Nuestra reunión con ÉL 2 Tesalonicenses 4ta parte Octubre 22, 2017 CARTA A LOS ROMANOS CARTA A LOS TESALONICENSES 2 Tesalonicenses 4ta parte Octubre 22, 2017 Matias Pedroza 2da Venida Nuestra reunión con ÉL

Existe una controversia acerca de la fecha de redacción de la carta, algunos piensan que estas 2 cartas fueron las primeras que Pablo escribió, y otros teólogos afirman que fue Gálatas. De cualquier manera podemos ver cuales eran sus urgencias en la enseñanza . Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

1Tesalonicenses fue escrita probablemente 3 meses después de ser fundada la Iglesia por Pablo, y 2 Tesalonicenses entre 5 semanas a 6 meses después de haber sido escrita la primera. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

2 Tesalonicenses continúa desarrollando los temas escatológicos de I Tesalonicenses Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

La escatología estudia el destino final del individuo y el universo, así como estudia al ser humano después de la muerte.  Se identifica con los siguientes momentos: muerte, juicio, cielo e infierno. La escatología cristiana es considerada una doctrina que estudia todas las cosas que sucedieron antes y después del Juicio Final, el fin de la especie humana en el planeta tierra y su futuro eterno. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

quien nos libra de la ira venidera I Tesalonicenses 1:9-10 Tito 2:13 …aguardando la esperanza bienaventurada y la manifestación gloriosa de nuestro gran Dios y Salvador Jesucristo… Recibisteis Convertisteis Servisteis Esperasteis de los cielos a su Hijo, el cual resucitó de los muertos a Jesús , quien nos libra de la ira venidera Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

La ira venidera Sofonías 1:2-4, 15;3:8 Isaías 13:9-14,61:1-4 Mateo 3:7,13-40 Juan 3:36 Apocalipsis 6:16-17 Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Salvos de la ira venidera Romanos 5:9 Lucas 21:36 1 Tesalonicenses 1:10 , 4: 17,5:9 Apocalipsis 3:10 Isaías 57:1 1 Corintios 15:51 Enoc,Noé, Lot, Elías Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

…no os entristezcáis como los otros que no tiene esperanza… Daniel 12: 1-3 1 Corintios 15:51-58 Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Elpis (ἐλπίς G1680) en el NT Esperanza Esperanza favorable y confiada Esperanza describe: (a) la feliz espera del bien (b) la base sobre la que descansa la esperanza (c) el objeto sobre el que se fija la esperanza Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Señales que nos advierten Sera como los días de Sodoma y Gomorra Lucas 17:28 La ciencia aumentará Daniel 12:4 Como en los días de Noé Mateo 24:37-42 Falsos profetas Mateo 24:11-13 Habrá pestes Mateo 24:7 Habrá hambre Mateo 24:63 Se levantará nación contra nación y habrá rumores de guerra Mateo 24:6 Habrá terremotos Mateo 24:6-7 Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

La gran apostasía 2 Tesalonicenses 2:3 ἀποστασία apostasía: deserción de la verdad De Cristo os desligasteis, los que por la ley os justificáis; de la gracia habéis caído Gálatas 5:4 Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Quienes no se van y quienes nos vamos Todo aquel que no haya aceptado a Cristo como su salvador. Juan 3:18 Los que fueron creyentes en Cristo y se echaron atrás. Mateo 24:13 Los apostatas de fe. Estos son los que habiendo creído a la verdad se cambiaron a otra fe. 1 Timoteo 4:1 Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Los cristianos que no están firmes, los tibios y los que practican el pecado aun estando en la iglesia. Los que viven una religión pero no viven a Cristo Apocalipsis 3:15-16 Los que se cansaron de esperar y dicen “ya van 2,000 años y no ha llegado” 2 Pedro 3:3-18 Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Existen 162 referencias que advierten del infierno en la Biblia 70 de estas las mencionó Jesús Lucas 12:5 Pero os enseñaré a quién debéis temer: Temed a aquel que después de haber quitado la vida, tiene poder de echar en el infierno; sí, os digo, a éste temed.

