Baldor-Reliance® washdown motors September 2018 (Public) Baldor-Reliance® washdown motors

Why washdown? What is a washdown motor? Why are they needed? What washdown motors does ABB provide?

People like their food…

…to be clean!

Food sanitation The FDA has strict guidelines to ensure a safe food supply The Food Safety Modernization Act gives them the authority to shut down a food processing facility that does not comply Equipment in these facilities must be sanitized regularly The motors must be well suited for applications requiring high-pressure cleaning with caustic solution The key provisions of the Act that the manufactures must abide by are: Conduct hazard analysis Implement scientific “risk based” preventive controls Develop and implement written food/feed safety plans.   The FDA is required: To review safety plans every two years Evaluate health data Issue science based regulations Differentiate between human and animal foods The FDA is authorized to : Inspect facility records impromptu upon showing a written notice that a “reasonable belief” of serious hazard exists. And Inspect high risk facilities every 5 years Inspect other facilities every 7 years Hire 1000 new inspectors. Facilities have to re-register every 2 years

What’s the difference? General purpose motor Washdown duty motor If you were going to design a motor that could minimize the effects of water, what would you do? Some features you would add: Improve the sealing around the shaft - Enhance the paint Use stainless exterior hardware - Use better gaskets Provide drains - improved bearings General purpose motor Washdown duty motor

Washdown duty features Two-part epoxy painted top coat Rotor precision balanced and coated with an epoxy primer to resist corrosion 300 series stainless steel shaft, hardware and nameplate Easily removable condensation drains on each end The White washdown motor has been the workhorse of the food industry for over 30 years. Included in this photo are some of the main features that have been enhanced to make this motor washdown duty Neoprene rubber gaskets ensure a tight, waterproof seal Double sealed motor bearings Forsheda® slinger and contact lip seal

Stock washdown motor families White washdown Paint-free Stainless steel Stainless steel food safe 160 ratings 1/3 thru 20 Hp 50 ratings 1/2 thru 10 Hp 46 ratings 145 ratings 1/2 thru 30 Hp Single & three phase Three phase Foot mounted C-Face foot mounted C-Face footless The White Washdown motors is ABB’s signature motor line that has been on the market for more than 30 years. The Paint Free motors are the industry’s entry level, non-painted motor - These two motors are still used very widely, and are appropriate in areas that do not come into direct contact with food - These motors can handle wet environments When motors are in direct food areas, it is advisable to use stainless steel motors - Entry level stainless steel motors are all stainless and utilize gaskets & sealers on endplate fits - Food Safe stainless steel motors take all of the best features of the Stainless motors to the next level, which are highlighted in the following slides

Food safe motors Features you’ve come to expect All stainless steel construction Impervious to rust and deterioration Condensation drain holes with stainless plugs for thorough drainage Nameplate data laser marked on the frame Epoxy primed rotor for added protection Premium external and internal shaft seals Fully encapsulated windings But there’s more…

Food safe motors Baldor-Reliance® food safe motors, designed with smooth contours and advanced sealing, exceed IP69K for water to maximize motor life in high-pressure, sanitary cleaning environments.

Food safe motors Rotatable, round conduit box – Provides flexibility for lead orientation as needed, while water & contaminants easily flow from motor. Fully welded lifting lugs – Fully welded and polished lifting lugs on NEMA 180 frame and larger. Threaded hex lid – Thoroughly tightens to provide waterproof sealing. External drains & hardware – Smooth heads on drains and hardware reduce contamination. Dual O-rings – IP69K tested, watertight sealed. Fully welded, individual feet – Cleanable with no food collection points. Fully welded & polished conduit box – No water can penetrate, leak-proof. Encapsulated, color-coded leads – Easily identifiable leads with field tested, waterproof connectors.

Food safe motors When your food needs to be clean, so do your feet Typical competitor New food safe feet

Food safe motors Expanded features No fan and fan cover – eliminates potential for water and contamination ingress at the non-drive end of the motor. Footless motors – can be used in a variety of applications for trouble free sanitation where motor feet are not required. New single phase motors Foot mounted & footless 56C, 1/2, 3/4 & 1 Hp Fully welded conduit box & feet Capacitor & switch housed in watertight conduit box Same great features as food safe motor line Footless ratings – Baldor-Reliance food safe motors are available thru 15 Hp TENV ratings - while other motor manufacturers may offer TENV through 1 Hp, Baldor-Reliance® food safe motors are available 1/2 thru 3 Hp

Food safe motors Catalog numbers New prefix related to food safety easily identifies new catalog numbers Typical catalog number breakdown C SSE WD M 3558 T C FS WD M 3558 T -E NEMA T-frame -E = Encapsulated windings Baldor-Reliance® type number FS = food safe Three phase motor Washdown duty motor Stainless steel encapsulated Foot mounted C-face motor

Food safe motors The Future of Stainless When food safety is priority, choose food safe motors… Industry leading construction Tested to meet IP69 for water Fully polished external surfaces Designed to meet North American Meat Institute (NAMI) standards Largest selection of TENV motors available in the industry Largest selection of footless motors available in the industry NEMA 56C 1/2 thru 1 Hp 2 & 4 pole Single phase Foot mounted & footless NEMA 56C & 143-145TC 1/2 thru 2 Hp TENV & TEFC 2, 4 & 6 pole 3 phase Foot mounted & footless NEMA 182-184TC 3 Hp, 2 & 4 pole TENV 2 thru 5 Hp, 2, 4 & 6 pole TEFC 3 phase Foot mounted & footless NEMA 213-215TC 3 thru 15 Hp, 2, 4 & 6 pole TEFC 3 phase Foot mounted & footless NEMA 254-256TC 7 1/2 thru 20 Hp, 2, 4 & 6 pole TEFC 3 phase Foot mounted NEMA 284-286TC 15 thru 30 Hp, 2, 4 & 6 pole TEFC 3 phase Foot mounted

Food safe motors The future of stainless NEMA 286TC NEMA 145TC

November 7, 2018