Implementing Cisco IP Switched Networks (SWITCH) Cisco Dumps For More Info Visit This Link:

Exam Description This exam certifies the switching knowledge and skills of successful candidates. They are certified in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture. Recommended Training: The following course is the recommended training for this exam. Implementing Cisco IP Switched Networks (SWITCH) v2.0 Cisco Learning Labs for CCNP SWITCH v2.0 Cisco Certification Practice Exam by MeasureUp: SWITCH ( ) Implementing Cisco IP Switched Networks (SWITCH) v2.0

Exam Details Exam Code SWITCH Associated CertificationsCCNP Routing and Switching CCDP Duration120 Minutes Available LanguagesEnglish, Japanese No Of Questions30-40 questions RegisterPearson VUE

Sample Question: 1 Afterport security is deployed throughout an enterprise campus, the network team has been overwhelmed with port reset requests. They decide to configure the network to automate the process of re-enabling user ports. Which command accomplishes this task? A. switch(config)# errdisable recovery interval 180 B. switch(config)# errdisable recovery cause psecure-violation C. switch(config)# switchport port-security protect D. switch(config)# switchport port-security aging type inactivity E. switch(config)# errdisablerecovery cause security-violation Answer: B

Sample Question: 2 What is the command forconfiguring root guard? A. (config) spanning-tree guard root B. (config-if) spanning-tree guard root Answer: B

Sample Question: 3 Which feature is automatically configured when an administrator enables a voice VLAN? A Q trunking B. PortFast C. QoS D. private VLANs Answer: B

Sample Question: 4 An enterprise network has port security sticky enabled on all access ports. A network administrator moves a PC from oneoffice desk to another After the PC is moved, the network administrator clears the port security on the new network switch port connecting to the PC, but the port keeps going back into err-disabled mode. Which two factors are possible causes of this issue? (Choose two) A. Port security sticky exists on the new network switch port. B. Port security sticky is disabled on the new network switch port. C. Port security must be disabled on all access ports. D. Port security is still enabled on the older networkswitch port. E. Port security sticky is still enabled on the older network switch port. Answer: A,E

Sample Question: 5 The network manager has requested that several new VLANs (VLAN 10, 20, and 30) are allowed to traverse the switch trunk interface. After the commandswitchport trunk allowed vlan 10,20,30 is issued, all other existing VLANs no longer pass traffic over the trunk. What is the root cause of the problem? A. The command effectively removed all other working VLANs and replaced them with the new VLANs B. VTP pruning removed all unused VLANs. C. ISL was unable to encapsulate more than the already permitted VLANs across the trunk D. Allowing additional VLANs across the trunk introduced a loop in the network. Answer: A

Implementing Cisco IP Switched Networks (SWITCH) Cisco Dumps For More Info Visit This Link: