Professor Jon Marangos, Head of Lab Dr Mark Richards, Deputy Head of Lab and Head of 3 rd Year Projects Mr Geoff Green, Senior Technician Mr Graham Axtell, Senior Administrator Professor Jordan Nash, Microprocessor Course 3 rd Year U/G Laboratory, Projects and Microprocessor Course 1

Agenda 1.3YL Introduction: Jon Marangos 2.Safety: Jon Marangos 3.Projects: Mark Richards 4.The Lab Team: Geoff Green 5.Microprocessors: Jordan Nash 6.Any questions? 2

3 What is 3YL for ? Third year lab is designed to teach you more advanced skills in practical Physics. You will work on difficult, less well structured physical problems, with limited guidance. The idea is that we are setting out to train you as professional physicists, and so we try to instil the necessary qualities, of independence, accuracy, recording your work, care, attention to safety. 3

Procedures: Lab Structure. -Standard Experiments (3 taken in one term for a total ½ course unit) - Many one-term Projects (½ course unit), covering a broad range of physics. - A short course and experimental work (worth 2 experiments: can be extended) on Microprocessors {A half unit typically = 3 short experiments; a full unit = 3 short experiments + 1 long project} 4

Procedures: What Lab Options Must You Take ? BSc Year 3:½ unit of lab (term 1 or term 2) + ½ unit project * in the other term + 4 options. - BSc Theory Year 3: Advanced Classical Physics (ACP: replaces Lab) + ½ unit project in the other term + 4 options. - BSc Physics with Music Year 3: 1 term project only (term 1 or 2) - MSci Year 3, and MSci Year in Europe Year 4: ½ unit of lab, in either term 1 or term 2 (No project) + 5 options - MSci Theory Year 3:ACP (replaces Lab) + 5 options - Occasional Students: Projects or short experiments as required by your home institute. You may do 1-term or 2-term projects as required. Plenty of flexibility. * The option also exists for an essay style project

Experiment Groups A/ "Astronomical image processing" & "Radiation laws" - Sergei Lebedev B/ "Waves on strings", "X-ray Diffraction" & "Laser spectroscopy" – Tim Sumner C/ "Hall effect" & "Photoelectric Effect" – Alex Tapper D/ "p-n junction" & "Boltzmanns constant by bi-polar p-n junction" – Subhanjoy Mohanty E/ "Compton effect" & "Waveguide experiment" - Mark Richards F/ "Solar radiation" & "Wind turbulence" - Oliver Buchmuller G/ Microprocessor Course – Jordan Nash

All experiments are pre-allocated based upon your preference submissions We believe this has been a very fair process that uses student happiness optimizer software A student happiness coefficient of nearly 100% has been achieved – this means you are all very happy We do not expect to change these allocations except under exceptional circumstances that can only be approved by the Head of Lab

- Lab hours: Monday Monday 2-4 Thursday 2-5 Friday hours per week - Students can work out of these periods, but ONLY during normal college hours (9-5) and if there is a demonstrator or technician present in the lab at the same time who is made aware that you are there. - Reports: full details on the web pages. 1 st and 2 nd marking. Forms and cover sheets available on web. 8 Procedures: Lab Hours and Reports

Laboratory Attendance Register The Laboratory Attendance Register MUST be filled in for each session Essential for Safety reasons and to be compliant with UKBA regulations Register located at entrance to Lab on Level 4 Blackett

Experiment cycles for this term 1st cycle: Sign on experiment Fri Oct 4th, complete by Thursday October 24th, report due Monday November 4th. [1st marking should be complete by November 11th with feedback made to student in the 1st half of that week] 2nd cycle: Sign on Thurs 31 st October expected to complete by Thurs 21st November, report due Monday 2nd December. [1st marking complete by Monday 9th December, with feedback that week] 3rd cycle: Sign on to next experiment on Monday 25th November, expected to complete by Friday 13th December, report due 1st Monday of 2nd term.