2 Tesalonicenses:2:1-12 12 a fin de que sean condenados todos los que no creyeron a la verdad, sino que se complacieron en la injusticia.

(2:13-17) Pero nosotros debemos dar siempre gracias a Dios respecto a vosotros, hermanos amados por el Señor, de que Dios os haya escogido desde el principio para salvación, mediante la santificación por el Espíritu y la fe en la verdad, a lo cual os llamó mediante nuestro evangelio, para alcanzar la gloria de nuestro Señor Jesucristo. Así que, hermanos, estad firmes, y retened la doctrina que habéis aprendido, sea por palabra, o por carta nuestra. Y el mismo Jesucristo Señor nuestro, y Dios nuestro Padre, el cual nos amó y nos dio consolación eterna y buena esperanza por gracia, conforte vuestros corazones, y os confirme en toda buena palabra y obra. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Estar firmes, y retened la Doctrina (2:13-17) Debemos siempre dar gracias a Dios por su elección de salvarnos Seremos salvos mediante la fe en la verdad Nos amó y nos dio consolación eterna y buena esperanza por gracia Os confirme en toda buena palabra y obra Llamado Jesús puso a disposición la salvación Respuesta verdad => Jesús Por fe alcanzamos esa salvación Bendición Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%. La salvación es un regalo de Dios Esperanza confirme Στηρίζω sterízo fijar firmemente

El evangelista de Dios siempre va a tener mucha oposición Pablo pide oración Para que el evangelismo no cese para la gloria de Dios Por liberación de los “hombres perversos y malos” (los que no tienen fe) 3:1-2 Tenemos que tener un deseo de que lo que recibimos, otros también lo reciban Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%. El evangelista de Dios siempre va a tener mucha oposición 1 Tesalonicenses 2:2

Pero fiel es el Señor, que os afirmará y guardará del mal. 3:3-4 Pero fiel es el Señor, que os afirmará y guardará del mal. Y tenemos confianza respecto a vosotros en el Señor, en que hacéis y haréis lo que os hemos mandado. Efesios 6:18 Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%. orad por nosotros

3:5 ? Y el Señor encamine vuestros corazones al amor de Dios, y a la paciencia de Cristo. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Mi meta (Basic) Half-circle picture with accent arcs To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Meta de Dios para mi (Basic) Half-circle picture with accent arcs To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%. Meta de Dios para mi

Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

3:5 ? Y el Señor encamine vuestros corazones al amor de Dios, y a la paciencia de Cristo. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

3:6-14 Pero os ordenamos, hermanos, en el nombre de nuestro Señor Jesucristo, que os apartéis de todo hermano que ande desordenadamente, y no según la enseñanza que recibisteis de nosotros. Porque vosotros mismos sabéis de qué manera debéis imitarnos; pues nosotros no anduvimos desordenadamente entre vosotros, ni comimos de balde el pan de nadie, sino que trabajamos con afán y fatiga día y noche, para no ser gravosos a ninguno de vosotros; no porque no tuviésemos derecho, sino por daros nosotros mismos un ejemplo para que nos imitaseis. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

3:6-14 Porque también cuando estábamos con vosotros, os ordenábamos esto: Si alguno no quiere trabajar, tampoco coma. Porque oímos que algunos de entre vosotros andan desordenadamente, no trabajando en nada, sino entremetiéndose en lo ajeno. A los tales mandamos y exhortamos por nuestro Señor Jesucristo, que trabajando sosegadamente, coman su propio pan. Y vosotros, hermanos, no os canséis de hacer bien. Si alguno no obedece a lo que decimos por medio de esta carta, a ése señaladlo, y no os juntéis con él, para que se avergüence. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Vivir en forma coherente con el evangelio 3:6-14 Vivir en forma coherente con el evangelio Que os apartéis de todo hermano que ande desordenadamente, no trabajando en nada, sino entremetiéndose en lo ajeno 1 Timoteo 5:13 si alguno no quiere trabajar, tampoco coma. no ser gravosos Si alguno no obedece a lo que decimos a ése señaladlo, y no os juntéis con él Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Vivir en forma coherente con el evangelio 3:6-14 Vivir en forma coherente con el evangelio El que espera la pronta llegada de su Señor, debe estar trabajando como manda su Señor Sabéis de qué manera debéis imitarnos μιμέομαι miméomai mímos Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

3:6-14 Vivir en forma coherente con el evangelio El que espera la pronta llegada de su Señor, debe estar trabajando como manda su Señor Sabéis de qué manera debéis imitarnos 1 Cor 11:1, Fil 3:17, Hebreos 13:7 3Jn 1:11 Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%. Amado, no imites lo malo, sino lo bueno. El que hace lo bueno es de Dios; pero el que hace lo malo, no ha visto a Dios.

