 Introduction  Maniks Sequential Controller  What is Maniks Sequential Controller  How it Works?  Benefits of Sequential Controller  Why Maniks Sequential Controller?  Applications  Specifications of Maniks Sequential Controller

 Maniks Sequential Controllers:

 What is Maniks Sequential Controller? Sequential controller is a key element of the valves used in the dust collector systems.Maniks Provides pilot valve used in dust collector system which are operated using sequential controller.Light emitting diodes (LEDs) are used to provide visual indication of which pilot valve is being charged as well as it gives "Power On" indication. The series of sequenced steps is customizable from 2 through 10.To adjust the length of time between valves being de-energized (Off time / Pulse Frequency) and the length of time that the valve is energized ( On time / Pulse Duration) controls are provided. All logic functions and timings are controlled by Silicon semiconductor componentsSequential controller

 How it Works?  The catalog SQP-1 Sequential Controller provides timed sequential energization of connected loads. When power is applied to the Controller, the "Power On" light emitting diode (LED) provides visual indication and pilot valve number 1 is immediately energized. "Output 1" LED provides visual indication of this event.  The pilot valve will remain energized for the length of time as indicated by the setting of the "Pulse Duration / on time" control. Note that the calibrated dials are for approximate settings only and if exact times are required, they must be measured.  .

 Pilot valve number 2 will automatically be energized at some time interval after pilot valve number 1 has been de- energized. This length of time will be as indicated by the setting of the "Pulse Frequency / off time" control, "Output 2” LED will provide visual indication that this event is occurring. The Controller will continue to sequentially energize the pilot valves until the power is removed Pilot valve

 Benefits of Sequential Controller  Cost efficient  High quality performance  Automatic control  Consumes low Time and Power  Ease of installation and maintenance  Good flow characteristics 

 Why Maniks Sequential Controller?  A variety of manufacturers make dust collector valve, cylinders, and other auto-mation components that control the flow of compressed air through industrial dust collector systems. Performance and cost-effectiveness are essential in all such systems.   The critical difference in MANIKS sequential controller & other is its unique combination of quality, performance, and value with quick shipment of standard components as well as consistent technical support and service for easy assembly, reliable operation, and efficient maintenance.MANIKS

 Applications  If you have take a look we are a leading supplier to engineering contractors and to end users of sequential controller in a wide range of industries since few decades. Our high quality dust collectors have wide range of application some are listed below  Lime and cement processing  Grain, agriculture, and feed  Metalworking (welding, grinding, cutting...)  Food processing  Heavy industries (iron, steel...)  Pharmaceutical (Powder...)  Power engineering (coal-fired power plants)  Wood machining

 Specifications of Maniks Sequential  Supply Voltage Input Fuse  230VAC 1.5A  24VDC 3A  110VAC 3A  Pulse Frequency / Range Adjustability : Standard : 2 to 60 seconds  Special Requirements: 1) 4 to 120 seconds  2) 6 to 180 seconds  Pulse Duration / Range Adjustability: 20 to 200 milliseconds  Operating Temperature Range : 00C to 500C  Repetitive Accuracy on Time Sequence : ± 5%