures in order to contain, shelter, manufacture, transport,
 Every bridge ever constructed had the same 4 stresses to overcome.  Tensile Stress- Forces that try to stretch material and pull it apart.  Compression-
MEGA STRUCTURES BRIDGES
Types of Structures  Residential - Structures in which people live.  Ex. Single family houses, condominiums, and apartment complexes.  Industrial -
There are many types of bridges including:
What is a Bridge Exactly? A structure spanning and providing a passage over a gap or a barrier A supported, elevated structure.
Main Goals of this Activity
Critical Thinking in Engineering Process
Bridges Vocabulary. Bridge  A structure used to help people cross valleys, rivers and bodies of water.
Bridges.
Beam Bridge consists of a horizontal beam supported at each end by piers. The weight of the beam pushes straight down on the piers. The farther apart.
Bridges & Forces.
Bridging the Gap: Building Bridges 101, It Is Time to Get To Work
1 Bridges 8 th Grade Science Butler Middle School Lowell, MA Bob, Paul and Ms Adams April 24, 2012.
BRIDGE BASICS THERE ARE THREE MAIN TYPES OF BRIDGES: BEAM BRIDGE
BRIDGES Greenwood Lake Middle School TECHNOLOGY. History of Bridge DevelopmentHistory of Bridge Development How Bridges Work Basic Concepts Types of Bridges.
BRIDGES.
A swinging cable and wooden plank bridge in a New Zealand rain forest.
Bridges Introduction to design.
 Balsa Wood Bridge 8 th. How Does a Bridge Stay Up?
Engineering Structures Bridge Building. Structures Structures are anything that are built or constructed. These are things we live in, work in, learn.
Enhancing Thinking Skills in Science Context Lesson 6
BRIDGES Christopher Rego October 28, 2006 Revised June 2003 SECME – M-DCPS Division of Mathematics and Science Education FIU.
Forces on Bridges How are bridges designed to withstand the forces that act on them?
Work Plan History of Bridge Development How Bridges Work
Does your group have what it takes to build a bridge?
BRIDGES. History of Bridge Development How Bridges Work Basic Concepts Types of Bridges Concepts Associated with Bridge Engineering Truss Analysis Tips.
THE HISTORY OF BRIDGES TRANSPORTATION IN AMERICA.
Beam Bridge. Sidney Lanier Bridge Under Construction.
Identify the forces that act on structures Forces Next > In this presentation you will:
Structures What things do I need to find out in order to predict if what I design will stand up to the use I intend to put it through?
Bridges bridge, span a structure that allows people or vehicles to cross an obstacle such as a river or canal or railway etc.span physics, the physical.
Structural Technology Foundations of Technology Standard 20: Students will develop an understanding of and be able to select and use construction technologies.
Bridges.  A bridge provides passage over some sort of obstacle: a river, a valley, a road, a set of railroad tracks... Etc…  The type of bridge used.
Bridges and Loads Modified by Matthew Silbernagel.
Types of Bridges Images Forces Acting on Bridges
8 th Grade Applied Technology Mr. Giannone. In this unit we will study structures and the forces that affect them.
Bridge Structures.
BRIDGES.
By: Mohamed Ahmed, EIT Clark dietz, inc
Engineering Terms Bridge Unit.
Understanding Structural Engineering
BRIDGES Maria F. Parra November 3, 2001 FIU Revised June 2003
Design & Engineering CAMS South
BRIDGES.
Beam bridge Truss bridge Arch bridge Suspension bridge
Bridge design project Quentin Rahimi Period 5.
BRIDGES February 7th 2009 Maria F. Parra
Bridge Engineering: Lessons from Rome to Tacoma
Bridge Construction Mr. Banks.
Design Brief Liam and Dorsa.
BRIDGES SECME – M-DCPS Division of Mathematics and Science Education
BRIDGES Maria F. Parra November 3, 2001 FIU Revised June 2003
Q7. ____________________have short spans usually less than 250 feet.
Bridge Design Tyrus Charley 10/19/16 P7.
Engineering Technology Program
BRIDGES Maria F. Parra November 3, 2001 FIU Revised June 2003
BRIDGES by Parveen Kumar.
BRIDGE PROJECT Hunter fuller Period 5.
Presentation transcript:

What is a Bridge? A Structure across an obstacle to allow safe passage

The Sault Ste. Marie International Bridge made traveling across the St The Sault Ste. Marie International Bridge made traveling across the St. Mary's River and the Soo Locks much more desirable.

