S12X Full-Emulator: Pictures of the Emulator Hardware

S12X CPU-Module TARGET CONNECTORS – ALL S12X SIGNALS AVAILABLE FOR EASY PROBING TARGET CONNECTORS – ALL S12X SIGNALS AVAILABLE FOR EASY PROBING JUMPERS – TO SELECT S12X VOLTAGES FROM POD OR TARGET S12X CPU 2nd SILICON – (BLUEFIN2) WITH MANY S12X BUG FIXES LED INDI- CATORS PIN SOCKETS FOR THE CRYSTAL AND PLL- FILTER ANALOG SIGNALS TO BE NEXT TO THE S12X CPU S12X SIGNAL NAMES MARKINGS

S12X Emulator-Motherboard Port-Replacement-Unit (PRU) FPGA AND ICs – RECREATES PORTS A, B, C, D, E & K 8Mbit - Unlimited HARDWARE BREAKPOINTS (on the Print-Side) HOUSE-KEEPER COMMUNICATION CONTROLLER SYSTEM 2MByte EMULATION RAM CONNECTORS TO TRACE BOARD EMULATOR MAIN FPGA POWER SUPPLY CONNE- CTOR PC COMMUN- ICATION CONNE- CTOR CONNE- CTORS TO THE CPU- MODULE AND THE TARGET 2MByte SHADOW RAM (on the Print-Side) HIGH SPEED CONNE- CTORS TO THE CPU- MODULE 3.3V VOLTAGE REGUL- ATOR

New Trace Board for the S12X and HCS12 INDEPENDENT TRACE CLOCK TRACE FPGAS TRACE LED INDICATORS MISC CONNECTORS ALLOW SAMPLING USER-DEFINED 16 SIGNALS 8 MByte TRIGGERS & FILTERS RAMS FOR 8MByte OF S12X GLOBAL ADDRESS SPACE (component side & print side) TRACE RAMS 1,000,000 FRAMES 72-bit WIDE (component side & print side) TRIGGER-IN & TRIGGER-OUT CONNECTORS AND TPs

HCS12 Emulator Components * FLEX-CABLE ADAPTER ALSO AVAILABLE FOR THE S12X FAMILY

HCS12 Emulator Components

Escaping From the Target at Any of 4 Directions S12X & HCS12 Target Boards are often buried deep between modules, with very limited access to the target board. The Nohau Flex-Cable resolves this problem by allowing to escape from the target, and connect to the full-emulator, in any of 4 directions. The flex-cable is also designed for high-speed operation above 100MHz, and includes controlled impedance and shielding

System View

The Intuitive Seehau User-Interface