Intel® vPro™ Technology Intel® Active Management Technology Setup and Configuration HP dc7800p USFF - Small Business Mode

Legal Disclaimer Intel Confidential – Intel Internal Use Only Copyright © 2008 Intel Corporation. All rights reserved. Intel, the Intel logo, Intel. Leap ahead., the Intel. Leap ahead. logo, Intel vPro, Intel Active Management Technology, and Intel Core 2 Duo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other names and brands may be claimed as the property of their respective owners.

Table of Contents Client Information Setup and Configuration

Client Information The following Setup and Configuration instruction as based on an Intel® Desktop Board. Depending on your motherboard manufacturer and firmware version, you may have a different interface or experience then what is listed in this presentation. Regardless, the following information should give you the basic steps for configuring any Intel® vPro™ client in Small Business mode.

What is Setup and Configuration? Setup and Configuration is the process that makes Intel® Active Management Technology features accessible to management applications. Before management applications can access an Intel® Active Management Technology device, the device must be populated with various configuration settings such as usernames, passwords, network parameters, Transport Layer Security (TLS) certificates (applies to Enterprise Mode), and keys necessary for secure communications.

Setup and Configuration

Setup and Configuration Power on the Intel® vPro™ client Press F10 to enter the BIOS setup

Setup and Configuration Select: English

Setup and Configuration Select: Advanced

Setup and Configuration Select: Power-On Options

Setup and Configuration Change MEBx Setup Prompt to: Displayed

Setup and Configuration Change POST Delay (in seconds) to: 15 Press F10 to Accept

Setup and Configuration Select: AMT Options

Setup and Configuration Change SOL Character Echo to: Disable

Setup and Configuration Change SOL Terminal Emulation Mode to: ANSI

Setup and Configuration Change SOL Local Keyboard to: Enable Press F10 to Accept

Setup and Configuration Go to File menu Select: Save Changes and Exit

Setup and Configuration Press F10 to Save Changes and Exit

Setup and Configuration During Reboot press: CTRL-P

Setup and Configuration You are required to change the Intel® Management Engine Password This is only required for initial setup and Configuration

Setup and Configuration Enter the password: admin This is only required for initial setup and Configuration

Setup and Configuration Select: Change Intel® ME Password This is only required for initial setup and Configuration

Setup and Configuration Password needs to be at least 8 characters, using upper and lower case letters, numbers, and symbols. Example: Acmec0rp!

Setup and Configuration Type your password to Verify.

Setup and Configuration This is the Intel® Management Engine main screen where you can make changes to the: Intel® Management Engine Configuration Intel® Active Management Technology Configuration Change Intel® Management Engine Password

Setup and Configuration Select: Intel® ME Configuration

Setup and Configuration Press Y to Continue

Setup and Configuration Select: Intel® ME Firmware Local Update Qualifier

Setup and Configuration Set to: [*] ALWAYS OPEN

Setup and Configuration Select: Intel® ME Features Control

Setup and Configuration Select: Manageability Feature Selection

Setup and Configuration Set to: [*] Intel® AMT

Setup and Configuration Select: Return to Previous Menu

Setup and Configuration Select: Intel® ME Power Control

Setup and Configuration Select: Intel® ME ON in Host Sleep States

Setup and Configuration Set to: [*] Desktop: ON in xxx Select the desired mode

Setup and Configuration Select: Return to Previous Menu Note: Depending on the changes made, your system may restart. If this occurs, please re-enter the setup by pressing <CTRL+P> when the system completes the restart.

Setup and Configuration Select again: Return to Previous Menu

Setup and Configuration Select: Intel® AMT Configuration

Setup and Configuration Select: Host Name

Setup and Configuration Insert Windows computer name. Our example is: vpro-pc1 set computer name as desired Important Note: In DHCP mode: The computer name must match the computer name in Windows In Static IP mode: The computer name must be different than the computer name in Windows. TCP/IP Configuration will be discussed in the upcoming slides. Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Select: TCP/IP

Setup and Configuration The Network Interface should be Enabled by default Press N to NOT Disable Network Interface

Setup and Configuration DHCP should be Enabled by default Press N to NOT Disable DHCP

Setup and Configuration Set the Domain name. Our example is: vprodemo.com

Setup and Configuration Select: Provisioning Model

Setup and Configuration By Default should be set to: Intel® AMT 3.0 Mode Press N to NOT Change to Intel® AMT 1.0 Mode

Setup and Configuration By Default should be set to: Enterprise Press Y to Change to Small Business

Setup and Configuration After Provisioning to Small Business the Intel® AMT Configuration menu will change Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Select: VLAN Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration By default VLAN is set to Disabled Press N to NOT Enable VLAN Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Select: SOL/IDE-R Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Press Y to Continue Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Set Username & Password to: [*] Enabled Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Set Serial Over LAN to: [*] Enabled Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Set IDE Redirection to: [*] Enabled Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Select: Secure Firmware Update Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Set to: [*] ENABLED Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Select: PRTC Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Can usually leave blank but if different then shown, change PRTC to: YYYY:MM:DD:HH:MM:SS Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Select: Idle Timeout Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Normally leave unchanged but if not 1 change to: 1 Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Scroll Down and Select: Return to Previous Menu Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration To Exit the Main Menu Select: Exit Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464

Setup and Configuration Press Y to Confirm Exit Once you Confirm Exit the system will restart and your settings will be in effect. Note: Each Client needs a unique name. If you have more then one here is an example naming convention: VPRO4462, VPRO4463, VPRO4464