11 Reports - No joint reports. - Aim for words. - Maximum length 3000 words (6000 for projects). - Over-length reports will be penalised. - Any plagiarism will be dealt with severely. - Make sure you have treated errors properly – there will be a talk on errors in week 4. - There are extensive guidelines on report writing, plagiarism etc on line. Failing to read them will lose you marks. - Talk on report Writing, also in week 4.

Report Hand in and Feedback Hand in by deadline is ESSENTIAL, a ZERO mark will be given for any work handed in late Hand in requires BOTH on-line submission via Blackboard and deposit of a hard copy of your report in the office All handed in work is automatically checked for plagiarism Markers have been asked to return reports within 1 week, They must give you full feedback, but this is NOT a discussion about the mark which is only finalised after 2 nd marking. If you dont have your last report back at the end of the next experiment, go and visit the demonstrator to get some feedback before starting to write.

Mark scheme and marking template 15% Title/Abstract/Introduction 15% Experimental apparatus & method/Conclusion 55% Results, Analysis & Discussion, Error treatment (observations on your performance in lab will be factored into this mark) 15% Overall structure and presentation.

14 What are 3 rd year lab experiments like ? - An experiment guide is provided to orientate you and provide useful guidance – it is not intended to give step-by- step advice so expect to think for yourself - It may need some time to make things work before taking some good data. - You need to go beyond the guide to get a very good mark. -Time management is your responsibility, not ours! -You have 3 weeks (30 hours) to finish one experiment: then 1 week to write the report. -No need for more time than the timetabled lab hours to complete the experiment and report.

15 What to do this week. -You have already got a lab partner and have filled in your experiment preferences form (If not you had better get moving!) -Your pre-assigned experiments have been notified to you earlier this week, they are also on the noticeboard at the lab office -You start your first experiment tomorrow morning if you are doing lab this term 15

16 Things to note: Keeping a notebook and clear record You are obliged to keep a clear record of your work in a laboratory notebook The record in your notebook should be the basis of the report and will be discussed during the experiment with your demonstrator so make sure it is complete

17 Things to note: Demonstrators -They are there to help – do make use of them if you have a problem. -The technicians also know the experiments very well. -First try to solve problems for yourself. -Contact details on the web and on the notice board. - You may try to contact demonstrators outside lab hours. - All reports are 2 nd marked by Academic Staff 17

18 Things to note: Basic practice and forthcoming events - Talk on Errors & Report Writing by Dr Mark Richards, Thursday 24th October at 5pm.

19 Things to note: Occasional students 19 -You can do a mix of projects and short experiments as required by your home institute. -You are encouraged to get your IC tutor to read through a draft of your first report before handing it in. -If you have special requirements see Prof Marangos ASAP. 19

20 Safety

21 Safety in the Lab -Health & Safety is a major issue in the workplace -As Imperial graduates you will likely end up as leaders in your chosen field -You as Line Manager will be legally responsible for the Health & Safety of your workers -You should consider Risk Assessment and the Best Working Practice rules in Y3 Lab as part of your professional training 21

22 Safety in the Lab -Each Y3 Lab experiment has a Risk Assessment analysis form (a legal requirement in a UK workplace) -This details the risks (high voltage, high temperature, UV light source, laser, X-rays, cryogen, etc) associated with that experiment -Before starting the experiment you must: (i) Read and discuss the contents of the Risk Assessment form with your Demonstrator (ii) Sign a copy of the Risk Assessment form 22

23 Safety in the Lab Rules in Y3 Lab -NO eating or drinking and drink and foodstuffs not allowed in Lab (go out to take a coffee break) -Never work alone: (i) Work with Lab partner (ii) Must be Demonstrator/Technician in Lab -Only work in normal College hours (9-5*, Mon-Fri) -Outside normal Lab hours must sign-in / sign-out & inform Technician of your presence -Emergency (*medical only 9-5) - ext

24 Safety in the Lab 24 Also: -Act sensibly at all times. - Report any chemical spills. - Report any electrical faults. -Report any accidents, even if minor. -Turn off unused equipment. -NEVER look directly into a laser beam. -Understand the dangers associated with both your own and other peoples work (electrical, chemical, cryogens etc.) -Note: If you are carrying out a full Project in the Lab, you must do a Risk Assessment analysis

