HD-SDI COLOR IR LED CAMERA SPECIFICATIONS MEMO HD-SDI COLOR IR LED CAMERA 6.0mm Megapixel Fixed Lens / Built-In TDN Lens Sens-up ON / OFF (~ x8) Electronic Shutter Speed AUTO / FLK NTSC : 1/30~1/60,000sec PAL : 1/25~1/50,000sec Video Output Mode 1080P (1920x1080) 25P/30P Total Pixels 2010(H) x 1108(V) Effective Pixels 1944(H) x 1092(V) Image Sensor 1/3” 2.1Megapixel CMOS -10°C ~ +50°C Operating Temperature Less than 90% Operating Humidity 79.7(W) x 79.3(H) x 117.1(D)mm Dimension 54 pcs IR LED DC 12V (±10%) Power Supply LED Off : Max. 2.3W / LED On : Max. 7.5W Power Consumption More than 50dB S/N Ratio ON / OFF (16 Zone Selectable) Privacy Masking SDI-UL252IR Video Output Level Color : 0.5Lux (B/W : 0.1Lux / Sens-up x8 : 0.02Lux) Min. Illumination White Balance BLC / HLC / WDR / OFF Backlight Compensation ON / OFF D-WDR 0 ~ 20 AGC Approx. 794g (W/ Sunshield & Bracket) Weight Progressive Scan Scanning System MIRROR / D-ZOOM / FLIP D-Effect 720P / 720P CROP / 1080P Output Mode 1080P-25FPS / 30FPS , 720P CROP-50FPS / 60FPS Frame Rate English (Selectable) Language Built-in OSD OFF / LOW / MIDDLE / HIGH DNR Motion Detection HD-SDI / 1.0Vp-p (75Ω, Composite) NTSC/PAL (W/O WDR) AUTO / AUTOEXT / PRESET / MANUAL Defog AUTO / BW / COLOR / EXT (Selectable) Day & Night USER’S MANUAL SDI-UL252IR FEATURES • 1/3” Panasonic 2.1M Pixel Progressive Scan Color CMOS Sensor • 1944x1092@30fps • Video Out (BNC) with NTSC/PAL Selectable • Dual Output – Megapixel HD CCTV (BNC) and SD CCTV (BNC) out • Defog (Visibility Enhancement on the Low Contrast Scene) • Digital Zoom (x8) • Sens-up (x8) • Flicker Suppression • DNR (2D & 3D Noise Reduction) • DPC (Dead Pixel Compensation) • 2 Auto (AE/AWB) Control • HLC/BLC Support (High Light / Back Light Compensation) • 54pcs IR LED • 6.0mm Megapixel Fixed Lens • IP66 Weatherproof • Option : RS-485 / OSD Controller * In accordance with customers’ request and OSD controller’s option, the specifications can be fixed or changed without notice.

OSD CONTROL (Option- BOARD / CABLE) PRECAUTIONS NAME OF EACH PART DIMENSION • Do not install the camera in extreme temperature conditions. - Only use the camera under conditions where temperatures are between -10°Cand +50°C. Be especially careful to provide ventilation when operating under high temperatures. • Do not install or use the camera in an environment where the humidity is high. - It can cause the image quality to be poor. • Do not install the camera under unstable lighting conditions. - Severe lighting change or flicker can cause the camera to work improperly. • Never use the camera close to a gas or oil leak. - It can cause malfunctions to occur. • Do not disassemble the camera. - There are no user-serviceable parts inside it. • Do not touch the front lens of the camera. - It is one of the most important parts of the camera. Be careful not to be stained by fingerprint. • Never keep the camera face to strong light directly. - It can damage the image sensor. • Do not drop the camera or subject them to physical shocks. - It can cause malfunctions to occur. • Do not expose the camera to rain or spill beverage on it. - If it gets wet, wipe it dry immediately. Liquids can contain minerals that corrode the electronic components. • Do not expose the camera to radioactivity. - If exposed to radioactivity the image sensor will fail. * NOTE * • If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur. • Please check that the power satisfies the normal specification before connecting the camera. Bracket Sunshield Lens Sensor IR LED CABLE CONNECTION Power input (DC 12V) HD-SDI output Red : RS-485+ / Yellow : RS-485- White : Motion output / Black : GND (Option) OSD CONTROL (Option- BOARD / CABLE) Video loop-out OSD Controller UP DOWN R L a COMPOSITION a. SET : Displays the menu on the screen. Press this switch to confirm status or after changing a selected item. b. UP / DOWN : Used to move the cursor up or down in the menu screen to select a desired menu item. c. LEFT / RIGHT : Used to move the cursor left or right in the menu screen or to change the value of the selected item. Camera HD-SDI cable Power cable RS-485 cable (Option) Screw Manual