Click the " New Job "

3. Click " Save " 1. Select Material 2. Select Machine

Click the " Import. STL files "

2. Click " Open " 1. Select Type Object

Tip. If you want, you can click here to check the STL file.

Click the " Select Machining Stratigies "

1. Select Machining Stratigies 2. Click " Open "

Tip. Always click " OK "

Click the " Select or Create Stock / Blank "

1. Select Stock / Blank directory 2. Click " Open "

1. Select Implant System Tip. Be sure to check the designed implant system. 2. Click " Open "

Tip. Be sure to import the blank and check the hex position.

Tip. Parallel relationship for check the hex position.

Tip. Click the " Modified Offset / Part Border values "

1. Click Abutment 2. Click " End Selection "

Changed to " 2.5mm " 4.4mm 2. Click " OK "

2.5mm Tip. Since the offset value is reduced, the total milling time is also reduced.

Click the " Start Calculation for Machining "

Click "OK "

Tool path computing…

1. Add the file name to easily find " NC-data " [Patient name/Tooth number/ Other information] 2. Click "OK"

Click " Yes "