Analyse Bubbles of Laminated Glass with EVA Film Interlayer

Slides:



Advertisements
Similar presentations
Extrusion-Based Processes
Advertisements

1 Trade Skills HVACR116 Fiberglass Duct Board and Insulation Material.
Fabrication of Alumina/ Alkali Zinc Phosphate (AZP) Glass Laminates MSE REU Summer 2002 Presented by: Yeon Kim Advisor: Prof. Trice.
GCSE Graphic Products Shaping and Forming Plastics
Glass. Raw Materials Soda-lime-silicate which is made from –silica (sand) –Soda –Lime.
Introduction to Soldering
W INDOW S OLUTIONS By Deniesha Lloyd Dainty Deesigns.
Hybrid panel heated plate study Currently the curing of the ASIC glue for the hybrid panels are done at room temperature. This is a study to determine.
© 2015 albert-learning.com How to talk to your boss How to talk to your boss!!
Howto Test Properties Characteristics of Glass Lamination Ethylene-vinyl acetate EVA Interlayer Film Created by China Ethylene-vinyl acetate EVA Interlayer.
Automotive and Technology Presentation BY:. Tools we used for inspecting brake pads, measuring disc brakes, and bleeding the hydraulic clutch system.
课标人教实验版 高二 Module 6 Unit 3. Listening on workbook.
GLASS LAMINATING EVA INTERLAYER FILM FOR SAFEY GLASS BUILDING PROJECT
PHOTO EXPLAINING POLYVINYL BUTYRAL PVB FILM AND PVB LAMINATED GLASS IMPLICATION
Setting Priorities and Managing Time
Unit 1 Seminar Welcome to MM212! To resize your pods:
Expanding and Factoring Algebraic Expressions
Project Overview Introduction & Product Analysis
Two views Here are two views of the same shape made up of coloured cubes. How many cubes are there in the shape? What’s the minimum number? Maximum number?
Howto Visit China International Glass Indusry Technology Exposition
Creating a Technique Chart
How to Raise Children to Become Wise, Responsible, Godly Adults
AM Professional Lawn Services
Safety Problem (安全问题).
HEAT INVESTIGATION! By Brooklyn and Amelia. HEAT INVESTIGATION! By Brooklyn and Amelia.
English Proficiency Workshop
3.3: The Quadratic Formula
Unit 2 Heat and Temperature
The Need for Programming Languages
Unique Wedding Favor Boxes
Gatsby Movie Poster Visual Representation Project
Exam Technique.
Make Your Espresso Machine A Better Functioning One
High Frequency Words. High Frequency Words a about.
WHAT ARIZONA HOMEOWNERS NEED TO KNOW ABOUT SOLAR PANELS.
Microscope Basics.
Safety presentation for DNI
Arch205 building construction Windows- glazed curtain wall, skylights
Physical Change Phases of Matter
Plasma Cleaning Safety Presentation
Wrapping Anodes Back To Basics
Pinhole Camera.
Find Products to Sell on Amazon
What determines impedance ?
Winning at Math Series Set II Math Study Skills
Do Now(1) How many: Cm in 4 meters? Decimeters in 5 meters?
Relative Humidity Ms. Bankoff
CSCE 489- Problem Solving Programming Strategies Spring 2018
Sports and Entertainemnt Promotion
APPLIANCE REPAIR. TABLE OF CONTENTS  HOW TO REPAIR BIG APPLIANCES IN YOUR HOME HOW TO REPAIR BIG APPLIANCES IN YOUR HOME  FIXING YOUR REFRIGERATOR FIXING.
Topic Particle pictures, states of matter and melting points Level
SEMI Journal 3/26/17 Start a NEW set of journals. Define tournament.
Effective Presentation
Killer Project Management Best Practices
The of and to in is you that it he for was.
INTRODUCTION TO CERAMICS
D3 – Bellringer! If you forgot to fill out a permission form, call mom / dad right now, and have them fill it out!!! Open.
Some More Business Vocabulary and Interviews
Air WALT: to know some of the characteristics of air
Chemical Reactions Table of Contents Observing Chemical Change
Memory and Learning Our brains are often compared to computers in the way that we process information. We must: Encode, Store, then Retrieve info.
Factors Affecting Reaction Rate What does this really mean… “Things that speed up or slow down a reaction.”
Screen Printing.
NO BELLWORK Please sit at the next station (i.e. if you started at group 3, you sit at group 4) Most of us did very well yesterday. I expect the same.
Physical Change Phases of Matter
Help the Environment!.
Screen printing By: Cat Traynor.
Determination of Vacuum Pump Operational Efficiency
Gatsby Movie Poster Visual Representation Project
Cognitive Flexibility Hypertext Assignment March 20, 2002
Presentation transcript:

By peter shin cnc@cncnext.com/ benext77@gmail.com www.cncnext.com Analyse Bubbles of Laminated Glass with EVA Film Interlayer By peter shin cnc@cncnext.com/ benext77@gmail.com www.cncnext.com

What People May Think, When They Face Bubbles When some customers processing laminated glass with EVA FILM, bubbles appear inside the laminated glass, People would always think is this way: 1.The EVA Film I ordered last time, didn’t have bubbles problem, why this time the bubbles is coming out, that’s definitely the reason of the quality of EVA Film. 2. Some customers face this situation. Maybe they don’t use EVA Film very much, so they don’t finish the one roll of EVA FILM in a short period. They used two thirds of the roll of EVA film, and after several weeks, they go back to use the left part of the roll. But this time the bubbles coming out, they are very confused. How come the same roll has different quality? 3. Some customer may just change the new EVA FILM supplier and the bubbles comes out. Even their new supplyer tell them it’s all about the processing , they would not believe him, they would think it’s of course the problem of the quality of your EVA film, because my older supplier don’t have this bubbles problem.