Vivir en forma coherente con el evangelio 3:6-14 Vivir en forma coherente con el evangelio El que espera la pronta llegada de su Señor, debe estar trabajando como manda su Señor Sabéis de qué manera debéis imitarnos No anduvimos desordenadamente entre vosotros Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%. 2 Corintios 12:20 …que haya entre vosotros contiendas, envidias, iras, divisiones, maledicencias, murmuraciones, soberbias, desórdenes;

Vivir en forma coherente con el evangelio 3:6-14 Vivir en forma coherente con el evangelio El que espera la pronta llegada de su Señor, debe estar trabajando como manda su Señor Sabéis de qué manera debéis imitarnos No anduvimos desordenadamente entre vosotros Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Vivir en forma coherente con el evangelio 3:6-14 Vivir en forma coherente con el evangelio El que espera la pronta llegada de su Señor, debe estar trabajando como manda su Señor Sabéis de qué manera debéis imitarnos No anduvimos desordenadamente entre vosotros Trabajamos con afán y fatiga día y noche No os canséis de hacer bien. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%. 2 Corintios 6:3-5

Vivir en forma coherente con el evangelio 3:6-14 Vivir en forma coherente con el evangelio El que espera la pronta llegada de su Señor, debe estar trabajando como manda su Señor Sabéis de qué manera debéis imitarnos No anduvimos desordenadamente entre vosotros Trabajamos con afán y fatiga día y noche No os canséis de hacer bien. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%. ἐκκακέω ekkakéo desmayar, debilitar, “DESCORAZONARSE”

15 Mas no lo tengáis por “enemigo”, sino amonestadle como a “hermano”. Vivir en forma coherente con el evangelio Que os apartéis de todo “hermano” que ande desordenadamente 15 Mas no lo tengáis por “enemigo”, sino amonestadle como a “hermano”. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

15 Mas no lo tengáis por “enemigo”, sino amonestadle como a “hermano”. Vivir en forma coherente con el evangelio 15 Mas no lo tengáis por “enemigo”, sino amonestadle como a “hermano”. νουθετέω noudsetéo poner en la mente, advertir o regañar gentilmente: exhortar, amonestar. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.

Paz, presencia y gracia de Jesús Deseo de Pablo para con sus amados Paz, presencia y gracia de Jesús 16 Y el mismo Señor de paz os dé siempre paz en toda manera. El Señor sea con todos vosotros. 18 La gracia de nuestro Señor Jesucristo sea con todos vosotros. Amén. Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. On the Home tab, in the Slides group, click Layout, and then click Blank. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Drag the right yellow diamond adjustment handle to the bottom of the slide to create a half-circle. In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, in the Fill pane, under Insert from, select Tile picture as texture. In the Insert Picture dialog box, select a picture, and then click Insert. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane: In the Blur box, enter 20 pt. In the Transparency box, enter 70%. Click the button next to Presets, and then under Inner click Inside Diagonal Top Right (first row, third option from the left). Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: In the Distance box, enter 20 pt. Click Align Middle. Click Align to Slide. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Width box, enter 10.03”. In the Shape Height box, enter 6.79”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. In the Transparency box, enter 50%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. In the Shape Height box, enter 6.86”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Shape Width box, enter 9.98”. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Select the first stop in the slider, and then do the following: In the Transparency box, enter 77%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. Click Align Left. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until four stops appear in the slider In the Angle box, enter 270⁰. Click the button next to Direction, and then click Linear Up (second row, second option from the left). Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Position box, enter 30%. Select the third stop in the slider, and then do the following: Select the fourth stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 70%.