Your ESD Flooring Solution Provider VERSION 02-2018

Who is Statguard Flooring? Statguard Flooring is a division of Desco Industries. We have a full line of ESD Flooring solutions that meet the recommended technical flooring requirements of ANSI/ESD S20.20-2014. Our full line of flooring products includes: 8400 Series ESD Vinyl Floor Tile and Conductive Adhesive Statguard® Conductive Epoxy and Acrylic Paint Statguard® Dissipative Floor Finish and ESD Floor Maintenance Products Conductive Rubber Tiles and Rolls Dissipative Modular Carpet Tiles

Applications Statguard Flooring products are designed for areas that require static control, such as: ESD Electronic Assembly and Manufacturing areas ESD Testing and R & D Labs Computer Rooms, Control Rooms, and Main Frame Areas 911 Call Center and Communication Areas FAA Air Traffic Control Towers, TRACON, and Radar Surveillance Areas Telecommunication facilities Hospital diagnostic units

Trusted by Leading Companies Our growing list of customers who have purchased our ESD floor covering for permanently safeguarding their ESD problems include: Boeing Jabil Raytheon Keysight Alchem Surmotech QSR Automation Omron Teledyne US Navy Jabil Rorer Management

Floor Care Products Made in USA We take pride in manufacturing our products right here in the United States of America We offer tours at our facility in Canton, Massachusetts

What is ESD? Many common materials tribocharge Electrostatic charge generation: When two surfaces are in contact then separate One surface has positive charge and one surface has negative charge Personnel can generate a charge by walking on a non ESD floor

What is ESD? Large charges generated all the time Walking across a carpet: 1,500 – 35,000 volts Walking over many types of untreated floor surfaces: 250 – 12,000 volts

What is ESD? Charged personnel can cause ESD damage to static sensitive components Use of Statguard Flooring options and proper use of ESD Footwear will eliminate ESD damage to static sensitive components

ESD Vinyl Tile Conductive - Electrical Resistance: < 1 x 106 ohms Dissipative - Electrical Resistance: 1 x 106 to < 1 x 109 ohms 12” x 12”, 24” x 24”, 36” x 36” Thickness: 2.0mm or 3.2mm Lifetime electrical warranties and certified testing Ten year limited wear warranty Color extends throughout the tile Meets ANSI/ESD S20.20-2014 flooring required limit tested per ANSI/ESD STM7.1 and ESD TR53, and is suitable flooring component for personnel grounding Footwear / Flooring System.

Statguard Epoxy Conductive - 1 x 104 to < 1 x 107 ohms per ANSI/ESD STM7.1 or IEC 61340-4-1 Statguard® Conductive Epoxy provides superior static control and durability. Provides a flooring surface that does not generate a static charge and will act as part of the path-to-ground for an operator wearing ESD footwear. ESD Epoxy meets ANSI/ESD S20.20-2014 as tested per ESD S7.1. One Coat, 2-part, Water-Based Epoxy System Statguard Flooring expressly warrants that for a period of 5 years after the date of installation that our Statguard® Conductive Epoxy, when properly installed and maintained, will meet its published electrical specs under normal foot traffic and until mechanically removed or worn away. Made in America

ESD Rubber Tile Ideal for installation in Clean Room & Electronic Manufacturing Facilities Multi-colored and slip resistant Sound absorbent High durability compound Flexible and resilient Resistant to oil and grease Easy Maintenance Meets the required limits of ANSI/ESD S20.20-2014 for ESD flooring < 1 x 109 ohms

ESD Carpet Tile World class manufacturing environment Ease of maintenance Lifetime electrical properties Sound absorbent Anti fatigue properties Ease of repair / replacement Direct traffic pattern Meets the required limits of ANSI/ESD S20.20-2014 for ESD flooring < 1 x 109 ohms

Conductive Adhesive NEW! 8453 Solvent-Free Conductive Epoxy Adhesive Two-part urethane flooring adhesive with low volatile organic compounds (VOCs) for the 8400 Series ESD Vinyl Floor Tile 81521 - Conductive Vinyl Tile Adhesive, Two-Part Epoxy Two-part component conductive epoxy adhesives of syrupy consistency. It is formulated to bond where high performance, interior installation is required. 8403 - 2-Part Conductive Epoxy Adhesive, 135 Sq. Ft. Coverage, Standard Pack High solids, 2-part Epoxy Adhesive provides an efficient electrical ground plane underneath the entire floor to drain electrostatic charges to ground.

