How to Fix Brother Printer in Error State? Call

Steps to Fix Brother Printer in Error State Call USA & AUS

RESET PRINTER Call USA & AUS Method 1

Switch off the printer and disconnect all the cables connected to the printer. Call USA & AUS Step 1

Without power supply press the power button for 10 to 15 sec. now, connect basic requirement cables. i.e power and connectivity cable.to the printer and switch on the printer. Call USA & AUS Step 2

Check if brother laser printer in error state is fixed. Call USA & AUS Step 3

CHANGE PORT SETTINGS Call USA & AUS Method 2

Open device manager. Call USA & AUS Step 1

Now select hidden items to be visible in view settings. Call USA & AUS Step 2

Now expand all ports and right click on printer port. Now, open port settings and select use any interrupt assigned to the port option. Call USA & AUS Step 3

Now also enable legacy plug and play detection. Click ok button and reboot the system. Call USA & AUS Step 4

CLEAN CARTILAGE Call USA & AUS Method 3

Remove the cartilage from the printer. Call USA & AUS Step 1

Clean contact of the cartilage by warm water using cotton. Call USA & AUS Step 2

Clean the cartilages using solution used to clean cartilage and reinstall it when printer ask for cartilage and reboot the printer. Call USA & AUS Step 3

THANK YOU! CONTACT US AT: Printer Support USA/CA AUS