How to Fix Epson Printer Error Code 0x97? Call

Steps to Fix Epson Printer Error Code 0x97 Call (US& CA) (AUS)

Unplug And Plug In Call (USA & Canada) (AUS) Method 1

Turn off the printer and unplug all the cables connected to the printer. Call (USA & Canada) (AUS) Step 1

Open door to remove cartilages to detach them and disconnect all the USB cables. Call (USA & Canada) (AUS) Step 2

Now press power button for approximately 60 seconds to drain the current stored in the printer. Call (USA & Canada) (AUS) Step 3

Reinstall all the cables and turn on the printer. Call (USA & Canada) (AUS) Step 4

Install the cartilages into the printer and check Epson wf-3640 error code 0x97 is resolved. Call (USA & Canada) (AUS) Step 5

Soft Reset Printer Call (USA & Canada) (AUS) Method 2

Perform step1 and step2 of method1. Call (USA & Canada) (AUS) Step 1

Wait till the printer to get silent and settled for around 5 minutes. Call (USA & Canada) (AUS) Step 2

Now press power button for around 60 seconds and without releasing the button insert the power cable to turn the printer on. Call (USA & Canada) (AUS) Step 3

After the printer is on release power button and check the error is fixed. Call (USA & Canada) (AUS) Step 4

Clean Mechanic Pad Call (USA & Canada) (AUS) Method 3

Switch off the printer and detach power cable. Call (USA & Canada) (AUS) Step 1

Remove the door of the printer. Call (USA & Canada) (AUS) Step 2

Dip tissue in warm water and wipe off the cleaning pad. Call (USA & Canada) (AUS) Step 3

leave tissue on the pad for 2 to 3 minutes. Call (USA & Canada) (AUS) Step 4

Remove the tissue and let the pad to get dry completely. Call (USA & Canada) (AUS) Step 5

Plug in the power cable and restart the printer. Call (USA & Canada) (AUS) Step 6

THANK YOU! CONTACT US AT: Printer Support (USA) (AUS)