Grounding Strips & Weld Rods Copper Foil Ground Strip 2” x 24” - Multiple ground options to building ground or electrical outlets Rubber Weld Rod Permanently closes seams between Statguard Flooring ESD Rubber Tiles & Rolls

Static Dissipative Floor Finish and Floor Care Maintenance Products FEATURES AND BENEFITS APPLICATION TESTING MAINTENANCE

Why Use Statguard® Floor Finish? Static dissipative. Rtt = 107 – < 1 X 109 Ohms through 10% - 65% RH Charge decay to zero volts from 5,000 volts in .01 seconds Low Tribocharging, will not generate greater than 100 volts even under 10% RH High performance proprietary X-linked polymers for hardness and durability UL listed for slip resistance, high coefficient of friction Non-water whitening Used in clean rooms down to class 1,000 30 years performance history with Statguard® 18% Solids (Standard Statguard® Floor Finish) 23% Solids (Low-VOC Statguard® Floor Finish)

Statguard® Floor Finish Low humidity formulation provides greater durability and performance in all humidity environments Dissipative 1 x 106 to < 1 x 1010 ohms per ANSI/ESD STM7.1 and ESD TR53) and low tribocharging (<100 volts per ANSI/ESD STM97.2) Cross-linked polymer produces a glossy, long lasting, durable finish for a beautiful ESD floor finish that stands up to heavy traffic but is easier to strip UL classified for slip resistance 18% solids for easy application; improves productivity Lead-free RoHS, REACH, and Conflict Minerals compliant Responds well to spray buffing and dry burnishing to restore electrical properties and luster with minimal labor Made in the United States of America Part No. Gallons 46000 2.5 Gal Box 46001 5 Gal Box 46003 55 Gallons

Statguard® Low-VOC Floor Finish Better Hardness vs. Leading Competition – ASTM Standard D2134.93 Resists wear in order to maintain ESD performance longer Static Dissipative Zinc Free Floor Finish Convert hard non-ESD floors to ESD protective flooring Protect and enhance ESD permanent flooring (Vinyl, VCT, Rubber) Low-VOC - Meets CARB and other regional VOC requirements Dissipative Coating - (1 x 107 to < 1 x 109 ohms) - ANSI/ESD STM7.1 and ESD TR53 Low Tribocharging Coating - (<100 volts) ANSI/ESD STM 97.2 - 23% Solids - 2 Coat System - Reduces labor needed for initial install and on- going maintenance of the floor Lead-free RoHS 2, REACH, and Conflict Minerals compliant UL classified for slip resistance Made in the United States of America Part No. Gallons 46024 2.5 Gal Box 46025 5 Gal Box 46026 55 Gallons

Statguard® Neutral Floor Cleaner Labor saving dissipative cleaner leaves floor clean and free of insulative film with no rinsing Does not leave insulative residues behind Cleans Dissipative and Conductive floors and tiles Formulated with dissipative agents that rejuvenate the properties of Statguard® Floor Finish Lead-free RoHS, REACH, and Conflict Minerals compliant Made in the United States of America Part No. Gallons 46030 2.5 Gal Box 46031 5 Gal Box

Statfree® Burnishing Restorer Ready-to-use formulation that enhances gloss well beyond burnishing alone Uses standard burnishing machine - Clean and prepare the ESD flooring for burnishing in one simple step Keeps the wet look on floors without the need for refinishing Unique formula extends re-coat cycle Extends ESD floor electrical properties and restores gloss; reduces cost The surface resistance (1 x 107 to < 1 x 1010 ohms) meets the ANSI/ESD S20.20-2014 Lead-free RoHS, REACH, and Conflict Minerals compliant Made in the United States of America Part No. Gallons 46011 2.5 Gal Box

Statguard® Low Residue Floor Stripper Strips resilient floors with low pH formula Reduce rinse time and cutting labor costs by 20% over conventional strippers Low pH formulation is designed to break up and lift multiple layers of Statguard® Floor Finish High grade, non-ammoniated, biodegradable and phosphate free Lifts ESD floor finish from vinyl, concrete, rubber, terrazzo, quarry tile, brick, slate, and unglazed ceramic Lead-free RoHS 2, REACH, and Conflict Minerals compliant Made in the United States of America Part No. Gallons 46020 2.5 Gal Box 46021 5 Gal Box

