Manufactured by maniks

About us Maniks are the leading supplier of mechanical as well as electromechanical devices since past thirty years. They have proven their importance to design a quality products supply. Maniks is a very popular brand who manufactures stop valves with best quality and service.

 Introduction :  What is Regulating Valve  Maniks Regulating Valve  Features of Maniks control valve (Regulating valve)  Technical Specifications of a Maniks Regulating Valve  Advantages of Regulating Valve:  Applications:

 Maniks Regulating Valve:

 What is Regulating Valve? Regulating valve Regulating valve is an actuator used to control the flow of liquid or gas. It can also be used to regulate temperature as well as pressure. Regulatory valves have wide range of application in refrigeration and air-conditioning plant. It is been utilized for capacity regulation, crankcase pressure regulation, receiver pressure regulation, evaporation pressure regulation and condensing pressure regulation.

 Maniks Regulating Valve:  Maniks regulating valve is specially designed to use in refrigeration application. It is constructed to withstand in a high internal pressure. However, the piping system in general should be designed to avoid liquid traps and reduce the risk of hydraulic pressure caused by thermal expansion. Maniks  These valves are designed to meet the strict quality requirements on refrigerating installations specified by the international classification societies and are carefully designed to present favorable flow conditions and accurate linear characteristics.

 Features of Maniks control valve (Regulating valve)  Connections:  Butt-weld DIN (EN 10220) – DN (3/8 - 2½ in.)  Butt-weld ANSI (B Schedule 80) – DN (3/8 - 1½ in.)  Butt-weld ANSI (B Schedule 40) – DN (2 - 2½ in.)  Socket weld (ANSI B 16.11) – DN (½ - 1½ in.)  FPT inside pipe thread, NPT (ANSI/ASME B ) – DN (½ - 1¼ in.)  Housing:  Housing is Standard MSVA angle-way or straight-way housing allowing other inserts from the MSVL platform to be installed.  Material is special, cold resistant steel

 Technical Specifications of a Maniks Regulating Valve:  Refrigerants Applicable to HCFC, HFC, R717 (Ammonia) and R744 (CO2). Can be used in chemical and petro-chemical applications.  Temperature range –60/+150°C (–76/+302°F)  Max working pressure 52 bar g (754 psi g)  Flow coefficients for fully opened valves from Kv = 0.15 to 80 m3/h (Cv = 0.17 to 92.5 USgal/ min).

 Advantages of Regulating Valve:  Provides best quality product  Cost efficient  Assures better performance for long life  Requires less maintenance

 Applications:  Regulating valves have wide range of applications some of them are listed below  Cooking  Air Compressors  Gas powered vehicles  Mining industries  Oil and gas industry  LP gas applications 