Brakes

Friction & Braking Friction: A force that opposes motion, it prevents the sliding between two surfaces that are in contact. Amount of friction depends upon: surface material surface finish force, acting upon the surfaces By using friction, brakes slow down or stop a rotating object.

Braking Action Brakes slow down a moving object by converting the kinetic energy of motion into another form. Most braking systems convert this kinetic energy into heat. The brake is cooled by moving air. If a brake becomes too hot, it will begin to lose its efficiency. This is called fade. Good brake design includes methods for adequate cooling of the brakes.

Brakes There are many different types of braking systems. Some of the more common types are: Disc Mechanical Hydraulic Pneumatic

Disc Brakes A friction pads is pressed against both sides of a rotating disc. This type of brake is commonly found on the front wheels of cars. They have good air flow around the brake which quickly dissipates heat.

Disc Brake

Mechanical Brakes Braking action is applied by physical force without the aid of hydraulics or pneumatics.

Hydraulics & Pneumatics Hydraulic and Pneumatic systems are closely related. Both use cylinders to produce a linear motion at varying speeds and forces. Hydraulics uses a fluid, hydraulic oil. Pneumatics uses air. Advantage of hydraulics is that oil can’t be compressed.

Hydraulic - Pneumatic System

Hydraulic Brake