Identifying Saginaw Power Steering Pumps BAB Steering Identifying Saginaw Power Steering Pumps BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

What You Need to Know There is no parts book that will identify the steering pump on any given vehicle. The part number however is stamped on some steering pumps. This presentation will show you how to locate that part number and help you identify the correct pump without a part number It is imperative that you use the correct pump because over 75% of the steering problem you encounter are caused by not using the correct pump. BAB is the only re-manufacturer with more than one location. BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

Important Information The Saginaw Power Steering Pump comes in three different part numbers. Each pump initially looks identical to the other two. This presentation will help you identify and distinguish the differences between these three pumps. These Saginaw pumps are belt driven BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

Saginaw Big Bearing All Saginaw Big Bearing Pumps are 5 3/8“ in diameter. With a bearing housing diameter of 2.1" BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

Saginaw Big Bearing 5 3/8" All Saginaw Big Bearing Pumps are 5 3/8“ in diameter. With a bearing housing diameter of 2.1" 2.1" BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

Saginaw Big Bearing The difference between the two big bearing pumps is the location of the threaded bolt hole used to adjust the belt tension. BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

Saginaw Big Bearing 3/4″ or 1″ One is 3/4″ the other 1″ from the end of the housing BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

Saginaw Big Bearing 3/4″ When 3/4″ from the center of the bolt hole to the end of the housing use BAB Part # SP201X This pump fits Chevy/GMC/IHC OEM # 7812808 BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

Saginaw Big Bearing 1″ When 1″ from the center of the bolt hole to the end of the housing use BAB Part # SP202X This pump fits Chevy/GMC/IHC OEM # 5692687 BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

Saginaw Bushing Type 5 3/8" The Saginaw Bushing Pump is also 5 3/8“ in diameter. With a bushing housing diameter of 1.6" 1.6" BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

Saginaw Bushing Type This bushing type pump fits Chevy/GMC OEM # 568074 BAB # SP203X BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved

Need Assistance If you need assistance identifying a gear or wish to check availability please call the order desk 800-783-5222 NOTE: You will get a person. We do NOT use an answering service. BAB Steering Hydraulics, Inc. Copyright © 2017 All Rights Reserved