Specification of Control Board Model Name : FCB203WUT Revision 1.0 RoHS Compliant Copyright ⓒ 2012 FlatGate Co., Ltd All Rights Reserved.

CONTENTS 1. Features -------------------------------------------------------------------------------- 3 2. General Description ---------------------------------------------------------------- 3 3. Block Diagram ----------------------------------------------------------------------- 4 4. Dimension ------------------------------------------------------------------------- 5~6 5. Pin Information ------------------------------------------------------------------ 7~8 6. Reference Data ----------------------------------------------------------------------- 9 7. Setup for Operation (OSD) ------------------------------------------------------- 10 8. Firmware Version Change ------------------------------------------------------ 11 9. Panel Tuning ------------------------------------------------------------------- 11  

1. FEATURES 2. GENERNAL DESCRIPTION • State of the art high performance picture quality and low cost design • Analog RGB, DVI(option) • Full CRT multi-sync monitor compatibility • Multi-sync capability up to Full-HD resolution @ 60Hz,compatible standard DOS, VGA,SVGA , XGA and SXGA VESA timing • Expand DOS, VGA, SVGA and XGA to full screen display • True color(16.7M) data processing and display driving • Single control operated On-Screen-Display(hereafter “OSD”) user interface • Full control of all relevant display and interface parameters via OSD Multi language support • VESA DDC 1/2B compliant • Compatible with VESA DPMS power saving modes • Small form factor: 110 x 100 mm • +12V/3A DC Single Power: 36 watts AC/DC power adapter recommended • Operating temperature: 0 to 65℃ 2. GENERNAL DESCRIPTION This FCB203WUT( TTL, LVDS Version ) board is an advanced TFT-LCD Monitor Control Board, which enables a full replacement of conventional CRT monitor with a large size Active Matrix LCD module. This board, a single layer circuit board, is suitable for video resolution up to Full HD @ 60Hz in all video modes and the display area of the module is fully used. As this model is designed to act as a full monitor interface and to support various TFT-LCDs under the Full HD resolution by BIOS option, the customers can line up their monitors with their own identity. Besides the main function of analog/digital converting in this board the various appealing On-Screen-Display Menu layout is also possible upon customer’s request.

3. BLOCK DIAGRAM Scaler NT68xxxUFG DC-DC Converter OSD Control +5V Analog RGB DVI (option) TFT LCD Module Inverter LCD Power LVDS Signal +12V

4. DIMENSION 4.1 Main Board Dimension (110 X 100 X 1.6 mm) ※ Option ( DVI )

4.2 OSD Board Dimension (109 X 21 X 1.6 mm)

5. PIN INFORMATION 5. 1 Pin Connectors 5.1.1 LCD I/F (CN301) for LVDS Single output Pin No. Function 1 NC 6 CLK+ 11 GND 16 YP0- 2 7 CLK- 12 YP1+ 17 3 YP3+ 8 13 YP1- 18 4 YP3- 9 YP2+ 14 19 VCC 5 10 YP2- 15 YP0+ 20 5.1.2 LCD I/F (CN403) for LVDS Dual output Pin No. Function 1 VCC 9 RXE3- 17 GND 25 RXO2+ 2 10 RXEC+ 18 RXE0+ 26 RXO2- 3 11 RXEC- 19 RXE0- 27 RXO1+ 4 NC 12 RXE2+ 20 RXO3+ 28 RXO1- 5 DE 13 RXE2- 21 RXO3- 29 RXO0+ 6 14 22 RXOC+ 30 7 15 RXE1+ 23 RXOC- 8 RXE3+ 16 RXE1- 24 5.1.3 VGA Input (J103) Pin No. Function 1 RED 5 Check Signal 9 NC 13 HSYNC 2 GREEN 6 GND 10 14 VSYNC 3 BLUE 7 11 15 DDC_SCL 4 8 12 DDC_SDA 5.1.4 LCD I/F (JP1) for TTL output Pin No. Function 1 ROT 11 B5 21 G5 31 R5 2 CLK 12 B4 22 G4 32 R4 3 MIRR 13 GND 23 33 4 DE 14 B3 24 G3 34 R3 5 15 B2 25 G2 35 R2 6 Vsync 16 B1 26 G1 36 R1 7 17 B0 27 G0 37 R0 8 Hsync 18 28 38 Vcc 9 B7 19 G7 29 R7 39 10 B6 20 G6 30 R6 40

