LEDlescentTM T8 Ballast-Free Lamps

North American Market – T8 LED Options Replacement Lamps (UL Type A) SYLVANIA SubstiTUBE® Advantage: Energy savings; Minimal labor costs for installation, Cost Disadvantage: Ballast compatibility, Higher maintenance costs due to remaining life of existing ballast Internal Driver Line Voltage Lamps (UL Type B) Single Ended Not appropriate design: No SYLVANIA product Advantage: Cost, Energy savings, Low maintenance Disadvantage: Shock hazard; Higher operating temperatures; Non-passive failure of improperly re-installed traditional lamps Double-ended with switch SYLVANIA LEDlescentTM Advantage: Easy Installation, Cost, Energy savings, Low maintenance Disadvantage: Small labor for rewiring External Driver Lamps (UL Type C) SYLVANIA HE Kits / SubstiTUBE G8 Advantage: Energy savings; Safe design; Higher LPW capability; Longer life, Low maintenance, System solution Disadvantage: Labor Cost (Initial & Maintenance) Dual Technology (A&B) Advantage: Uses the current ballast now, can keep working on line voltage later Disadvantage: Single ended: shock hazard, Limited Ballast compatibility Deferred maintenance for limited budgets, direct wire as ballast fails

LEDlescent™ T8 Ballast-Free Lamps Ballast free lamps available in 2, 3 and 4 foot options Provide instant light and uniform light distribution. Double ended wiring schematic ensure safe installation Long life: 50,000 hours (L70) Power supply: No ballast needed, installed directly on 120-277V Uses either shunted or un-shunted sockets Versatile option for both T8 and T12 fixtures Warranty: 5-year limited lamp warranty (24/7 operation) Shape Wattage Lumens CCT (K) 4ft 17W 2100lm 2200lm 3000K/3500K 4100K/5000K 14W 1700lm 1800lm 3ft 12W 1650lm 2ft 9W 1100lm Applications General lighting Cove Lighting Display Case Parking Garage Tunnels

LEDlescent™ T8 Ballast-Free Lamps Features and benefits Double Ended – wiring schematic requires line wired to one end and neutral to the other eliminating any shock hazard associated with single ended direct wire tubes. Less expensive to install than single ended. No polarity - can be installed into any fixture in any direction. No Ballast Required - wired directly into 120-277V bypassing the existing ballast that may fail or may not be compatible. Lower cost of ownership than Type A lamps with potential ballast replacement. Flexible - compatible with both shunted and non-shunted sockets, removing the expense of replacing the existing sockets. Replaces medium bi-pin T8 or T12 fluorescent lamps in existing fixtures. Economical Simple Installation in 5 minutes and 20 seconds for a 4-lamp fixture. Reliable Long Life - 50,000 hour expected life; not dependent on the life of an existing ballast like Type A lamps. 4-foot Type B Lamps will meet the DLC rating.

LEDlescent™ T8 Ballast-Free Lamps Wiring Diagram Open until both ends are engaged in the socket; prevents shock LINE NEUTRAL Safety “switch” technology prevents current across the lamp when only one end is engaged “Double Ended” - Wire Line to one end, Neutral to the other No polarity: lamp can be installed in either direction Different than other models on the market (single ended, shock hazard) No issues with installing fluorescent lamps back into fixture (no light, burn out coil) Name indicates lamp is different than SubstiTUBE (no ordering mistakes)

LEDlescent™ T8 Ballast-Free Lamps - Installation Installation requires that a caution / warning sticker be applied Indicates fixture was modified. Informs any person after initial modification that this is no longer suitable to operate fluorescent lamps. Provides information on appropriate lamp for modified fixture LED17T8/L48/FG/841/BF

LEDlescent™ T8 Ballast-Free Lamps - Installation Each box of lamps contains an installation guide Contains warnings and cations and details of wiring schematic / diagram for 1-4 lamp scenarios.

LEDlescent™ T8 Ballast-Free Lamps 4ft Product Offering Item Number Ordering Description Lamp Wattage Replaces CCT Lumens Life Beam Angle DIM DLC 75024 LED17T8/L48/FG/830/BF 17 32W 3000K 2100 50,000 220° No Yes 75025 LED17T8/L48/FG/835/BF 3500K 75026 LED17T8/L48/FG/841/BF 4100K 2200 75027 LED17T8L48/FG/850/BF 5000K 75020 LED14T8L48/FG/830/BF 14 1700 75021 LED14T8L48/FG/835/BF 75022 LED14T8L48/FG/841/BF 1800 75023 LED14T8L48/FG/850/BF

LEDlescent™ T8 Ballast-Free Lamps 2ft & 3ft Product Offering Item Number Ordering Description Lamp Wattage Replaces CCT Lumens Life Beam Angle DIM DLC 75009 LED12T8/L36/FG/830/BF 12 32W 3000K 1650 50,000 220° No - 75010 LED12T8/L36/FG/835/BF 3500K 75011 LED12T8/L36/FG/841/BF 4100K 75012 LED12T8/L36/FG/850/BF 5000K 75013 LED9T8/L24/FG/830/BF 9 1100 Yes 75014 LED9T8/L24/FG/835/BF 75015 75016

Key TAKE AWAYS Safe solution minimizing risk No ballast compatibility issues Larger Case Size – 25 pack

Thank YOu