How to Fix Samsung Printer Error Code u1 2320? Call

Steps to Fix Samsung Printer Error Code u Call USA & AUS

SOFT RESET PRINTER Call USA & AUS Method 1

Switch off the printer. Call USA & AUS Step 1

Open the fuser unit and check it after checking reinstalls the unit. Call USA & AUS Step 2

Switch on the printer and check whether the issue is resolved or not. Call USA & AUS Step 3

FACTORY RESTORE PRINTER Call USA & AUS Method 2

Manually boot in to recovery mode. Call USA & AUS Step 1

Press back, home, and power button at the same time. Call USA & AUS Step 2

Now, a message displayed press any key to restore and press any of the working key to restore. Call USA & AUS Step 3

After restoration done switch on the printer and check Samsung printer error is resolved or not. Call USA & AUS Step 4

DIAGNOSE FUSER UNIT Call USA & AUS Method 3

Switch off the printer and remove fuser unit. Call USA & AUS Step 1

Check whether the fuser connector is connected properly. Call USA & AUS Step 2

Check and test the input voltage supply is normal. Call USA & AUS Step 3

Check if the thermistor is contaminated or twisted. Call USA & AUS Step 4

if any of the above checked part is faulty then order SMPS/HVPS board and fuser unit whichever is faulty replace it carefully and reinstall it in the Samsung printer. Call USA & AUS Step 5

If nothing is faulty and still facing error codes u in Samsung printer. Call USA & AUS Step 6

THANK YOU! CONTACT US AT: Printer Support USA/CA AUS