25 Safety in the Lab Remember: -Ultimately, you are responsible for your experiment and your actions -Protect yourself and your colleagues - work safely 25

Mondays 10:00-12:00, 14:00-16:00 Thursdays 14:00-17:00 Fridays 9:00-12:00 Jordan Nash - Microprocessor Course26 Microprocessor Experiment

The Course Goals are: Jordan Nash - Microprocessor Course27 To explain the inner workings of a computer at a fundamental programming level (assembler) with hardware interfacing. To teach you how to work independently and find for yourself everything you need for your project. – Hence, no book. Everything you need is on the Web – During the first weeks of the course, we will get you started with lectures and exercises to teach you what you the basics principles needed. To teach you to design, construct and document a commercial product To give you insight into the use of microprocessors which have a wide range of applications in automobiles, appliances and other industrial applications To give you useful career skills

Skills you will learn in the lab Jordan Nash - Microprocessor Course28 Designing basic electronic circuits and interfaces Understanding how a microprocessor functions and how to use one Programming in the microprocessors most basic language (assembler) including – the basic commands – writing a structured program – using tools to compile and download your programs to the microprocessor chip

The course is assessed on the projects you create Jordan Nash - Microprocessor Course29 You will use a microprocessor to create an application and construct something useful – Some electronics will be needed You will work through building some electronics in the first weeks of the lab – You will learn to interface the microprocessor with various devices There is a wide selection of possible devices to connect to the microprocessor – You will make a new product of your choice Many interesting inventions have been produced in the lab in previous years You will need to write a good and clear report on the product you have made, and demonstrate the functioning of your product.

Course Duration and Milestones Jordan Nash - Microprocessor Course30 4 weeks of lectures/training followed by 2 weeks for project completion and writing your report. The experiment ends on 22 nd November and amounts to 2.0 experiment units. It is possible to extend the work to a full-term project worth 3 units. FOR MORE INFO...

Course Sign-Up and Start Jordan Nash - Microprocessor Course31 We start tomorrow at 9am!!!!!! Decide on 2 or 3 units (later). FOR MORE INFO...

32 BSc Projects A chance to find out what real research is like Mark Richards

33 BSc Projects Compulsory for BSc & BSc Year in Europe students. MSci and MSci Year in Europe students do not do 3rd year projects. You have the opportunity to do extended projects in the 4th year. Assessment: -progress report (feedback given by supervisor) -viva (20%) -report (30+30%) -continuous assessment (20%) Students work in pairs for projects for one full term (10 hours minimum per week)

34 Types of Project Available. 3rd Year Lab based Projects Projects in the research groups - Experimental -Computational/Theoretical Projects Proposed by students 2 Term Projects : only allowed for Occasional or Erasmus students

35 What to do now? If doing a project this term find a partner and start looking at website for available projects asap. Web-site will be continuously updated. To book a project you must have agreement of supervisor and return a completed & signed registration form to level 4 office. Project cannot start until this is done

36 The Lab Team: Some Comments 36

37 The Team Geoff Green – Chief Technician Lee Parker – Senior Technician Graham Axtell – Administration Rob Whisker – Website Manager

38 The Laboratory Two Main Laboratories – Room 410 Blackett & Room 403Huxley Several small annex rooms Micro Course in First Year Lab Serving Hatch 4 th Floor Blackett Lobby

39 Procedures Keep the workplace TIDY – Bags & Coats – Tidying up at the end of experiment Safety – Risk assessments, special precautions, training and record keeping. Signage – information, warning,instruction. Please take time to read these properly. The lab is open for your use Monday to Friday 9 until 5. Just let us know you are there.

40 Facilities Undergraduate Workshop Getting machining done, Drill, Lathe, Bandsaw Using the other workshop facilities Storeroom Finding your way around, locating and identifying components and materials Working outside timetabled hours

41 Questions? 41

42 End