MacDermid Canning Plc. TRANSOCEAN Marston Bentley Div. Tom McKechnie Simon McManus

Offshore Fluids Presentation MacDermid Canning Production Control Fluids Exploration Control Fluids Motion Compensator Fluids

MacDermid Canning B.S.I. Registered to ISO 9001 and ISO 15001 for manufacture, delivery and research. Facilities include the QC lab, R&D lab, Fluids test lab and Hydraulic test lab.

MacDermid Canning Ltd Manufacturing sites in Wigan, England and Houston Texas. Storage in Aberdeen, Great Yarmouth, Bergen, Stavanger, Port Elizabeth S. Africa, Rio De Janeiro, Singapore and Perth Australia.

Subsea Control Fluids Water and oil based control fluids Oceanic world leading product range. High temperature fluids available All with low viscosity, lubrication, biocidal and anti-corrosion properties

Exploration Products BOP control fluid concentrates. Motion Compensator Hydraulic Fluids Drilling Mud Additives

Erifon HD 856 100:1 BOP Fluid Concentrate. Workhorse of the industry for over 15 years Used by all major drilling contractors and equipment suppliers Excellent track record Market leader world-wide

Erifon HD603 Again it has all the properties in Erifon HD856 Developed to meet current and future environmental regulations Has been tested by major valve manufacturer and approved for use in their systems.

Erifon HD603 HP Again it has all the properties in Erifon HD856 Developed to provide extra lubrication and meet future environmental regulations Has been tested by major valve manufacturer and approved for use in their systems.

Falex Lubricant Test

Erifon 603 Falex Testing No wear after 30min @ 500lb & 1%mix

Erifon HD603 Falex Testing

Galvanic Corrosion Testing

Environmental Testing FULL HOCNF INFORMATION AVAILABLE IN LINE WITH PARCOM ON ALL ERIFON PRODUCTS. ERIFON HD603 IS THE LEAST TOXIC BOP FLUID KNOWN. SFT AND THE DTI THROUGH THE OCNS ALLOWS DISCHARGE OF ALL THE OCEANIC FLUIDS.

Erifon Pilot Line Fluid Developed to prevent poor water and mixing damaging the pilot line system Ready to use Increases reliability

BOP EQUIPMENT MANUFACTURERS MacDermid Canning are currently working with: Cameron Varco Shafer Hydril

Erifon 818 Motion Compensator Fluid. Market leader for over 15 years First water-based fluid to replace old phosphate ester fluids excellent track record

Vapour Phase Corrosion Testing Carbon steel plates placed over the fluid at 60°C for 1 hour

Vapour Phase Corrosion Testing COMPETITOR ERIFON 818

Compression Ignition of Compensator fluids HSE recommended test carried out by Bundesantalt Fur Materialprufung Germany. Erifon 818/Compenol was the first fluid tested and was approved by the International Association of Drilling Contractors in 1986

Compression Ignition of Compensator fluids Sample injection High pressure air Heating coils

Compression Ignition of Compensator fluids Silicone Oil and Phosphate Ester fluids ignited at the above temperatures after less than 1 second exposure. Erifon 818/Compenol did not ignite even after 180 seconds

Erifon 818L Low viscosity version of Standard Erifon 818 Developed in conjunction with a major motion compensator manufacturer. For use in cold climates

Erifon 818TLP Added high pressure lubrication for Tension Leg Platforms Required due to higher loads and different types of motion Developed in conjunction with a major motion compensator manufacturer