Replacement Elements for Baghouse and Cartridge Collectors Dura-PleatTM Replacement Elements for Baghouse and Cartridge Collectors > Press spacebar to advance each slide, or ESC to stop the presentation.

In the beginning... >

Well, not all that long ago… A lot of folks thought the cartridge type dust collector would replace the pulse jet bag house -- >

Because: Bag house is: Cartridge is: too difficult to service too tall Dura-Pleat Because: Bag house is: too difficult to service too tall too high on energy demand not very efficient too expensive to install Cartridge is: easy to service much shorter low on energy demand very efficient >

But the Cartridge collector was not able to handle many of Dura-Pleat But the Cartridge collector was not able to handle many of the “tough” applications, like: High temperature Very high dust concentration Oily presence in challenge dust >

…and you can guess the rest… The Cartridge collector did not replace the bag house! >

problem applications But the still existed! High temperature Very high dust concentration Oily presence in challenge dust and a lot more as well…... >

A SOLUTION was still needed! >

What appeared in the market place was a new media -- initially for Cartridge elements -- that was also applicable to the bag house... 100% spun bond polyester. >

The cartridge survived. Bottom line? The bag house survived. The cartridge survived. Result?: the hybrid bag house. >

Welcome to the Dura-PleatTM element - for replacement & Ramtube© collectors... The hybrid bag house use elements quite similar to the cartridge dust collector: Cartridge: ~12” dia x 20”-39” long Hybrid element: 4”-6” dia x 21”-80”+ long >

Dura-PleatTM hybrid features: Retro-fit to existing; no change to housing New-fit to shorter housing One piece design, integral bag+cage; reduced install/service time Filter surface area increased 2-3 times; lower a/m ratio Resilient urethane top ensures superior fit; air tight seal Specialty finishes available; PTFE, static dissipation, oil/water repellant Surface filtration reduces operating pressure; lower energy demand [Hp] >

Dura-PleatTM hybrid features: Less compressed air to pulse than conventional bag Shorter length keep media out of inlet gas stream; reduces chance of abrasion Shorter length + shorter housing has cost advantage; fits constrained spaces, enables max flow in smaller housing, reduced shipping cost Media is 100% spun bond polyester with 99.99% efficiency; emissions reduced by half of standard polyester media Dura-PleatTM will operate at 1800 F continuous; 3500 F with special media Plus all the better features & benefits of the conventional bag house! >

Dura-Pleat >

Dura-Pleat >

Dura-Pleat >

Dura-Pleat >

Dura-Pleat >

Dura-Pleat >

Dura-Pleat >

Dura-PleatTM Filter Benefits: Meets widest range of tough application challenges -- handles difficult dust Provides easy-to-install replacement for bag or cartridge filters Improves performance of older collectors -- simply drops in with no modifications required Allows downsizing of new collectors; saves floor space Achieves lowest emissions Washable media may reused in many applications Exceptionally rugged, long lasting Standard configuration is non-metallic for ease of disposal or incineration Reduces downtime for lower maintenance and change-out costs Often pays for itself in enhanced performance and longer service life! >

Dura-Pleat >

Dura-Pleat >

Dura-Pleat >

Dura-Pleat >

Thank You