5.1.12 Touch I/F (CN104) : JP101 Select 5V or 12V 5.1.5 VGA Input (CN106) Pin No. Function 1 HSYNC 5 BLUE 9 RED 13 GND 2 6 10 3 VSYNC 7 GREEN 11 DDC_SCL 4 NC 8 12 DDC_SDA 5.1.6 DVI Input (CN102) Pin No. Function 1 DATA2- 7 DDC SDA 13 DATA3+ 19 GND 2 DATA2+ 8 NC 14 +5V 20 DATA5- 3 9 DATA1- 15 21 DATA5+ 4 DATA4- 10 DATA1+ 16 HPD 22 5 DATA4+ 11 17 DATA0- 23 CLOCK- 6 DDC SCL 12 DATA3- 18 DATA0+ 24 CLOCK+ 5.1.7 DVI Input (CN304) Pin No. Function 1 DATA R+ 6 GND 11 CLOCK- 16 2 DATA R- 7 DATA B+ 12 17 +5V 3 8 DATA B- 13 DDC SCL 18 HPD 4 DATA G+ 9 14 SYNC DET 19 5 DATA G- 10 CLOCK+ 15 DDC SDA 20 5.1.8 DC IN (J101) Pin No. Function 1 GND 2 12V 3 5.1.9 DC IN (CN101) Pin No. Function 1 12V 2 5V 3 GND 5.1.10 OSD I/F (CN10) Pin No. Function 1 Menu 4 Up 7 LED_RED 10 ( Volume ) 2 Select 5 GND 8 Power 11 ( IR ) 3 Down 6 LED_GRN 9 ( Source ) 12 ( +5V ) 5.1.11 Inverter I/F (J106) Pin No. Function 1 12V 3 GND 5 Backlight On/Off 2 4 6 Dim ADJ. 5.1.12 Touch I/F (CN104) : JP101 Select 5V or 12V Pin No. Function 1 Vcc 2 GND 3

6. REFERENCE DATA 6.1 Limited Values 6.2 Features Symbol Description Min Max Unit VDD +12V DC Power supply 11.4 12.6 V IDD Input current +3.0 A Vi(RGB) Video input signal -0.3 +1.0 6.2 Features Parameter Value Unit Overall dimensions Width 110 mm Height 100 Max. output resolution 1920 dots x 1080 lines Data processing 8 x 3[R,G,B] Bits Input impedance 75 Ohm Video - Sync Sync polarities +/- Sync levels 5.0 V Supply voltage 12.0 Max. number of colors 16.2M Colors Operating temperature 0~65 °C Storage temperature -20 ~70 Max.weight T.B.D

7. Setup for Operation The OSD (On Screen Display) provides certain functions to have clear image and others. The control functions defined on OSD operation are as below. 7.1 Functions on OSD Menu OSD Menu Description Display Brightnes Contrast Clock Phase H Position V Position Sharpness Adjust the brightness of the screen Adjust the contrast of the screen Adjust the horizontal size of the screen's image Adjust the focus of the screen's image Adjust the horizontal position of the screen's image Adjust the vertical position of the screen's image Adjust the sharpness of the screen's image Audio Volume Mute Adjust volume Adjust mute on/off Color 9300 7500 6500 User Red Green Blue 9300, 7500 and 6500 Temperature and user Temperature, Red, Green & Blue Language Select one of the nine language OSD OSD Time Out OSD Position Transparen Auto Setting Recall Adjust the display time of osd Adjust the position of osd Adjust the transparency of osd Automatically adjust the Horizontal position, Vertical position, Horizontal size, and Phase Window's background or characters should be displayed on your Full screen prior to proceed this function. Initialize to default value Source Analog DVI Select input source one of Analog and DVI. Misc Light Enable Light Contrast Light Bright Light H Start Light H Width Light V Start Light V Width This function is used when highlight special area. Enable or disable the Light window. Adjust the contrast of the Light window. Adjust the bright of the Light window. Adjust the horizontal position of the Light window. Adjust the horizontal size of the Light window. Adjust the vertical position of the Light window. Adjust the vertical size of the Light window.

8. Firmware Version Change The table below shows the model names of LCD panel, LCD power, No. Firmware Version Note 01 V1.00 Reference Firmware 9. Panel Tuning The table below shows the Data, LCD Name, LCD power, Inverter, Resolution, No. Date Panel Name Power Inverter Resolution Note 01 2012.05.21 LM150X08 3.3V FIF1521-31B 1024x768 02 LM190E08 5V 0150LG-75-2P 1280x1024 03 LM201U04 12V 1309WB-12V 1600x1200 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27