Statguard® Benefits Easy to apply Turns standard flooring into an ESD protected floor Provides superior gloss with easy maintenance Provides a clear durable coating to allow grounding of mobile personnel and equipment Eliminates Tribocharging on mobile personnel and equipment Electrical properties verified using standard test methods

Application Tools Needed Rayon Mop Dedicated mop* Bucket Dedicated bucket* Statguard® Finish Quality ESD finish *Dedicated Tools Eliminate Contamination

Application Process Floor Prep Application Dry Time Strip away old finish Rinse 2 times or until pH is between 7 and 8 Let floor dry Application Standard - 3 coats / Low VOC - 2 coats Dry Time 45 minutes minimum each coat Light traffic overnight Last coat completely hardens in 72 hours

Testing and Certification Resistance to Ground (Rtg) and Surface Resistance (Rtt) using a Surface Resistance Meter Kit accordance with ESD Association documents: ESD TR53, ANSI/ESD S7.1, ANSI/ESD STM97.1, ANSI/ESD S20.20-2014 Charge generation using a Body Potential Meter Range: ±0.1 to ±999.9V Certification Certificate reflecting test results to be provided

Maintenance Techniques Dry Mop Gloss Damp Mop Clean Damp Mop Spray Buff Burnish

Dry Mop Program Benefit Equipment Untreated push broom or dry mop Process Removes dirt, grit and dust from wearing & scratching floor Benefit Once a night or as required. Frequency

Gloss Damp Mop Program Untreated push broom 3:1 water & Statguard® Floor Finish mix Equipment Push broom area Damp mop area Process Increases Gloss Removes dirt, grit and dust from wearing & scratching floor Benefit Once a week or as required Frequency

Clean Damp Mop Program Untreated push broom Statguard® Cleaner Equipment Push broom area Damp mop area Process Cleans heel marks and stains Removes dirt, grit and dust from wearing & scratching floor Benefit Once a night or as required Frequency Note: The clean damp mop process may reduce the tile gloss

Spray Buff Program Untreated dust mop Spray bottle (3 parts water to 1 part Statguard® finish) 175-1500 RPM buffer / white or beige pad Equipment Push broom area Spray and buff Process Repairs scratches, removes marks and stains Increases Gloss Benefit Once a week or as required Frequency

Burnish Program Untreated dust mop 1-2000 RPM Burnisher White pad Equipment Push broom area Dry Burnish 1-2000 RPM Dust mop Process Cleans heel marks Increases Gloss Benefit Once a week or as required Frequency

Statguard Flooring Team Carlos De La Isla VP of Sales Rob DaRosa Sales Manager Ricardo Garcia Mexico Channel Sales Manager Alyssa Smith Marketing Manager DescoIndustries.com

Sales Force Network Committed Partners - Reseller / Installers ICT - US Freda West - US Gana Pisos - Mexico Delta Millennium - Mexico Expanded Manufacturer’s Rep Network 90+ Desco Industries Reps

Master Distributors ICT – USA Freda West – USA Reseller and Installer Since 1996 ICT has been providing the finest Flooring services available in the industry. Based out of Saint Charles, IL. Freda West – USA Freda West is a flooring contractor that offers Statguard® Conductive Epoxy installation as well as other services. Based out of Lake Villa, IL.

Master Distributors Delta Millenium – Mexico Gana Pisos - Mexico Reseller and Installer For more than 10 years Gana Pisos have been providing the installation service of ESD vinyl floors, epoxy and carpets in the Mexican market. Based out of Guadalajara, Jalisco, México. Delta Millenium – Mexico Delta Millenium has more than 30 years of operation in the Mexican territory, time in which it has offered its customers the highest quality products and services in the international market. Based out of San Pedro Garza García, Aguascalientes, Cancún and Benito Juárez, Mexico City.

Recap Statguard Flooring can help you: Qualify the need Schedule the install Test the floor for compliance Guarantee floor performance Setup maintenance program with building service contractors

Website