Mackinac Bridge The Mighty Mac

London Bridge

Confederation Bridge

Loads: Dead or Alive Two categories of loads try to destroy structures. They are known as: Dead loads, and Live Loads Dead loads are the permanent loads on a structure. For example, the self weight of a bridge Live loads are all the variable loads, those that occur from time to time. For example, your weight in the classroom

Loads: Dead or Alive List Loads Dead Live

Completion Of Bridge Loads Live Loads Dead Loads Pedestrians Bikes Cars Trucks Trains Snow Wind Earthquake Self-weight Concrete, steel, asphalt Lights

Loads Create Forces Types of Forces Tension Compression

Tension and Compression Activity Drawings are used by architects and engineers to communicate important information. Use your sketching skills to draw the wheel of a bicycle and a step ladder. Note on the sketch which components are in tension and which components are in compression.

Types of Bridges Beam Bridge2 When something pushes down on the beam, the beam bends. Its top edge is pushed together, and its bottom edge is pulled apart.

Sault Ste. Marie International Bridge

Types of Bridges Arch Bridge2 The arch is squeezed together, and this squeezing force is carried outward along the curve to the supports at each end. The supports, called abutments, push back on the arch and prevent the ends of the arch from spreading apart.

Arch Bridge

Types of Bridges Truss Bridge2 Every bar in this cantilever bridge experiences either a pushing or pulling force. The bars rarely bend. This is why cantilever bridges can span farther than beam bridges.

Truss Bridge

Types of Bridges Suspension Bridge2 In all suspension bridges, the roadway hangs from massive steel cables, which are draped over two towers and secured into solid concrete blocks, called anchorages, on both ends of the bridge. The cars push down on the roadway, but because the roadway is suspended, the cables transfer the load into compression in the two towers. The two towers support most of the bridge's weight.

Suspension Bridge

Types of Bridges Cable-Stayed Bridge2 The cable-stayed bridge, like the suspension bridge, supports the roadway with massive steel cables, but in a different way. The cables run directly from the roadway up to a tower, forming a unique "A" shape.

Cable-Stayed Bridge

Building Materials Need to pick the best material Wood, plastic, concrete, steel, aluminum Compare forces that the material must resist to the properties of the material Don’t forget Cost Materials Lab2

Elasticity Bridges sway and flex under loads. But when the loads are removed the bridge returns to its original shape. The property that the bridge possess to return to its original shape is called elasticity.

Elasticity Demonstrated Demonstrate, to yourself, the elasticity behavior of an elastic band by gently pulling and releasing the tension in it. An eraser can easily substitute for the elastic band. But instead of pulling, slightly twist it. Did you notice how both the elastic band and eraser returned to their original shape?

Elasticity Bridge members don’t experience the extreme elongation or twist that you noticed with the elastic band and eraser demonstration. They experience more moderate shape changes that are not easily detected by the human senses unless you pay real close attention. Next time you are stuck in traffic on a bridge pay attention to the rocking motion of your vehicle as a heavy truck goes by in the opposite direction.

Contest Information Refer to your handout on contest information and please feel free to ask questions. Make sure that you are clear on the following points: materials to be used construction specifications judging categories testing procedure

References BUILDING BIG: All About Bridges Nova Online, Super Bridge, Build a Bridge http://www.pbs.org/wgbh/nova/bridge/build.html BUILDING BIG: All About Bridges http://www.pbs.org/wgbh/buildingbig/bridge/ West Point Bridge Design Contest http://bridgecontest.usma.edu/