General Reasons for Bubbles Many Laminated glass producer have misconception of the reasons of the bubbles problems. Here is the real why: 1. First situation: the temperature is too high, maybe more than 180 degree, which will cause the compound to break down and create gas. In this way, it’s just reducing your temperature, and everything would just be fine. 2. Second situation: the temperature in the oven is not average, which means some part of the glass, is hotter than others. So some part of the EVA film will melt and finish the crosslink reaction while other parts of EVA Film is still not melted, which will interrupt the vacuuming and cause the bubbles. For this situation, we suggest you modified the lamination machine. 3. Third situation: the Vacuum machine is old or the vacuum ability is not good enough. If the vacuum machine is old, renew it. If the vacuum ability is not powerful enough, try to buy a new one.

General Reasons for Bubbles 4. Four situation: the air moisture is high. The moisture in the air in your region is changed, which will easily cause the EVA film wet when it exposes in the air. Moisture in the EVA FILM would cause the bubbles. Although the EVA FILM is less sensitive to moisture compared with PVB FILM. But if the moisture is too high, the bubbles will also come out. Some customer open the packaged of one roll, and don’t use it up at one time. And the left part of the EVA film will absorb the moisture in the air and cause the bubbles. 5. Five Situation: Different EVA FILM supplier has different formula for EVA FILM, so if you change the EVA FILM supplier, you need to adjusting the processing parameters according to the supplier’s EVA FILM property.

Micro Reasons for Bubbles: I wrote an article Bubbles Solution for Laminated Class with EVA Film, talked about the situations that bubbles come out the laminated glass. It is macro views. Today I like to talk about the other reasons in micro views that cause the bubbles in laminating glass with EVA Film. 1. The plainness of the tempered glass is bad. 2. Check if the silicon bag is leaking. 3. It’s too early to put the laminating glass out of the oven, 4.It’s too early to stop the vacuuming.

1. The plainness of the tempered glass is bad. +As you known, tempered glass is less plain than the flat glass. So you should choose a company that produce better tempered glass. + Since the tempered glass’s plainness is worse than flat glass, you should use thicker EVA FILM interlayer for the tempered glass. Generally speaking, the tempered glass should be laminated with at least 0.8 mm thickness EVA Film Interlayer. + Laminate Less layers “pre- laminated glass” in a silicon bag at one time. If you laminate too many layers “pre-laminated glass” in a silicon bag at one time, the vacuuming would not work perfect and cause the bubbles. +If you laminated small pieces “pre-laminated glasses” at the same time, put the “pre –laminated glasses” on the fabric, which will help vacuum, and the fabric should cover the vacuum hole to make sure the vacuum hole is not sealed by the silicone bag itself.

2. Check if the silicon bag is leaking. 1) Averagely speaking, a silicon bag can be used for several years. But check the silicon bag if your laminated glasses have bubbles. 2) Check the concavo convex of the edge of the silicon bag is sealed perfectly when processing laminated glass with EVA Film.

2. It’s too early to put the laminating glass out of the oven, The temperature of laminated glass is still very high and the EVA FILM is still melting and reacting. When the laminated glass is getting cold, the melted EVA FILM is contracting, and the EVA Film can’t fully fill the gap between two glasses, so bubbles come out.

4.It’s too early to stop the vacuuming. And the cross link reaction of the EVA film is not totally finished and stable. And also the silicon bag would suck same air back in to the bag, which cause the bubbles. So generally speaking, don’t stop vacuuming until the temperature of the laminated glass is lower than 45 degrees. Notes:Always remember you put the wire net on the vacuuming hole to make sure the vacuuming is not stop by the laminated glass on the hole. To be more perfect, also can use wire net over the laminated glass.

Case Study: Bubbles of Laminated Glass with EVA Film Interlayer We have seen a situation in this way: Bubbles comes out in the Laminated Glass. And we checks all the details of vacuuming and vacuuming is definitely no problem. But the bubbles still comes out in the laminated glass. And the bubbles are regular and on lines. Finally we realized that the bubble lines are right upon the heating pipes. So we reduced the temperatures and did the test. Then no bubbles comes out, but some part of laminated glass is not very transparent. So we know the reason: Because the heating pipes are under silicon bag, when laminating glass, the part of laminated glass right upon the heating pipes are in higher temperature. And the temperature inside the oven is not in average. Remember that when the temperature is too high, the copolymer will be breaking up and produce gas which would cause bubbles inside laminated glass. So It's better of you can talk to the EVA Glass Lamination Oven producer to modify the oven.

All rights reserved by: China (Ethylene-vinyl acetate)EVA Interlayer Film Manufacturer for Safety Architectural Laminated Glass, Smart Glass, Privacy Glass, LED Glass etc. cnc@cncnext.com / www.cncnext.com eva@evafilms.com / www.evafilms.com benext77@gmail.com / benext77@hotmail.com Sponsored by: China Ucolin Glass Lamination Solution Experts: -Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy Glass Laminating -Silicone Rubber Sheet Manufacturer for Solar EVA Photovoltaic Panel Encapsulation (uc@ucolin.com / www.ucolin.com /umewe360@gmail.com/ umewe360@hotmail.com)

want to learn more, please go to THANK YOU FOR READING want to learn more, please go to ww.evafilm.com www.cncnext.com www.ucolin.com